Although I don't do pricing scales, I still have a certain understanding of the products of my peers.

The price of this electronic scale you mentioned is about 3500 yuan.

Product introduction

Weighing (dividing value) of SM- 100B platform-type label printing electronic scale at SISG: 3/6kg (1/2g), 6/ 15kg (2/5g),15/30kg (5//KLOC-30kg).

Memory: 1MB(4000 PLUs), 2MB(8000 PLUs) is optional.

Preset key: 42 (sm-100b/p)/56 (100h)/74 (100ev).

Display: 22-bit 19 segment red LCD Wuhan Sigang SM 100 bar code means for sale.

Sigang SM- 100B Platform Label Printing Electronic Scale Thermal Printing: the maximum width is 60mm (label paper) /60mm (receipt paper).

Maximum printing speed: 80mm/ s (label paper), 105mm/ s (receipt paper).

Maximum label size: 60mm (width) × 220mm (length)

Standard interface: RS-232C, cashier box interface, Ethernet.

Optional interface: radio frequency, IEEE, 802.11b.

Sigang 100 model: SM- 100B (platform type), SM- 100P (vertical arm type),

SM- 100H (suspension type), SM- 100EV (high position type)

Official website of Sigang Weighing Instrument is:/You can also go and have a look.

Setting method of Sigang electronic scale

I. National version:

[Zero ]+3752, [Zero]+[Automatic] (press both keys at the same time), press [3] (for China), press [Print], press [1], press [Print] and press [Clear].

2.Do 14 1:

Zero+14 1

Step 1: 0X4, press [Print]: set the barcode format.

Step 2: 3X28, press [Print]: Set the leading position of the store name.

Step 3: 24X 16, press [Print]: set barcode.

Step 4: 4 1X0, and press [Print].

Step 5: 42X0, press [Print].

Step 6: 49X2, press [Print] to set up networking.

Step 7: 50X 1, and press [Print] to set up networking.

Step 8: 127X 1, and press [Print].

Step 9: 135X 1, and press [Print] to set the IP address of the scale number.

Step 10: 168X 1, press [print], press the save key [#], and then press the [M] key three times.

Three. Do 142

Set it to zero +3752, set it to zero+1629x3, and press [Print]: set the decimal point to take two digits at the same time and round it off, then press [#].

Press [M] three times again, turn off the machine (press the switch on the machine first, then press the power supply), set zero+paper feed, and then press [Clear key].

4. Make the label free form (* Note: Example: 58X34 label paper, the actual situation depends on the length and width of the printed label paper).

Enter [M], [zero], [M], 12X 1, press [print], press [peel off]: (set label paper size) Enter: 58 (length), press [print],

Enter 30 (width), press [Print], and then press 0 (select zero angle).

2. Set the label-free format

Total price: 2X, press [Print] (enter the setting on the second floor); X axis: 42, press [Print]; Y axis: 2, press [Print]; Zero angle selection: enter 0.

Press [Print]; Select the printing status again: enter 3 and press [Print]; Select the font again: the same as the seventh key on the left keyboard [

Select here: M3

Unit price: 3X, press [Print] (enter the three-tier setting); X axis: 30, press [Print]; Y axis: 13, press [Print]; Zero angle selection: enter 0.

Press [Print]; Select the printing status again: enter 3 and press [Print]; Select the font again: the same as the seventh key on the left keyboard [

Select here: M 1

Weight: 4X, press [Print] (enter the four-layer setting); X axis: 45, press [Print]; Y axis: 13, press [Print]; Zero angle selection: enter 0.

Press [Print]; Select the printing status again: enter 1 and press [Print]; Select the font again: the same as the seventh key on the left keyboard [

Select here: M 1

Production quantity: 5X, press [Print] (enter the five-level setting); X axis: 47, press [Print]; Y axis: 13, press [Print]; Zero angle selection: enter 0.

Press [Print]; Select the printing status again: enter 2 and press [Print]; Select the font again: the same as the seventh key on the left keyboard [

Select here: M 1

Packing date: 6X, press [Print] (enter the settings on the sixth floor); X axis: 2, press [Print]; Y axis: 13, press [Print]; Zero angle selection: enter 0.

Press [Print]; Select the printing status again: enter 3 and press [Print]; Select the font again: the same as the seventh key on the left keyboard [

Select here: M 1

Product name: 8X, press [Print] (enter the eighth floor setting); X axis: 20, press [Print]; Y axis: 2, press [Print]; Zero angle selection: enter 0.

Press [Print]; Enter the print area (length: 35, width: 10) and press Print; Select the printing status again: enter 3 and press [Print];

Save date: 10X, and press [Print] (enter 10 floor settings); X axis: 17, press [Print]; Y axis: 13, press [Print]; Zero angle selection: enter 0.

Press [Print]; Select the printing status again: enter 3 and press [Print]; Select the font again: the same as the seventh key on the left keyboard [

Select here: M 1

To make barcode: 12X, press [Print] (enter 12 floor settings); X axis: 2, press [Print]; Y axis: 1, and press [Print]; Zero angle selection: enter 0.

Press [Print]; Bar code height: 10, press [Print]; Select the printing status again: enter 3 and press [Print];

Store name setting: 13X, press [Print] (enter 12 floor setting); X axis: 16, press [Print]; Y axis: 22, press [Print]; Zero angle selection: enter 0.

Press [Print]; Print area: length (50) and width (8 ~10); Select the printing status again: enter 3 and press [Print];

Finally, press the Save key [#], and then press [M] three times to exit.

* Description: (1) Print status:

0: Do not print

1:1:1stprin (price not printed)

2: No weight (do not print weight)

3: Print All (Print All)

(2) Font: S 1-S5, M 1-M5.

(3) Modify each layer: first enter [M], [zero], [M], 12X 1, and press [Print] and [Strip]; Press [Print]; Press [Print];

Input: 0

Then press the corresponding layer: (for example, 2X, press [Print]) to modify it.

Finally, press [#] to save.

Five, edit the commodity name, unit price, bar code file:

[M], set to zero, [M], press 1 (select the corresponding edit key, such as 2, 3, etc. ), enter the unit price, and click Print; Enter the product name (corresponding to the Chinese characters in the Chinese character library and find the corresponding code), and select the font: press [Font 55] on the left keyboard and press [Print]; Enter 3 and press [Print]; Enter the corresponding barcode, press [Print], and then press the Save key [#]; Enter 3[M] again and exit.

* Description: Enter the barcode, press [Print] and then [Print], that is, what is the storage date: corresponding setting: enter the number of days.

Six, edit the store name file:

[M], set to zero, [M], 5X 1, and press [Print]; Enter the name of the store (corresponding to the Chinese characters in the Chinese character library, find the corresponding code), select the font, press [55 Font] on the left keyboard, and press [Print]; Press [#] again to save, and [M] three times to exit.

Seven, preset key:

Press [M] first and set it to zero. [M], 4X 1( 1: is the original key; It can also be 2, 3 ... etc. ), press the key corresponding to the left keyboard, and then press [M] for 3 times to exit;

Operation: Press the key corresponding to the left keyboard, and then press [Print].

Eight, do calibration method: debugging the maximum weight of the scale)

At the bottom of the scale, unscrew the screw ON the corresponding bottom plate, find a power switch button in it, pull it to the ON position, set it to zero +3752, then set it to zero +87 15, and display: CAL00, and press [Print]; Display: CALSP. Put the weight (15kg) and press [Print]; Press zero, press [M] 3 times, and then press Save [#]. Turn the switch to the off position, and then turn it off. After the boot, the display is zero.

Nine, adjust the position of the print head:

Press and hold zero +5 14 at the same time, then enter the number of digits: either positive or negative (negative: enter the number first, then press [-]), then press [#] to save and then press.

[] Paper key, test.

X.IP address settings:

Zero +3752, zero +04 167, enter the first three digits of the IP address: for example, 192. 168.000.

The last bit is the title: (change its title: zero+14 1, 135x 1, and enter the corresponding title).

XI。 Automatic printing:

Press the [Auto Print] key, enter the product number, put in the item, and print automatically; To switch to manual, just press it again.

[Auto Print] key.

Twelve. Erase memory:

Before starting the machine, press [zero]+[paper feed], then start the machine to display clear, and then press [clear] to wait for the original state to be restored.

Thirteen. Print quantity

Enter the product number, then press [X], enter the quantity, and then press [Print].

Just try it. If not, you may have to read the instructions yourself.

By the way, put a small advertisement, our company specializes in producing small scales:

Website name: SINO Weighing Apparatus Co., Ltd.-specializes in manufacturing all kinds of high-precision electronic scales (electronic scales), electronic pocket scales, jewelry scales, kitchen scales, nutrition scales, human scales and health scales.

Website:

Website Description: Specializing in manufacturing all kinds of high-precision electronic scales (electronic scales), electronic pocket scales, jewelry scales, kitchen scales, nutrition scales, human scales and health scales.