Are there any marks after the ring was changed? Generally, the number of rings is fixed, so our bodies can't be static. Some are fat, some are thin, so there will be a mismatch between the finger size and the ring finger ring size. At this time, many people will choose to replace the ring finger ring. Is there any trace after the ring is replaced?

Is there any trace after the ring is changed? 1 1. Is there any trace after the ring is changed?

Whether there is any trace after the ring is changed depends on the master's level. Generally, a good master will not leave any trace after changing the ring.

It is very common to buy a ring you like, but need to modify it because the finger ring number is not suitable. Many people may worry that the modified ring will affect the quality of the diamond ring. Actually, it's not like this. Now the jewelry technology is skilled, and the modified diamond ring usually won't hinder the later wearing, but this doesn't mean that the ring can be modified at will.

Generally speaking, whether the ring of a diamond ring can be modified or not, whether it can be modified to the ring number you need, must be sent to a professional jewelry store first, and the jewelry technician will test and analyze it before the post-operation can be carried out.

Second, what kind of ring can't be changed?

1, the ring support is thin, or the thickness of the whole body is the same, and the thickness does not exceed 1.00MM, or the whole body is slotted.

2. The ring body is solid, such as a square.

3. Most of the main stones or auxiliary stones become forcibly inserted.

4. Diamonds are easy to fall off after group setting modification, and the ring modification of permanent setting and invisible setting needs to be redesigned, or even the whole ring needs to be redone.

Third, does it matter if the ring is changed?

1. Generally, the ring is only allowed to be changed once, and in order to ensure the quality, the diamond ring should be inspected after one month to see if it has dropped.

It is a very high-tech correction to change the ring from small to large. As a result of this correction, the ring will become thinner and this ring will become very fragile. If you don't wear it properly, it will damage the ring holder.

3. When changing the ring, the extra ring will be removed, so it will have an impact on the value of the ring itself.

Generally speaking, there is no trace when changing rings, but this does not mean that you can change rings at will.

Is there any trace after the ring is changed? First, enlarge the ring finger ring.

There are several ways to change the ring finger ring, such as stretching, gold plating and polishing.

1, supports large

This is the simplest way, and the ring that needs to be changed in large circle size does not need complicated treatment. Choose a professional ring stick and just open the ring a little. Nowadays, most rings are made of metals with good ductility, such as K-gold and platinum, which makes it easy to enlarge the ring size. However, this way of expanding the ring through physical principles has great limitations.

Because there is a fixed interval for changing the number of rings, you can only choose another method outside this interval. Usually, this method can add 1 size at most, and it is not recommended to add too much.

Step 2 add gold

As the name implies, it is to cut the ring, add gold to enlarge the ring mouth, and then weld and polish it. This method is only suitable for rings with simple shapes and materials, not for rings containing fragile materials such as ceramics and mother shells. If you choose this method of changing rings, you must find a professional jewelry maintenance agency.

When adding gold to change the ring number, the ring is usually connected with precious metal of the same material as the original ring, which requires a certain metal fee.

polish

Ring finger rings can also be enlarged. Professional maintenance personnel use special instruments to thin the ring, which will increase the number of ring finger rings to a certain extent and make the number of rings larger. However, this method also has limitations. For the sake of ring quality, it is recommended to add at most two ring numbers.

Second, the ring finger ring is smaller.

There are several ways to make the ring smaller, such as washer, gold cutting and winding.

1, washer

Although the washer is a simple method to change the ring, it is only for the case of small ring. The process is to make a washer with the same color as the original ring holder and then put it on the inner ring of the ring. This method, like ring expanding, will not cause any damage to the ring. And if the ring gets bigger in the future, just take off the washer, which is very convenient.

Step 2 cut gold

The principle of cutting and adding gold is basically the same. Basically, it is to reduce the ring of the ring to a suitable full mouth, and then carry out follow-up work such as welding and polishing.

This method of changing the little finger ring is relatively safe, but it is not suitable for all rings. This method can generally be used for diamond rings and flat rings, but it is not suitable for rings with complex patterns.

3. Winding wire

There is also a relatively simple way to make the ring finger ring smaller, which is winding. You can wrap your favorite silk thread around the ring to reduce the ring. However, this way may affect the style of the ring, which is not very beautiful. Usually suitable for aperture gold rings, more elegant and concise.

Is there any trace after the ring is changed? 1. Can I change the diamond ring if it is too small?

1, most diamond rings can be made bigger and smaller. It's called changing the size of the hand. The common method is to cut the ring of the ring first, then add and subtract gold at the cut place, and then run the two interfaces together.

However, there are some special rings, and their rings cannot be changed. Generally, the staff who change rings will choose 3~4 rings to change, and if they exceed this number, they will not change, which is not conducive to the ring itself.

If the ring is inlaid with gems, we will go to the jewelry store and ask them to make the ring mouth bigger or smaller. There is no way to change the ring with patterns. If it changes, the pattern does not exist. You can only change the ring to another number by changing it. At this time, you also need to make up the difference. Generally, you won't be asked to exchange a ring cheaper than the original one, so you will get a refund. Shops don't usually do this.

Second, is there any trace after the ring is changed?

1. When changing the loop, the old master's craftsmanship is quite exquisite, generally leaving no trace.

2. At present, the methods of changing the ring mouth are welding polishing and electroplating, which will polish and electroplate the notch marks of adding or subtracting gold, and generally will not leave any traces. And now the technical level is more and more mature, as long as experienced teachers can do it.

3. When wearing a ring, be sure to avoid contact with bleach when doing housework. Bleach is easy to corrode the ring. We'd better take off our rings when swimming, because our swimming pool contains chemicals or harmful substances in seawater, which leads to metal oxidation.

4, the ring needs to be cleaned regularly, and the human body oil on the ring can be cleaned until it is shiny.