If the ring is reduced to one or two sizes, it may be necessary to cut the ring, remove the next ring, and then weld it.
Modifying the number of laps within three times generally does not have much impact. If the number of rings is modified more than three times, the ring wall may be deformed, especially the ring wall style inlaid with gems may be changed to four or five times, and the matching stones will fall off.
Therefore, changes within three numbers have little impact, and changes above three numbers should be considered as appropriate. Generally, experienced and skilled experts will change the circle without trace.
Many people may worry that the modified ring will affect the quality of the diamond ring. But in fact, now the jewelry making process is skilled, and the modified ring finger ring usually does not hinder wearing. After careful polishing, the modified ring looks the same as usual, leaving no obvious traces.
The ring can't be modified at will. Generally speaking, whether the ring of a ring can be modified or not can be modified to a satisfactory ring number, which can be sent to a jewelry store for testing and analysis by a jewelry technician, and then the post-operation can be carried out after the modification is confirmed. ① Thin ring: It is not recommended to change the ring for the thin ring holder, for example, the thickness is less than 1.00MM, or the whole body is slotted.
② Non-circular rings: Not all rings are round, but square rings are also one of the common styles on the market. This kind of ring is not suitable for modifying the size, which will affect the shape of the ring.
③ Clip-on ring: There are many main stones or auxiliary stones, so the style of this ring should not be changed. Changing rings at will affect the firmness of diamonds.
④ Group setting ring: Modifying the group setting ring is easy to make the diamond fall off, and the rings set by permanent setting method and invisible setting method need to be redesigned, or even the whole ring needs to be redone.
⑤ Platinum ring: It is not recommended to adjust the ring number casually for platinum rings. Platinum has a high melting point and a soft texture. In the process of adjusting the ring number, it is easy to deform and make the diamond loose, especially in the style with auxiliary gemstones. Ordinary platinum rings can be adjusted according to specific styles. It is recommended to adjust only half to one size. It is too big to deform easily. If the strength of the diamond ring is not well grasped when modifying the ring, it may lead to tiny cracks on the surface of the diamond and affect the quality of the diamond. The diamond ring after changing the ring generally needs to be re-inlaid. Therefore, after replacing the ring, it is necessary to focus on testing the stability of the diamond to see if there are any signs of loosening, and then you can wear it with peace of mind after confirming it is firm.
So the ring must be sent to a professional jewelry store. After replacement, carefully check whether the diamond surface is intact and other issues.
Rings with complicated styles are likely to leave some marks after being changed because of poor workmanship. If you care about such defects, you must measure the size of the ring when buying it, so as to avoid the trouble of secondary processing and make it more comfortable to wear.