1. The processing method of jadeite ring surface is to select materials, which have thickness requirements, no cracks, no flowers in color, plant them in water, and then cut them according to the size of the ring surface. When cutting, you should also find the right position of the knife and cut along the color.

2. First draw a rough outline and waistline according to the material, and determine the scope and shape to be polished. Use diamond sand table to polish the torus into a regular body, which makes the follow-up operation more orderly. Grind the sharp corners of the regular body evenly with emery disc, so that the shape of the whole torus can be revealed.

3. You can coat a layer of polishing powder on the surface of jade, and choose the one with smaller particles. After that, the polishing powder on the surface of Yuhuan kept rubbing and then polished properly.

How is the surface of the jade ring polished? What is the fixing for the surface polishing of the jade ring?

First, apply a layer of polishing powder on the surface of Yuhuan, and choose the one with smaller particles. After the surface of the jade ring is polished with polishing powder, the surface of the jade ring is polished with abrasive tools. The common grinding tools include sandpaper and grinding wheel.

The surface polishing of jade ring is divided into five steps, namely polishing powder, rough polishing, fine polishing, cleaning the ring surface, waxing the ring surface and so on. First, apply a layer of paste polishing powder on the surface of Yuhuan and polish it with a hard brush.

Plaster the jade ring, and coat a layer of paste polishing powder on the carved jade surface. The green color is chromium oxide, and the orange color is cerium oxide. Push grinding, grinding the surface with 2000 mesh grinding wheel. Repeat the first two steps, usually twice. Use a brush to coat the surface of jade with diamond powder, and then throw it out with a hard brush.

A layer of polishing powder can be coated on the surface of jadeite, and the polishing powder should be the one with smaller particles. After that, the polishing powder on the surface of Yuhuan kept rubbing and then polished properly.

First, draw a rough outline and waistline according to the material, and determine the scope and shape to be polished. Use diamond sand table to polish the torus into a regular body, which makes the follow-up operation more orderly. Grind the sharp corners of the regular body evenly with emery disc, so that the shape of the whole torus can be revealed.

How jadeite is inlaid, how jadeite is inlaid.

1, nail embedding method. Also known as "bead inlay", it is an extension of accepting metal. At the edge of the metal inlay, shovel out a few small nails with something to strengthen the surface of Yuhuan. Take the ring as an example.

2, design sketch, generally speaking, before the jade inlay, the designer will first conceive and design a sketch. Carve the wax board. The master carves the wax board by hand according to the sketch. Metal stamping is to select some suitable metals, such as K gold and silver, as materials to make various parts.

3. There are generally the following mosaic methods for jadeite: clamping, embedding and embedding. Clamping, that is, turning out the groove on the side of the inlay, then putting the finished jadeite into the groove and pressing it.

4, pointed inlay, using metal claws to buckle the jade on the bracket, the jade covers the least, so that the surrounding light can shine on the jade, showing the peerless elegance of the jade. Pointed mosaic is the most commonly used mosaic method for jadeite.

How to embed the jade ring face in the ring holder

1, pointed inlay method: pointed inlay is the most commonly used method in jewelry inlay technology. The reason is that the pointed inlay is to firmly fix the gem with a long metal claw (column). The biggest advantage is that metal rarely hides gems and can be appreciated from all angles. This mosaic method is suitable for ordinary big gems.

2. Claw setting: Claw setting is to leave small claws on the ring holder, and then use these small claws to tightly fasten the top of the jade, thus fixing our jade. In fact, claw inlay is a common way of jade inlay, because it can show the beauty of jade to the maximum extent.

3. Tip installation. Refers to the small fine teeth welded on the ring holder, which can tightly press the edge of the jade body. Fork inlay is pressed on the top of jade by the inlaid claw, thus fixing the jade.

4. Embedding jade rings usually requires design, plate lifting, film pressing, mold holding, stone setting and other processes; The design is to draw the style in concept, and the lifting plate is a hand-made ring support template.

5. The setting of the ring holder mainly depends on your diamond situation. The inlay methods of the ring holder mainly include: pointed inlay, dense inlay, single diamond inlay, groove inlay and so on.

6. If you remove the jade ring surface from the copper bracket, it is recommended to find a professional. Because there are several claws on the copper holder on the jade ring, you can remove the copper holder by prying the claws with sharp metal.

How to grind the jade ring face?

First, draw a rough outline and waistline according to the material, and determine the scope and shape to be polished. Use diamond sand table to polish the torus into a regular body, which makes the follow-up operation more orderly. Grind the sharp corners of the regular body evenly with emery disc, so that the shape of the whole torus can be revealed.

Waxing is a kind of protection for the surface of the finished jade ring. You can wash it off with warm water and dry it in a ventilated place. This completes the polishing of the jade ring surface.

The surface of the jade ring is polished with tools such as sandpaper, polishing powder and cowhide. The polishing of the jade ring surface usually goes through the processes of paste, rough polishing, fine polishing, cleaning and waxing.

If the wear or scratch is serious, it is suggested to remove the surface of Yuhuan and carry out simple polishing treatment. At this time, polishing should be light, skillful and economical, and the integrity of Yuhuan surface should be preserved to the maximum extent. 2. Polishing and waxing. If the wear is not serious, remove the surface of the ring, simply polish it, and then wax it and wear it.

Plaster the jade ring, and coat a layer of paste polishing powder on the carved jade surface. The green color is chromium oxide, and the orange color is cerium oxide. Push grinding, grinding the surface with 2000 mesh grinding wheel. Repeat the first two steps, usually twice. Use a brush to coat the surface of jade with diamond powder, and then throw it out with a hard brush.

The first step is to polish it with a small oilstone. If the final carving is rough, it should be polished with oilstones of different thicknesses in turn. In the past, there were two grindstones for grinding kitchen knives, thick and thin. Thin slices are called grindstones. Of course, jadeite grinder and oilstone grinder may be different.

How is the jade ring inlaid? How is the jade ring inlaid?

1. The jade ring face and the ring holder are not glued, but embedded and fixed on the ring holder. The common inlay methods of jade ring surface are: cross inlay, inlay, inlay and so on.

2. Primary jadeite can usually be inlaid by means of inlaying, nailing and cross-inlaying. Edge wrapping, also known as edge wrapping, is a process of enclosing the periphery of a gem with a metal edge, which is mostly used for some larger gems, especially jade with a large arch surface.

3. Emerald ring inlay can be set by flanging, full circle inlay and nail inlay. The edge inlay of Yuhuan is generally to weld a thin metal frame or ring fixed on a metal base into a jewel seat, and then put Yuhuan into the seat.

4, nail embedding method. Also known as "bead inlay", it is an extension of accepting metal. At the edge of the metal inlay, shovel out a few small nails with something to strengthen the surface of Yuhuan. Take the ring as an example.