1, method 1: winding this is the easiest way to change the small ring, just at home. The specific operation method is to fill the gap between the finger and the diamond ring with a line (plastic wrap or adhesive tape) similar to the color of the diamond ring, so as to increase the volume of the diamond ring and reduce its volume.

2, winding method If the ring is just a little bigger, you can wrap it around the ring to make the ring smaller. First, prepare a soft thin thread, the color of which is preferably similar to that of the ring, and wrap it around the ring arm near the inside of the palm with a U-shaped cross to reduce the gap between the finger and the ring.

3, the small coup of the circle is as follows: circumvention: circumvention is a very traditional method, often seen by the older generation.

Cutting gold to make it smaller is a common method to change the size of the ring, but this method has limitations. The golden cutting method is suitable for rings with single supporting material, simple structure and more than five decorative patterns. Some rings are not suitable for changing size by cutting gold. I suggest you try the washing machine.

5. If the ring must be small, you can find a factory to do wire cutting and seamless welding or design without welding and trimming. The processing cost is about 100 to 200 yuan.

6. It is not easy to order a large diamond ring, but you can change a suitable ring number within three or five numbers. Emerald, Pearl and gem ring: It also depends on the specific style. If the inner wall of the ring is hollow or the ring arm is thin, it is not easy to change the ring. You can change money and a small ring number.

The ring I bought is too big. What should I do?

1, what should I do if the circle is big (four-pointed) winding method. This is a traditional method, often used by the older generation.

2. When the ring is large, it can be shrunk by washer, gold cutting and winding. Washer Washer is a simple way to replace the ring, but it is only suitable for small rings. The process is to make a washer with the same color as the original ring holder and then put it on the inner ring of the ring.

3. This method of washing machine needs to be carried out by a professional organization. The general practice is to make a washer with the same precious metal as the ring material, and then embed it on the inner wall of the ring to achieve the purpose of reducing the size of the ring.

Can you make the ring smaller when it is big?

1, diamond ring: depending on the style, the setting is the most complicated. If it is only a larger size, most of the repair and processing points can still be changed. Xinyu herself has learned to change rings, which is not nonsense. If there are too many rings, forcibly changing rings will easily lead to the danger of diamonds falling off. It is recommended to exchange gold for money.

2. If the ring is big, it can be sent to a professional jewelry store or luxury maintenance agency for replacement. There are many ways to change the size of the ring.

3. The ring can be shrunk if it is big. When you find that the ring doesn't fit, it's a pity to lose it. It will take time and money to buy it again. Then, in fact, if the diamond ring doesn't fit, you can modify the ring. But try not to change it if possible.

4. The washer is a circular part, made of the same material as the original ring fixer and placed in the ring; Cutting gold is the process of cutting off a part of metal and then welding. The cut metal can be returned to you, or as a maintenance credit, so don't worry too much. Can the diamond ring be made smaller when it is big? Diamond rings can be made smaller.

5, it seems that the personality has not been lost. The store has been resized. The insurance method is to take it directly to the store to change the size. Most specialty stores can provide after-sales service to restore the ring to its normal size. Note: If your ring is expensive, please try to choose a professional shop to modify the size to avoid loss.

What should I do if the jade ring is big?

1, looking for professional maintenance, the ring can be taken directly to the specialty store to change its size. Professional jewelry stores usually cut off a part of the ring by cutting gold, and then weld and polish it to reduce the size of the ring.

2, change the pendant: don't want to trouble, you can also choose a matching necklace and wear Yuhuan as a pendant around your neck, which looks elegant and generous.

If you just bought it, you can negotiate with the seller to change the code. If you can't change it, it's good to wear it as a necklace. Some time ago, my friend gave me a ring of Emerald Lulu. It looks good, but it's a little big. I just wear it as a necklace.

4, change the size, the jade ring can usually be taken directly to the previous store, so that the staff inside can help change it, so that it is not only comfortable to wear, but also does not have to worry about affecting the beauty of the fingers. Just because you can't wear a ring on your finger doesn't mean you can't wear it.