In the rapidly changing and ever-changing new era, more and more people will use the letter of guarantee, which has the characteristics of taking an oath. What kind of protection have you seen? The following is my carefully organized 10 quality assurance paper for reference only. Welcome to reading.
Quality Assurance Terms 1 Dear Buyer Partner:
I am glad to have the opportunity to do business cooperation with your company. I hope the two sides can cooperate for a long time on the principle of "mutual respect, equality and mutual benefit, hand in hand and sincere cooperation".
Our company can promise and guarantee.
1. Our principles are: honesty and mutual respect, equality and mutual benefit, hand in hand and sincere cooperation;
2. Our company has passed the iso900 1(xx version) quality system certification.
Products comply with sonyss00259 and EU rohs environmental protection directive.
3. Our company has a group of professional production and R&D technicians who can provide customers with perfect service and technical support.
4. Your company must carry out ex-factory inspection and judgment on the products provided by our company, and the products can be produced and used only after iqc sampling inspection is qualified.
5. If your company must conduct sampling inspection before using our products, please contact the negative person of our company as soon as possible to solve any unqualified products.
Without the consent of our company, the consequences caused by the application of our products on your board of directors have nothing to do with our company, and your company will bear it by itself.
6. When both parties confirm that the defective products are our responsibility, but our company fails to handle them within the specified time, which leads to your company's special procurement and full inspection of the defective products, or our company entrusts you for special procurement and full inspection for special reasons, and our company agrees, the OEM fees for full inspection inside and outside the production line are calculated normally; The penalty notice issued by your company is faxed to our company for approval, and the penalty will be deducted from this month's payment.
7. Our company will strictly strengthen quality management, and the warehouse will strictly implement the system of "double inspection in and out".
8. Matters not covered in this Agreement shall be settled by both parties through consultation. If negotiation fails, it shall be submitted to the local court for litigation, which shall take effect after being signed and sealed by both parties.
In duplicate,
Party A and Party B each hold one copy.
Finally, I wish both of us:
Sincere cooperation!
Party A (seal):
Party B (seal):
Representative of Party A:
Representative of Party B:
Date:
Date:
Quality Assurance Chapter II Dear Customer:
First of all, thank you for choosing our products!
In order to ensure the product quality, clarify the product quality responsibilities of the buyer and the seller, ensure the product quality is qualified and ensure the product safety, the following guarantees are made:
1. The supplier shall provide the buyer with a copy of the production license and business license stamped with the official seal of the supplier.
2. The supplier shall provide the buyer with a copy of the product standard stamped with the official seal of the supplier.
3. The supplier guarantees that the products supplied meet the legal quality standards, and is responsible for the product quality, and provides the buyer with necessary quality information, such as product inspection reports and other relevant materials when necessary.
Four, the supplier's product packaging, registered trademarks, etc. Comply with the relevant provisions of the state.
5. The buyer shall store the products in strict accordance with the storage conditions indicated on the product packaging, and the buyer shall be responsible for the product quality problems caused by the buyer's poor storage and maintenance of the products.
Six, consumer complaints about product quality problems, suppliers should actively cooperate to properly solve, if it is the responsibility of suppliers, suppliers should bear all responsibilities and expenses.
Xx limited liability company
Chapter III Quality Assurance The National Jewelry and Jade Quality Supervision and Inspection Center (hereinafter referred to as the inspection center) is a national professional quality inspection institution authorized by the relevant competent departments of the state according to law, and it is the authoritative institution for jewelry and jade inspection in China. It plays a guiding role in standardizing the domestic jewelry market and promoting the healthy development of the jewelry industry.
The diamond grading system used in the national inspection is mainly based on the cut, color and purity of diamonds. The highest grade is the rarest and most valuable diamond, and the lowest grade is the lowest. Certificate number: the identification certificate number of jewelry.
Inspection conclusion: Describe the types of diamond ornaments.
Total mass: Describe the total weight of diamond ornaments.
Shape: Describe the shape of a diamond.
Color: describes the color grade of the diamond.
Clarity: describes the clarity grade of a diamond.
Table width ratio: describes the ratio of table to diameter in diamond cutting.
Senkaku depth ratio: describes the ratio of Senkaku depth to diameter in diamond cutting.
Precious metal detection: metal materials used in diamond jewelry.
Remarks: Explain other characteristics of diamonds not mentioned in the report.
Quality assurance 4 1. Our company will provide legal and valid copies of documents and materials in strict accordance with relevant state regulations, and affix the company's red seal. The economic losses and related legal liabilities caused by incomplete or invalid certificates and materials provided by our company shall be borne by our company.
2. The quality assurance of drugs provided by our company meets the requirements of national pharmacopoeia standards and related quality standards.
3. In order to ensure the imported drugs provided by our company, it is necessary to provide the required copies of the Import Drug Registration Certificate, the Pharmaceutical Product Registration Certificate and the Import Drug Inspection Report issued by the port drug inspection office, and affix the red seal of the quality management department of our company.
4. Ensure that the drug packaging and instructions provided by our company meet the requirements of relevant national laws and regulations.
If the drugs provided by our company have quality problems, our company solemnly promises to bear direct economic losses and related legal responsibilities.
6. Our company will actively cooperate with the relevant personnel of the hospital to keep and maintain the drugs according to the requirements of the drug instructions, and the drug losses caused by improper storage shall be borne by our company.
7. Our company guarantees to prevent any of the following drugs from appearing in hospitals and health centers:
(a) drugs that do not meet the requirements of the above quality terms;
② Drugs with abnormal quality or unqualified judgment;
(3) Drugs whose packaging is polluted, damaged, the packaging label is blurred or falls off;
(4) Drugs without manufacturer's brand, batch number, production date or expiration date.
8. Our company will actively provide high-quality and low-priced drugs according to the requirements of the hospital to ensure the safety and effectiveness of patients' medication and ensure that patients' interests are not infringed.
Quality Assurance Chapter V I. Quality Assurance System
In order to achieve the above quality objectives, this project will organize an excellent project management team to be responsible for the construction of this project, establish a quality assurance system, and earnestly implement quality management measures. Under the guidance and supervision of government quality supervision departments, owners and supervision companies, with the project management department as the core, a detailed quality management network is established to achieve quality management objectives.
Second, the quality assurance measures
The quality management of this project will be organized and implemented in strict accordance with the requirements of the construction unit and the current national construction specifications, and the quality management work will be carried out with the project quality management objectives as the center.
1. training and education: do a good job in the education of workers' quality awareness and establish the view that "quality is the life of an enterprise".
2. Establish the responsibility system, implement the post responsibility system including the project, formulate a strict reward and punishment system, and strictly control the project and all links.
3. Implement the work instruction: prepare the quality plan, prepare the detailed work instruction and special plan according to the key working procedures and special working procedures, and organize the construction only after it is reviewed by the project manager and sent to the supervisor for approval.
4. Strictly control the quality of materials: organize material procurement according to the company's procedure documents. The budget officer provides the material plan, and the material officer intervenes in the market to shop around in advance, conducts qualification examination on suppliers, and establishes a list of qualified suppliers. Before ordering, submit the supplier list to the owner for review and approval. All materials entering the site shall be provided with product certificate or warranty for verification by the site supervision engineer. The materials that need to be reinspected shall be sampled and reinspected as required, and their status shall be indicated. It can only be put into use after re-inspection. Carefully select the decoration engineering materials. The specifications, varieties and colors of the purchased decoration materials shall be approved by the owner and meet the design requirements and current material standards.
5. Strictly control the quality: control and manage the project construction quality with "process quality".
Technical disclosure shall be made to the construction technicians of major processes in advance, and the quality of "on-site inspection" shall be tracked and controlled. The quality inspector shall conduct process inspection on "process quality" to ensure product quality with process quality. The "three-level" management system shall be strictly implemented for engineering quality and concealed engineering acceptance. The next working procedure can only be carried out after the team has passed the self-inspection. The quality acceptance of the unit project will be carried out in stages, and the partial project will be inspected and accepted in time. Adopt basic elements and work quality to achieve the quality objectives of this project.
6. Convene regular production meetings and quality meetings: establish a system of regular production meetings and quality meetings, regularly summarize and evaluate the recent work quality, study the plans and objects of quality work, formulate correction and optimization plans, and promote the continuous improvement of engineering quality.
7. Template guidance: The application of construction quality management methods such as "template item", "template room" and "template layer" to major sub-projects or key parts is very beneficial to the overall construction and smooth development of the project.
Three, partial project quality assurance measures
(A) template engineering quality assurance measures
1. Before each use of the formwork, the surface smoothness of the formwork shall be comprehensively checked, and there shall be no residual concrete slurry. Must be carefully cleaned and sprayed with release agent.
2. Before template installation, check the position, size, specification, quantity and fixation of embedded parts, Rachel bars and reserved holes, pay attention to the cooperation with installation, and ensure that the pipeline in the wall is embedded before mold sealing. Before the template is installed, the garbage and sundries in the template should be removed, and the floating ash should be cleaned.
3. Beam-column formwork shall be maintained by special personnel. When there are obvious gaps in template flat-fell seam, greasy sub-batch caulking must be adopted to ensure smooth surface and square seam. Dismantling the formwork must be approved by the project engineer, and the formwork can only be dismantled with a notice of formwork removal.
4. When the template is corrected or dismantled, it is absolutely not allowed to pry with a stick or knock with a sledgehammer, and it is not allowed to leave traces of shovel or hammer on the template.
5. The quality of the wooden model itself should be carefully checked: the surface of the wooden model has peeling and the middle plate has deteriorated.
Do not use; Wooden purlins and wooden joists shall not be used if they are not straight; Template filling must be serious, standardized, consistent and rigorous.
6. The allowable deviation of the template
(2) Quality assurance measures for reinforcement engineering
1. Before the construction of reinforcement engineering, the list of ingredients should be put forward according to the design drawings, and the design requirements of joint distribution and stagger should be met. Lap length, hook, etc. Comply with the design and construction specifications. When varieties and specifications need to be replaced, they should be approved by the design unit and go through the formalities.
2. The steel bars used shall have the ex-factory quality certificate, and the materials of each steel mill shall be sampled and inspected, and the retest report shall be attached. It shall not be used without inspection, and steel bars shall be marked with pending inspection, inspected, pending treatment, qualified and unqualified.
3. Before steel binding, the technical director shall make disclosure to the team, including binding sequence, specifications, spacing, position and protective layer, lap length and staggered position of joints, hook type and other requirements.
4. Pay attention to meet the requirements of protective layer when concrete is cast. Concrete cushion blocks shall be prepared in advance according to the designed protective layer thickness. The concrete cushion blocks shall be made of ordinary 32.5 cement, and the ratio is 1: 1- 1:2.
When making mortar, the spacing between the pads should be controlled within 65438 0 meters.
5. Steel bars that are not straight in bending should be corrected before use, but preheating method should not be used for correction. Steel bars polluted by oil and sludge must be cleaned before use.
6. Strengthen the quality management of the construction process. In the process of steel binding, in addition to team self-inspection, construction, technical supervision and technical quality should also be checked at any time, and problems should be corrected in time. In order to prevent rework, reinforcement can be accepted by stages according to the working procedure, and the next working procedure shall not be carried out without acceptance of concealed works.
7. In the process of steel binding, if it is found that the steel bar collides with embedded parts or other facilities, it should be studied and handled jointly with relevant personnel, and it is not allowed to bend or cut at will.
8. In order to ensure smooth blanking and vibrating during concrete pouring, attention must be paid to the arrangement of steel bars during binding. Especially in the case of concealed column and concealed beam, the horizontal reinforcement arrangement of concealed beam should reserve blanking gap as far as possible. If it cannot be arranged according to the design requirements, it should be negotiated and unified with the technical department and approved by the design.
9. In order to protect the position of platform reinforcement and embedded pipeline, before pouring platform concrete, build a sidewalk with a horse stool to ensure the accurate position of reinforcement.
10. Allowable deviation of steel binding
(3) concrete engineering quality assurance measures
1. Strictly control the quality of materials. When cement, sand and stone enter the site, they must check the warranty. No.
If the qualified materials refuse to receive the goods, the cement shall be inspected and read the warranty, and then re-inspected after passing the inspection. Strict cement storage system, wet caking or expired cement shall not be used.
2. The concrete mixture ratio is entrusted to a qualified test unit for mixture ratio design and coarse and fine aggregate grading test. Strictly control the mixture ratio during construction, assign special personnel to be responsible for the measurement of ingredients, and strictly implement the measurement responsibility system to prevent concrete cracks during construction.
3. Designate quality inspectors to track the quality and measurement of raw materials in the mixing station, and ask the factory to take adjustment measures in time when problems are found. The slump of concrete should be measured at the pouring site, and it should be stirred again when segregation occurs. According to the regulations, test blocks should be made and sent for inspection in time.
4. Before concrete pouring, the formwork, steel bars, scaffolding, horse stool sidewalk, embedded pipes and embedded parts shall be fully self-inspected, and special inspection shall be carried out. After re-inspection, please ask the owner's representative and supervision for acceptance. After going through the concealment acceptance formalities, concrete pouring will be started, and special personnel will be assigned for maintenance.
5. When concrete pouring is difficult, such as the entrance of the cave, reinforced area, etc., eye-catching signs should be made, management should be strengthened, and key monitoring should be carried out to ensure the quality of concrete pouring.
6. Technical measures to prevent concrete from missing edges and falling corners:
(1) Strengthen the connection at the corner of the formwork, so that the formwork at the corner is closely integrated and seamless. (2) Before pouring concrete, water the formwork to prevent the concrete edge from losing water. (3) Appropriately extend the dismantling time of non-bearing formwork. (4) Pay attention to protect edges and corners when ripping.
(5) Strengthen the protection of finished products after form removal and take corner protection measures.
7. Allowable deviation of concrete
Chapter VI Quality Assurance The original quality assurance of the general agent will be delivered to the dealer together with the club, and the dealer will take good care of it. When selling clubs, the dealer shall give the original "customer copy" of the quality guarantee to the customer for safekeeping. The dealer is responsible for sending the completed "copy of company documents" back to Shenzhen xxx Sports Development Co., Ltd. so that our company can provide quality services in the future. Please refer to the customer's manual for details of the original club quality guarantee of the general agent.
Company statement:
1. Shenzhen xxx Sports Development Co., Ltd. is the only authorized distributor of American kids golf in China.
2. When buying American children's golf clubs, please ask the designated dealer for the original quality guarantee.
3. At the same time, the distributor instructs the customer to fill it out in detail and send it back to Meier Company within 15 days.
Notice to customers:
1. If the following "quality problems" occur within one year from the date of purchase: the club head naturally loosens and falls off, the grip is loose, and the shaft neck is broken, you can enjoy free maintenance service. If it still can't be used normally after two free repairs, you can replace the same model product at the dealer.
2. If your club meets the warranty conditions, please bring your quality guarantee to the dealer to enjoy the warranty service. If the quality guarantee is lost, it will be lost.
3. If the club is damaged due to "quality problems" and needs to be repaired or replaced free of charge, all parts of the club must be taken back completely for the manufacturer's appraisal.
After the warranty period, you will enjoy the right of "special maintenance".
5. Paint painting or natural wear, such as scratches or paint stripping caused by hitting the ball, and natural wear of the grip, are not covered by the warranty.
6. Additional services: expediting, changing the handle, lengthening or shortening the shaft, etc. None of them are free, and they need corresponding costs and freight. (change shaft 150 yuan/piece, change handle 50 yuan/piece, excluding freight).
department of customer service
Telephone message:
Chuan Zhen:
Address:
Article 7 xxxxxxxx (unit or company) of quality guarantee:
As the supplier of your xxxxxxxxx goods, we make the following guarantees to your company:
First, about our business qualification guarantee
We guarantee that the business license and production license provided to your company are true and effective.
Second, ensure our supply.
1. All suppliers have qualified quality inspection reports and relevant product certificates, which are in line with relevant national regulations.
2. After your company confirms the brand of supply in writing, the supplied goods will not be replaced at will.
3. The shelf life of the supplied goods shall not be less than xx days from the date of acceptance and warehousing by your company.
We recognize your goods acceptance system, and strictly abide by your goods acceptance system when accepting supplies.
5. For the unqualified goods, guarantee to make up the qualified goods within the time specified by your company.
6. For the goods that have passed the acceptance, if there are incomplete licenses, inconsistent brands and quality problems before your company puts them into use, guarantee unconditional return and make up the qualified goods within the time specified by your company.
7. If your company is adversely affected by the quality of the goods we supply, we are willing to pay a fine of 1- 10 times the price of the goods, and bear the economic losses and legal responsibilities caused by it.
8. We are willing to take 30% of the payment for the goods supplied as the rolling warranty deposit for monthly settlement, and settle it at the next settlement.
Supplier: xxxxxxxxxx Company
Xxxx，xxxx，xx，xx
Quality Assurance Chapter 8 1. Sign the product quality guarantee and promise that unqualified products will never leave the factory.
2, product quality tracking service within two years, customer service records for 20 years.
3. Due to product quality problems, our company will guarantee, return and replace products to meet customer requirements.
Your trust, our sincerity, quality and quantity, honesty, quality first!
Insulated power cable
Wire and cable quality assurance
Our company guarantees that the quality of products provided to your company is as follows:
1. The wires and cables provided by our company to your company are guaranteed to meet the quality requirements in the following table. 1 logo: including product name, specification/model, manufacturer, production date, batch number, conformity mark, etc. 3c certification: the cable is smooth and flat, the insulation and sheath layers are uniform and undamaged, and the logo printing is clear without eccentricity; No printing errors, scratches, breaks, color errors and other abnormal phenomena such as missing printing or illegible handwriting. The structural dimensions of wires and cables conform to 3c standards and corresponding national standards /part 5. Performance: Combustion grade, withstand voltage test, insulation resistance, spark test, conduction test, insulation adhesion, tensile strength and elongation, surface printing fastness meet 3c standards and corresponding national standards.
Packaging: No packaging damage, complete and correct labeling requirements.
2. When you find the product quality problem, you will give us a written feedback, and we will reply you with the quality improvement measures within 24 hours after receiving the feedback form. When our improvement measures are not verified by your company, your company has the right to reject our products. When you think it is necessary, you can come to our company for on-site inspection or audit of our quality assurance system at any time, and our company will actively cooperate.
3. When all factors related to product quality and stability change, our company will inform your company in writing to strengthen quality control. When your company's design changes, we will immediately communicate with your company's designers and confirm in writing. Otherwise, the consequences will be borne by our company.
4. Our company guarantees that the wires provided meet the gb/t5023-20xx standard. Fire resistance and flame retardancy. Wires and cables are produced according to gb/t 19666-20xx, gb 20286-20xx and ga 306.2-20xx standards.
5. Disputes arising from this letter of guarantee shall be submitted to the people's court where your company is located.
6. This guarantee shall come into effect after being signed or sealed by our company.
name of the company
(Seal)
Entrusted representative:
20xx year month day
Letter of guarantee of quality 9 to: Government Procurement Office of Kunming Municipal Bureau of Organs and Affairs:
In view of the project number of "Kunming Meat and Vegetable Circulation Traceability System Construction" by Kunming Municipal Bureau of Commerce in this public bidding activity: Kuncaigong 20xx1KLOC-0/2065438), our company _ _ _ _ _ _ _ _ _ _ (supplier name) decided to participate in this public bidding activity, and made the following commitments on the services of this bidding project:
1、
2、
3、
4、
(The format is set by the supplier)
Name of supplier: (with official seal of legal person) _ _ _ _ _ _ _ _ _ _ _ _
Legal representative or authorized agent: (signature) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Date: 20xx MM DD YY
Annex XII: Quality Assurance Letter
quality certificate
To: Government Procurement Office of Kunming Municipal Organs Administration Bureau
This book is the proof of the quality assurance provided by our company _ _ _ _ _ _ _ _ _ _ _ We promise to provide the following quality assurance and bear corresponding legal responsibilities:
1. The equipment provided in the computer room is brand-new, in line with relevant national technical standards or industry standards, with complete procedures in relevant domestic departments and the manufacturer's quality guarantee (or certificate);
2. The equipment provided meets the technical requirements specified in the bidding documents and signed contracts;
3. Ensure the satisfaction of all contents in the "Commitment Letter of After-sales Service";
4, each piece of equipment and equipment accessories complete, complete packaging, intact unopened;
5. Ensure that the installation and debugging are carried out in strict accordance with the relevant national standards, ensure that the quality of all bidding products meets the requirements of relevant national laws, regulations and provisions, and the shelf life is implemented in accordance with relevant national regulations.
This guarantee is valid for 30 days from the date of bidding. If we win the bid, it will be valid until the warranty period of the equipment expires.
Name of supplier: (with official seal of legal person) _ _ _ _ _ _ _ _ _ _ _ _
Legal representative or authorized agent: (signature) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Date: 20xx MM DD YY
Quality Warranty 10 Based on the principle of being responsible to residents and society, our company (unit) is responsible for _ _ _ _ _ _ _ _ _ _ _ _ _.
1. conforms to the current residential building design standards.
Two, has passed the city, district (county) quality supervision department acceptance, and a written certificate.
Three, the building has a "new residential delivery permit".
Four, since the date of delivery after the signing of the contract, the company (unit) within two years of normal use of the following engineering quality problems:
1. Leakage of wall, ground and pipeline;
2. Rainwater pipes and sewage pipes are blocked and overflow;
3. The doors and windows are not installed tightly, resulting in warping;
4. The plastering layer of walls and ceilings falls off;
5. The lighting circuit is out of order;
Roofing waterproof warranty for 3 years, other parts and components of the warranty period, agreed by the real estate development enterprises and users themselves.
Due to home use, improper decoration or unauthorized change of structure; The quality problems caused by pipeline alignment are not within the maintenance scope of our company.
5. After the residents move in, our company (unit) will conduct on-the-spot inspection and give a written reply in time, and properly handle the complaints about housing quality (letters and visits).
Six, the foundation and the main structure should be guaranteed within a reasonable service life. The dangerous houses will be returned after being appraised by the relevant professional departments of the city, and the relevant appraisal fees will be borne by the company (unit).
Seven, such as the company (unit) to reply or deal with disputes, all related to the quality of residential projects, according to the "Regulations on the Administration of Construction Market in XX City", to the local construction engineering quality department for coordination; Where the quality of residential supporting facilities is involved, according to the municipal government's "Measures for the Administration of the Construction and Delivery of New Residential Supporting Facilities in XX City", apply to the original issuing residential construction management department for coordination. Residents can also bring a lawsuit directly to the people's court.
Eight, the company (unit) is willing to commit to other content (see the attached page, omitted).
Nine, the letter of guarantee as an annex to the residential sales (placement) contract, as a valid certificate of the contract, has the same legal effect as the contract.
Model essay on quality assurance: quality assurance of construction projects
Employer (Party A): _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Contractor (Party B): _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
According to the Construction Law of People's Republic of China (PRC), Regulations on Quality Management of Construction Projects, Measures for Quality Warranty of Housing Construction Projects, the management provisions of relevant laws, regulations and rules and the agreement of both parties, through consultation, we promise:
First, ensure that the following personnel are in place, and assume relevant safety responsibilities in the construction of this project.
1. Person in charge of the construction site of the construction team: Tel:
2. Construction Team Leader: Tel:
Second, the on-site person in charge of the construction team is responsible for the quality construction of the construction project to ensure the quality of the project, and organize the formulation of quality construction measures according to the characteristics of the project to eliminate the hidden dangers of quality accidents.
Third, the construction team is responsible for the quality of the construction site. Obey the general contractor's quality management of the construction site.
Five, the quality supervision and inspection of quality production supervision institutions in the case of not affecting the normal construction activities of the project, our construction team should cooperate and support.
Six, the project construction process, we will strictly implement the "building engineering construction quality acceptance specification", to ensure qualified.
Seven, we in the process of internal and external wall plastering construction engineering quality accidents, such as our reasons, all shall be borne by us.
Eight, this guarantee is in duplicate, one for the project department and one for the construction team.
Guarantor:
ID number:
Telephone;
20xx year x month x day
;