The side beam frame is suitable for commercial vehicles. The side beam frame is a solid rigid frame formed by riveting or welding two longitudinal beams and several cross beams on both sides. Side beam frame is widely used in commercial vehicles because it is convenient for car body installation and layout assembly, and is conducive to the modification of modified cars and the development of various models.

Side beam frame is suitable for commercial vehicles;

1. The structure allows a large gap between wheels, which is convenient for installing independent suspension, thus improving the off-road performance of the car; Compared with freight cars of the same tonnage, it has the advantages of light frame, small vehicle weight, low center of mass and good driving stability. The longitudinal beam of the side frame is generally made of low alloy steel plate, which is generally 16Mn. Its cross-sectional shape includes groove cross-section, box cross-section, sawtooth cross-section and I-section.

2. The side beam frame is a solid rigid frame formed by riveting or welding two longitudinal beams and several cross beams on both sides;

3. The cross beam of the side beam frame is not only used to ensure the torsional rigidity of the frame and bear the longitudinal load, but also used to support the key parts of the car. Generally, there are about 5 ~ 8 beams on the truck, which are respectively arranged at the front and rear fulcrums where the radiator, engine, cab, middle bracket of transmission shaft, spare tire rack and leaf spring are installed.