First, bring up the soft blue and yellow of the photo-a simple method.
1, open the original material, press Ctrl+J to copy the background layer, click the channel panel, and select the blue channel, image >; Application of image and layer as background, mixed positive superposition, opacity of 50%, anti-tick,
2. Go back to the Layers panel and create a curve adjustment layer. The blue channel is 44 182 and the red channel is 89 108.
3. Create a new layer and fill it with black. The blending mode of the layer is positive overlay and the opacity is 60%. Select the middle part of the selection of the Elliptical Marquee Tool, and press Ctrl+Alt+D to feather. The value is 70. Then press Delete twice to delete, and then type the text to complete the final effect.
Second, bring up beautiful red and yellow photos.
1. Open the original material, press Ctrl+J to copy the background layer, press Ctrl+Shift+U to remove the color, and execute: filter >;; Fuzzy >; Gaussian blur, value 4, layer blending mode is color filtering, and layer opacity is changed to 27%.
2. Create a new layer and press Ctrl+Alt+Shift+E to stamp the layer. The layer blending mode is color. 3. Create a gradient map adjustment layer, purple-orange, Alt+Ctrl+G plus clipping mask.
4. Create a brightness/contrast adjustment layer, -5, -2 1.
5. Create an intelligent sharpening adjustment layer and set it as the default value, with a value of 46 and a radius of 0.8, which is Gaussian blur.
6. Create a gradient adjustment layer, 8,1.00,255.
7. Create optional color adjustment layers: red:+17, -8,+16,0, yellow:-54,0,+10,+18, and white:-5,0,0.
Third, bring up photos of nostalgic scenery,
1. Open the original image and copy one layer.
2. Curve adjustment, RGB value:109,99.
3. Tone saturation, numerical value: 0, -39, 0
4. Color balance, numerical value: 0,0, -34
5. Optional color, neutral color: 0,0,-20,0
6. Create a new layer, fill it with d7b26c, overlay the layer mode, and the opacity is 56%.
7. Pull the cloud material into the picture and put it on the original picture. The layer mode is soft. Erase the part except the sky and stamp the layer (Ctrl+Alt+Shift+E).
8. Optional colors: black: 0,0,-14, -5.
9. Create a new layer and fill it with 0d 1d50. Exclude layer mode, copy a layer and fill it with 52%.
10, curve adjustment, value RGB: 128, 155.
1 1, color balance, values: +24, +7, -64, 70% filling.
12, color scale, value: 29,1.00,227, filling 58%.
13, optional colors, neutral colors:+16,+12,-1 1, +5.
14. Stamping layer (Ctrl+Alt+Shift+E), with balanced color, values: +24, +7, -64, and 38% filling.
15, with layer (Ctrl+Alt+Shift+E), opacity 46%, filling 48%,
16, Ctrl+E merge the visible layers and sharpen them.
Fourth, young people treat characters with delicate skin.
1. Copy the background layer. Filter-Blur-Gaussian Blur with radius set to 10.
2. Set the blending mode of the layer to Color. Double-click the name to the right of the layer to open the blending options. In advanced mixing, the advanced channels of R and G are cancelled,
3. Balance the color image with curves and decide according to the picture.
4. Create a new layer, select the repair brush (J), and select "Sample all layers". Remove large freckles or spots by imitation.
5.ctrl+shift+alt+E, poke all layers and tick off the skin. You can choose the method that suits you. Personally, I prefer pen tools. Of course, you can also use the polygonal lasso tool. It should be noted that you have to deal with the skin, so you should remove your eyes, eyebrows, lips and nostrils. Reverse (ctrl+shift+i) to delete the redundant parts except the skin.
6. Filter-Blur-Gaussian Blur with a radius of 20. Set the transparency of the layer to 75%
7.CTRL+J, copy layer 3, filter-other-Gao Fancha reservation, radius 4, mixed mode "linear light", opacity 40%.
Fifth, the "magic" poster,
1. Open the original image and copy the blue channel with the largest contrast.
2. Then further increase the contrast with the color scale, so that only the stone has layers.
3. Copy the adjusted blue channel into the layer and add the desired color. I use dark orange.
4. Copy the red channel of the base map to the layer, remove the sky and stones with the mask, only keep the grass, and add color to it with the gradient map.
5. Open the material lightning ball and copy the red channel with the biggest contrast with the file just now.
6. Choose the layer blending mode as superposition, adjust the position and size to make it a light source, remove some unnecessary things (decide by yourself), and then use the radial radiation blur filter to form the emitted light beam.
7. Go to the channel to copy the red channel of the base map, strengthen the contrast and make the highlight part of the grass more obvious. Then select the highlight and paste it into the layer, fill it with white, and the layer mode is overlay. Then use a mask to remove the white part of the sky, leaving only the grass part, so that the grass will have a sense of light irradiated by strong light.
8. Select the mask of layer 1 and then reverse it to get the selection of the sky, add curves and hue/saturation adjustment layers, and adjust your favorite color and purity according to your personal preferences.
9. Finally, add some poster elements to make the fake poster look real. In the use of color, I try to choose gold to decorate the color of the stone, so that the colors echo each other.
Six, the beach,
1. Open the original image, create a new layer (Ctrl+Shift+Alt+N), and then stamp the visible layer (Ctrl+Alt+Shift+E).
2. Enter the channel, copy the green channel with strong contrast, and then increase the contrast to make one white and one black, or use the brush (overlay mode) Ctrl+ green channel to copy the selected area.
3. Drag the sky material to create a mask, and then erase the character.
4. Create a layer and soft light mode to make the sky look better.
5. Make a reflection of the water surface, flip it vertically with Ctrl+T, create a mask, and draw the desired effect with a brush. The effect of positive overlay mode is better, which varies from picture to picture.
6. Color matching, according to personal habits, optional colors are very easy to use.
7.Shift+Ctrl+Alt+E, poke the visible layer, overlay the positive film of the layer mode, and then darken the four corners with a mask, mainly to darken the water surface and make the picture more balanced.
8. Filter-Noise-Add noise, quantity 3, Gaussian distribution and monochrome, so that the granularity of characters and the sky is consistent.
9, finally make up the sky.
Seven, the effect of hand-drawn photos in PS,
1. Open the original file, adjust the film by color adjustment according to your own feelings, and then grind the skin, and the grinding value should not be too large (neat image plug-in)
2. Create a new layer, the color is FEE7D6 (set according to the skin color of the characters in the film), the layer mode is superimposed by 25%, and the skin is lightly painted on the face and neck with a brush of 20%.
3. Sketch the five senses, cut out the mouth, feather and copy (Ctrl+J), and apply the lip with a smear tool to make the lip skin soft and delicate (not too thick).
4. Create a new layer, color the lips and face, the color is FDC 1D6, the layer mode is color, and apply it to the lips and face with a brush.
5. Draw the highlight part of the lip with the dodge tool, with the range of highlight and exposure of 25%. Use a deepening tool with a medium range and 20% exposure to enhance the contrast of the lips.
6. Create a new layer, the color is 8E 1A25, the pixel of the brush is 3, draw the line inside, and then draw the line outside the lips with the pixel of 2 (highlight with mask).
7. Draw a circle to feather the nose, copy it, use the smudge tool to slightly refine the periphery of the nose, then use the fade tool to highlight the area with 20% exposure, strengthen the highlight part of the lower nose, and then draw the outline of the nose with a color of 422B2D and a 2-pixel brush (if the lines are shallow, use the deepen tool to make up).
8. Feathering —— Duplicate the eyebrow circle, gently thin the skin around the eyebrow with a smudge tool, then enhance the highlight of the lower orbit with a lightening tool with a highlight range and an exposure of 65,438+05%, and deepen the lines around the eye with a deepening tool in the middle range.
9. Use the smear tool to smear and refine the eyeball to make it look softer. Use the deepening tool to deepen the black eyeball. Use the thinning tool to highlight the range, and expose 20% to enhance the highlighted part of the eyeball to make it look brighter.
10. Color 080 10 1, brush pixel 3, and draw the eyelash part. (The depth of the line color can be compensated by deepening and lightening tools. ) Eyelash line can also be detected by some methods such as path.
1 1. Use the smudging tool to smear the eyebrow shape beautifully, with the eyebrow color slightly darker, then fade it down along the smearing place, and then draw an eyebrow line at the front end of the eyebrow with two pixels of the brush to make the eyebrow more layered.
12. Apply a brush suitable for the hair (set the brush shape according to the texture of the hair), and apply it along the texture of the hair during the application process, not too hard, but evenly.
13. Connect the ends of the hair with a common brush (be careful when painting your hair).
14. Draw the texture of the hair and create a new layer. The layer mode is overlay, the pencil pixel is 1 (the value depends on the size of the person's picture), and the color is DFDFDF. Draw smooth lines along the texture of the hair.
15. Brush tools can be selected for ponytail parts, and some crossed brushes are traced along the texture. The color layer mode is the same as above.
16. Create a new layer. In normal mode, select the brush tool, the pixel is 1, the opacity is 60%, the flow rate is 80%, the color is white, and the dynamic hair on the forehead is drawn.
17. Soften clothes and necklaces with the smudge tool, and then choose the lightening tool, with the highlight and exposure range of 20%, to strengthen the highlight part of clothes and necklaces.
18. Synthesis: Sharpen the whole picture with a sharpening value of 8. Use the brightening tool to slightly treat the highlights and correct the overall color (you can add some background lights to highlight the theme).
Eight, the late makeup strategy,
1. Open the file and copy a layer.
2. Select the copied layer and press ctrl+t to change the face shape of the character to make it more slender.
3. After pressing the merged layer (ctrl+e), use the clipping tool to re-compose and cut off the redundant parts.
4. Image-Adjustment-Optional colors: red -70, -20, -20, -50. Yellow -40, -20, -30 and -80. White-0,0,0, -50. Intermediate colors -0, -5, -5,-.
5. Adjust the overall color according to the curve (ctrl+m), RGB full channel-output 2 14, input 174, blue channel-output 13 1, input 124,
6. Image-Adjustment-Color Balance (ctrl+b), Shadow-10/0,0,+15. Highlight-10/0,0, +2.
7. Cover the skin around the mouth evenly with a punching tool.
8. Draw a circle around the eye bags and the dark part of the face with a pen, feather 60, and brighten the selected area with curves to dilute the eye bags and reduce the expression of facial muscles that are not relaxed.
9. Continue to feather the selection 60, brighten the curve to make the face full, output 146, and input 1 13.
10. Circle highlights and feathering 60.
1 1. Brighten the curve to make the face full, output 138, and input 1 18.
12. Trim eyebrows, circle the top of eyebrows with lasso tool, feather 5, copy one layer, and move the copied layer down to achieve the effect of trimming eyebrows. Trim eyebrows with a stamp. Be very careful with this.
13. Start adjusting your eyes, circle your eyes and copy one layer.
14. Circle the area to be used as eye shadow with a pen. After copying a layer, deepen the curve and adjust the color.
15. Then unify the eye shadow color, and the color balance (middle tone):+50,0,0. (Shadow):+20,0,0,
16. Detail color adjustment, upper eyelid 1/3, hue saturation: 0, -40, 0.
17. Circle the details, which are at the root of upper eyelid eyelashes and the anterior angle of lower eyelid 1/3. Press the DELETE key to delete the selection, so it is highlighted.
18. Remove excess eye shadow and feathers 40.
19. Circle the details, from the inner corner of the eye to the upper eyelid 1/2, and press the DELETE key to delete the selection, so that the highlights are exposed.
20. Circle the eyeball, copy a layer, feather 1, desaturate the white part of the eye, and remove the noise. Tone saturation is 0, -50, 0.
2 1. Adjust white details, adjust curves and increase brightness.
22. After a layer of eyeball is copied, the curve brightens, and the upper part of the left eye is brushed with a brush to reveal some shadows.
23. Delete the pupil part
24. Adjust the eye color with curve to make it consistent.
25. Add eye highlights
26. Circle the lip, feather 2, curve adjust the lip highlight, and adjust the lip color.
27. Adjust the highlights of the bridge of the nose and the highlights of the eye shadow.
28. The overall color matching uses optional colors, and the intermediate colors are-0,0,-2,2.
29. Fine-tune with color balance (highlight): 0, 2, -2.
30. Liquefied smooth hair, with lens halo, brightness 182, focusing 35mm.
3 1. Finally, add a flash brush in the appropriate place.
Nine, 1. Draw the outline of a wing on the back with a pen.
2. Convert the current working path to the path 1, and double-click the working path.
3. Convert the path into a selection (Alt+ ENTER), copy one layer, feather 3 pixels,
4. Fill it with white, choose the appropriate strength, and use the daubing tool to daub the appropriate edge.
5. Copy the layer and fill it with different colors to make the layer 1 different. Adjust transparency and layer properties.
6. Make the second wing according to the previous method and adjust the appropriate transparency, which can be adjusted by adjusting the layer and mask in black and white gradient.
7. Create a new layer, draw a circular selection, draw a circle in the selection, and adjust the appropriate transparency.
8. Copy the background layer and paste it into the newly created Alpha channel, fill it with black except the upper left corner, use filter-blur-radial blur: No.90, blur method: zoom,
9. Select the Alpha channel (hold down Ctrl on the channel), create a new layer in the layer area and fill it with light yellow.
10. Use a pen to generate the path of the light beam, convert the path into a selection, and fill it with yellow and white gradients.
1 1. Adjust the transparency and smooth the bottom with an eraser to make the light natural.
12. Draw a light path on the character with a pen, convert the path into a selection, draw a stroke on the edge of the selection, adjust the transparency, and combine the eraser and smudge tool to achieve better results. Would it be better to spend more halo?
X. 1. Find a wrinkled background, drag the photo to the background layer, resize it, and crop it to match the background border.
2. Adjustment-hue saturation, full picture: saturation -35, lightness+10,
3. Adjust the layer to soft light mode to show the effect of old photos.
4. Tone saturation, full picture: 0, -80, 0
5. Copy the layer, hue saturation-coloring: 340, 24, 0.
6. Create a new layer, put it on the top and fill it with black.
7. filtering-noise-adding noise increases the sense of obsolescence, the number is 25%, Gaussian distribution,
8. The mixing mode is positive superposition,
9. Image-adjustment-inversion,
10. Remove the noise in the border, use the rectangle selection tool to select the inside of the border, and use the DEL key to remove the noise in the outline.
1 1. Erase the noise around the characters with the eraser tool?
Eleven, 1. Copy layer, turn channel, copy red channel, curve adjust red channel copy, input 100, output 3,
2. Fill people and flowers with white with a brush or selection tool.
3. Hold down the Ctrl key and click the red copy to make it a selection, delete the red copy and return to the Layers panel.
4.Ctrl+C copy, Ctrl+V paste, and figure and flower matting are completed.
5. Method 1: Create a new filled layer, R=255, G= 128, B= 173, and change the layer to color mode.
6. Method 2: Saturation coloring method: create a new hue saturation adjustment layer, check the front of coloring, hue =345, saturation =60, lightness =0, and create a new curve adjustment layer, 237, 255; 188, 130
7. Method 3: Create a new color balance layer, with intermediate tones-color scale:+100, -54, -20/+ 100, -35, +43.
Shadow-color scale:+1 1, -7, +3. Create a new optional color adjustment layer, red: 0, +2 1, -23, -5. Magenta:-100, -45, -32, -66.
8. Use gradient mapping, create a new gradient mapping 1, and change the layer to color?
Twelve, 1. Open the original image, copy the layer, fill it with pure black, and overlay the pattern.
2. Create a new hue saturation layer: saturation -85.
3. Create a new brightness contrast layer: contrast+10,
4. Create a new optional color, red: 0, +30, 0,+100. Yellow: 0,-15,-100, 0. Intermediate colors: 0,0,0, +5.
5. Stamping, filter-rendering-lighting effect: point light source, intensity 2 1, focus 24, gloss 0, material 69, exposure 0, environment 8,
6. Stamp and decorate with words
Thirteen, 1. Copy layer, filter-blur-radial blur: quantity 7 1, blur mode-zoom, quality-good,
2. Establish a template, clean the car, and then wipe the dynamic of the wheel with daub.
3. Color scale-optional color. Add materials, render the overall atmosphere, and adjust the details with dimming. Within the main diameter of 5, the hardness is the smallest?
Fourteen 1. Adjust brightness, contrast, etc. Lay the foundation for subsequent adjustment.
2. Add the sky material, which is simple and transparent, and make the sky blend into the layer.
3. Create a new adjustment layer with optional colors-intermediate colors: +20, +6, +7, -4, absolute and slightly uniform seawater color.
4. The color is filled with khaki, the opacity is 54%, the color is filled with navy blue, the opacity is 6 1%, the opacity is filled with deep purple, and the opacity is 76%.
5. Carefully adjust the selection method of highlights and midtones and the mask obtained. The selection method of highlights: calculation-source 1: layer merging layer, gray channel, source 2: layer merging layer, gray channel, positive superposition mixing, opacity 100%.
6. Selection method of midtones: source 1: merged layer, gray channel, source 2: merged layer, gray channel, positive overlay and mixing, opacity 100%.
7. Mask obtained in 7. The RGB channels are adjusted by curves and highlights: the black line is in the middle line on the left of the penultimate grid, the blue line is lowered a little, and the middle tone is adjusted upwards.
8. Masking of reflected light, lasso selection in selected areas, feathering, overall brightening,
9. The ship's sundries reduce the saturation, and the saturation is -36.
10. overall sharpening?
Fifteen, 1. Open the picture copy layer, Ctrl+Alt+~, get the selection, feather 3-5. Protrusion curve, about18,0.
2. Adjust the color scale: 25, 1, 20,245. Cover up the subject and details of the characters.
3. Stamp and polish the characters to enhance brightness and sharpen the edges.
4. Use midtones to balance the color of the imprint layer:-12,-10,-13. Highlights:+8,0,-19.
5. Poke the layer and enter the laboratory mode.
6. Create a new layer, Shift+Ctrl+N, soft light mode, transparency 30-40%.
7. Apply the image to the newly created layer, layer: merged layer, soft light mode, transparency 100%,
8. Adjust the layer and the curve of the lightness channel, 5, 0.
9. Adjust the hue saturation of image LAB color. The whole image is 0,+10/0,0. Yellow: 0, +35, 0. Green: 0,+15, 0. Red: 0, -20, 0. Blue:+10.
10. Input color scale: 20,1.20,245. Adjust the brightness channel, pull out the main body of the character with a circular gradient at the mask, and then wipe off the details with a brush.
1 1. stamp, return RGB color, select color option for the image, red channel: 0, 0, -30, erase the petals on the mask,
12. Stamp, create a new blank layer, and use a white brush to increase the sprinkling effect and pen pressure. Hardness 100%, spacing +54%?
Sixteen, 1. Copy layer, soft light mode, soft light optimization layer.
2. The hue of Ctrl+U is saturated, and the color of leaves is absorbed by straws to change the hue, thus achieving the purpose of changing seasons. We need the feeling of winter, find the hue of leaves and adjust the brightness to the brightest.
3. Pay attention to the details of the Tolerance slider under Brightness. You can select a selection to reduce saturation, or use hue to increase brightness. Here, you use a color range, turn off the copy layer, and use a color range of the background layer.
4. After selecting the selection area, return to the copied layer and feather it so that the saturation of the selected part is 0.
The feeling of snow is "Gao Fancha". If you select all scenes except people, you can reverse the selection of people, use color range or hue saturation, and finally add contrast to wipe off clothes.
6. The snow is a little hard. Make a fuzzy overlay on the snow, select the contrast of the duplicate layer and change it to overlay mode. The replication layer should be below the contrast layer.
7. Add a contrast to the whole, erase the perspective relationship with a big brush, exclude the characters, and give details to the snow scene.
17. 1. Copy the layer, adjust the brightness contrast, and merge down.
2. Enter the laboratory mode, select the application image in the image and calculate it.
3. Change the layer mode to color and stamp the layer.
4. Enter the RGB channel, fill the blue channel with black, extract the green channel selection, and fill the selection with white.
5. Hue saturation, red: +20,+1, 0. Cyan: -7,+26,0. Other data remains the same, so change the layer mode to color.
6. Enter the RGB channel, select the green channel selection area, carry out reverse selection, adjust the color balance in the layer, and select the middle tone, with values of-10, -6,+16. Shadow: +4, +5, -2. Highlights:-19, -26.
7. Poke the layer, enter the RGB channel, select the red channel selection, copy, return to the RGB mode and paste, change the layer mode to color, and choose to adjust the curve in the layer. Red channel: 173, 193. Red channel: 58, 56. Green channel:180,201. Green channel: 53, 58. Blue channel: 55, 62.
8. Change the layer mode to color and copy the layer. After copying the layer, change the layer mode to 20% brightness and transparency.
9. Select hue saturation in the adjustment layer, cyan: +5, -49, -2.
10. Adjust the color balance in the adjustment layer, and adjust it to -6, 0, +3 in the middle. The shadow of -7, +3,-1
1 1. Color balance, shadows: +4, +5, -2. Shadow: +4, +5, -2. Highlights:-19, -26, -40.
12. Add lightning effect. ?
18. 1. Create a hue saturation adjustment layer with a saturation of -49.
2. Create an optional color layer, red:-49,0,+7,41. Yellow: 0,0,0, -23.
3. Create a hue/saturation layer with brightness of -49.
4. Optional colors. Yellow: 0,0,0, -26. White: 0,0,+46,0. Intermediate colors: 0,0,-6,0.
5. Optional colors. Red: 0,0,0, -48. Black: 0,0, -47, +5. Transparency is reduced to 37%.
6. Stamping, noise reduction, sharpening, smearing and simple tools to repair the light spot near the knee,
7. Add dark corners, make a heart-shaped choice, and brighten feathers and curves. ?
19. 1. Copy a layer and convert it into a smart filter, so that the effect of the filter can be adjusted.
2. Filter-rendering-lighting effect, full light source, negative 17, stripe -25, plastic effect 100, underexposure 32, negative 28,
3. Create a new optional color adjustment layer, red:-100,-3,03,0. Yellow: -59,-6,23,+1. Green: +9, +5,-100, +27. Cyan White:+1, -40, -73,-10. Intermediate colors:+16,-18,-18, -3. Black: 0,0,0, +28?
Twenty, 1. Adjust the color cast slightly, bring up the approximate tone, and establish the tone adjustment layer. The full channel of the tone is 0.1.35,255. Color coded red channel: 0, 0.85, 255. Color scale green channel: 0, 1,10,255 Color scale: 0,0.95,255.
2. Establish hue/saturation adjustment layer to reduce the saturation of the original image, and the saturation of the whole image is -30.
3. Create a photo filter adjustment layer. The first step, cyan has come out. In this step, dark yellow with a concentration of 25% is added, and the mode is "soft light". In "soft light" mode, the original dark place will be darker. Select the channel panel, hold down ctrl and click the red channel. The selected area will return to the mask of the photo filter and be filled with black.
4. Create an optional color adjustment layer, red: 100, -33, 100, -40. Yellow: 0,0,-40,0. White:+15,0,+20,20
5. Brighten the window, set a tone/saturation adjustment layer, check "Coloring" and set the mode to "Soft Light". After setting, erase the part outside the window in the mask. Tone 260, saturation 25, lightness +75
6. Set the color balance adjustment layer to distinguish the characters from the surrounding environment. After setting it up, wipe it with a big black soft-corner brush in the mask centered on people. Color scale +20, +20, +40, choose the middle tone.
7. Create a tone adjustment layer. First, roughly separate the dark part from the bright part. Use the black and white gradient tool to pull in the mask, and gradient black and white from the upper right corner to the lower left corner until it is suitable. All channels 0, 0.80, 255
8. Add light, use "filter-rendering-lighting effect", create a new layer, stamp it, and turn on the lighting effect filter, just to feel the sunlight coming down. The upper left corner is a little dark. Add a mask to erase it. Spotlight, intensity: 28, focus 52, gloss-100, material 100, exposure 17, environment 32.
9. Create a new seal, enhance the contrast between light and shade, establish a color level adjustment layer, and pull it into the mask with the black and white gradient tool. The black-and-white gradient changes from the upper left corner to the lower right corner, and some light in the upper right corner is blocked. Erase the mask with a white brush, and then erase the characters from the mask. Color scale full channel. Color scale full channel: 0, 0.80, 255
10. Sharpen, slightly grind the skin, add words, and finish.