2. Pull out the crown in two, save the time mode, stop the watch hands and adjust the time to six o'clock, as shown in the figure below.
3. Then push the crown back to a section and adjust the date, as shown in the figure below.
4. Pull out the second section of the crown again, enter the time adjustment mode, and adjust the time clockwise, as shown in the figure below.
When the pointer rotates once and points to 6 o'clock again, if the date jumps, it proves that Beijing time is adjusted in the morning. If it happens to be adjusted in the morning, then the operation of adjusting to the current time is over. But if it is in the afternoon, you need to rotate it clockwise again, and then adjust it to the current time, so that the correct date and week can be displayed normally. After adjustment, push back the crown and put it on.
Extended data
Pay attention to your health
1. Soak in gasoline washing, that is, soak in gasoline washing, which can solve the problem of long-term accumulation of oil dirt blocking the watch and achieve the purpose of maintaining the watch.
2. Check the internal parts of the watch. If the nut is broken, screw it out with a screwdriver. Then take out the broken screw, which can handle the failure of the internal parts of the watch and maintain the watch.
3. Wash watch oil. The winding shaft does not rotate flexibly, and the long-term accumulation and blockage of grease is one of the factors that cause the failure of the watch. Severe obstruction is actually a hoop, and if it is wrapped hard, it will inevitably lead to broken teeth. It is appropriate to soak it in gasoline and wash it. There is no axial or radial gap between the box wheel and the box cover of the rod shaft, which is another factor of ineffective rotation. Should refer to the renovation method of box wheel.
4. Remove the broken nut of the watch, which will affect the performance of the watch if it is left untreated for a long time. The big steel wheel screw of the watch broke thousands of shafts. Most steel wheel screws use forward screws, and a few foreign mechanical watches use reverse screws. If the rotation direction of the big steel wheel is not clear, the nut will often fall off. If the big steel wheel loses the fastening of the screw, when winding the watch, it will come out of the square section of the winding shaft and will not drive the winding shaft to wind.
Baidu Encyclopedia-Chopin (Swiss watch jewelry brand)
Chopin Chopin China Official Website-Customer Service