Blanking, punching, forming, stretching, trimming, fine punching, shaping, riveting and extruding parts can be made by die stamping. , widely used in various fields. Such as switch sockets, cups, cupboards, dishes, computer cases and so on.

The design principle of punching machine is to convert circular motion into linear motion, and the flywheel is driven by the main motor, and the gear, crankshaft (or eccentric gear) and connecting rod are driven by the clutch to realize the linear motion of the slider. The motion from the main motor to the connecting rod is circular.

Extended data

Daily maintenance items of punch press:

1. Test and adjustment of grease oil quantity and pressure detection function.

2. The filter of the air system, the regulating valve of the oil feeder and other functions, as well as the water impurity test and necessary adjustment.

3. Check the set value of the air pressure switch, and test and adjust the pressure detection function.

4. Check the set value of the module height indicator switch, and check and adjust the measured value.

5. Check and adjust the looseness, abnormality and chain tension of sprocket, chain, transmission shaft, worm wheel and other parts of high beam equipment.

reference data

Baidu encyclopedia-punch in