Bracelets can be made of double knots. Fold the thread in half and thread the needle into the bead string. Then put the two ropes on the right through the two knots on the left, move the beads to make a fast knot, and finally move the beads to hide. You can also use three ear knots, first get three ears, then turn the lower two lines over, press the right ear, repeat this step counterclockwise, and then tighten it after leaving a gap.

1, double-line junction

Handstrings can be tied with double knots. First, the thread is folded in half and put into the steel needle, then the beads are put into the folded rope one by one, then the two ropes on the right pass through the two knots on the left, then the beads are moved to the left one by one, and then the knots are tightened and tied into a dead knot. After each knot, pull the rubber band hard to check the tightness. Finally, cut off the extra rope and hide the knot in the beads.

2, three ear knots

Bracelets can be tied with three ear knots. First thread the thread through the upper, middle and lower ears, then turn the lower two threads over and press them on the right ear, then repeat this step counterclockwise, then thread the left ear into the gap left by the lower two threads, and finally tighten them. You can tie the knot in turn according to this method.

Step 3: Diamond knot

A bracelet can be knotted with a diamond knot. First, fold the line in half, then press the left line on the right line, then wrap the line around the right line to leave a circle, then thread the left line on the right line, and then the right line passes through the circle left by the left line from the front, which can be completed or made in turn.