Rusting of automobile side skirts will affect the beauty and value of motor vehicles. 1, if the solid steel rusts, the compressive strength will be greatly reduced, and the defense performance may be reduced in the face of traffic accidents; 2. Side skirts refer to skirts assembled on both sides of the motor vehicle body, which can reduce the air resistance when the motor vehicle is driving at high speed; 3. If the brake disc is seriously corroded, too tenacious corrosion will also accelerate the wear of the car brake pad, so you have to go to the garage to polish the brake disc.
The rust factor is not outside, but inside, the side skirt is not painted; The most suitable method is to fill both skirts with paint in the new car and then put them down. When the paint is dry, pour it again. This solves the problem, and so does the bottom beam. The solution to the serious corrosion of motor vehicle side skirts is as follows: first, slowly grind off the rust with ultra-fine sandpaper dipped in water, wipe it clean, and then apply a layer of paint to ensure that the rust will not increase weight; If it is a new scratch, it can be wiped clean and then painted with a top coat. Most motor vehicles are basically equipped with a small can of original paint. In this way, the solution is not very beautiful, but the smaller position is also shadowless.