First of all, there are several ways to set a ring with precious stones.
1, pin setting
Diamonds are tightly wrapped by rectangular metal claws or columns. The advantage of pointed inlay is that there is less metal covering the diamond, so that the diamond can be clearly and perfectly displayed, which is beneficial to the incidence and reflection of different light and makes its diamond more shiny. At present, the fork head is equipped with six claws, four claws and three claws, of which six claws are the most popular.
2. Package Settings
All diamonds are embedded in the metal frame/bracket below the waist, so that the diamonds can be well fixed and will not fall off. This setting is also the oldest ring setting method, which can not only show the brilliance of diamonds, but also reflect the dignified and peaceful temperament of the wearer.
3. Forced mosaic (card mosaic)
Because metal has good tension, using this feature, diamonds are fixed from the waist or the lower tip of the waist. In layman's terms, it is to make a shallow groove on both sides of the metal, and then put the diamond in and fix it. This is also a very popular mosaic method at present, and it is also liked by many young people.
4. Groove group
First, cut a groove in the precious metal, and then clip the diamond into the groove. This inlay method is suitable for diamonds with the same caliber, and then put them into the groove one by one, while the metal on both sides is responsible for supporting the diamonds, which will make the jewelry look smooth and safe to wear.
5. * * * Dental inlay
With two gears, the left and right adjacent diamonds are fixed, so that the diamonds can be more compact and the appearance will look simpler without gaps.
6. excellent
When setting a diamond on the metal edge, first use a special tool to nail the diamond so that the diamond or metal claw can't be seen on the surface, so that the light can shine on the diamond.
Second, the step analysis of diamond ring setting
First, wax trees are planted, then the planted wax trees are poured into an inverted mold, and then metal raw materials are added, and then high-temperature treatment is carried out to form the prototype of an annular support. Because it is rough, it needs fine polishing. Polishing has three steps. First, connect the bowl mouth of the diamond with the bracket, then make a groove inlaid with diamonds, and polish it once after inlaid with diamonds. Finally, it will be electroplated in electroplating solution, or polished after lettering, and this is completed.
Let me sum up: learning makes people progress. If you want to learn the steps of gem ring and diamond ring setting, you can see what I shared above. The above content is to explain the relevant knowledge of gem-inlaid rings, hoping to help friends.
Break the gender stereotype of jewelry
Use jewelry to add figure and interpret fashion attitude.
To be the most exquisite gentleman, you need to realize that jewelry