1, picture
Enlarge the cutting board to 150%, which is convenient for depicting details.
2. Set the curve as the default shape.
If the lines are too thick, they need to be reset.
1) Draw a line first and outline the shape-? Red color, thickness 1.5 lbs;
2) Right-click the line to set the default shape.
3, with the curve portrait-double click to close.
1) first screen, double-click to close;
Hair, ears, eyebrows, eyes and all other contours are analogized.
2) A small part can be enlarged again, which is convenient for operation.
3) If the painting is accidentally broken or wrong, delete the redrawing.
4) Eyes are difficult to draw. Draw the eyes, and then draw the light beads. You can draw one, copy and paste it. Glasses, frames. Draw the nose and nostrils.
5) Draw the mouth at last. The mouth should be drawn in two parts, and the upper lip and the lower lip are two different closures. Draw a small closure between the upper and lower mouth, which is the tooth.
6) collars and clothes.
4, fill color, no outline, thickness 1 lb.
1) face: hair, black, no outline; Eyebrows, black;
2) Eyes, full of white, with black outline; Eyeballs, on the contrary: full of black, without outline; Beads full of white light have no outline.
3) glasses, black; The temple is thick, weighing 3 kg. You can brush the other side with a format brush. The pleats below, black.
4) The nose and nostrils are black and have no outline.
5) Mouth: the color picker takes the red color of the mouth; The upper and lower lips are on the top floor. The middle is filled with white, which looks like teeth. It should be hidden under your lips and exposed. If the white part is exposed too much, you can edit it: right-click white-edit the vertex.
6) Face, the color picker fills the face with the whitest color, and the outline is black.
7) Ears, with white face and black outline. Draw a little outline detail inside, black.
8) Neck, use the color of the face, right click, and put the neck at the bottom.
10) collar, shirt color, outline is black; Bow tie/tie, gray bow tie; If the suit has stripes, right-click to select-set shape format-pattern filling-diagonal stripe pattern, and the colors are dark or light from the clothes. When the clothes are partially finished, you can brush the collar on the other side with a format brush.
1 1) The shirt part is filled with the color of the shirt and placed on the bottom layer.
Step 5 adjust the details
1) Select all, change the outline of the shape to 1 pound, change the temple to 3 pounds, and use an A-brush.
2) The lens is filled with white and 70% transparent. There is a feeling of light transmission.
3) Clothes, painting clothes, pattern filling-vertical stripes, placed on the bottom layer.
4) Where you need to modify, you can edit the vertex. Right-click-Settings-Vertex Fine-tuning Shape.
6. Take a photo of your ID card
Insert a rectangle, make a photo and copy it to PPT. The size is "35x wide and 53x high".
Fill your mind with imagination and ideas.
You can also combine a part of the avatar with some silhouettes and pictures.
Link:/p/p/30Bed490850
Source: