Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and medical aesthetics - How to repair the deformation of the front fender
How to repair the deformation of the front fender
The deformation of the plastic fender in front of the car should be solved by painting after the sheet metal repair in the repair shop, generally around 400 yuan. The front fender is either repaired with a metal plate or can only be replaced. If it's a rear fender, cut it. Generally speaking, what is not serious is sheet metal repair. The method of repairing the deformation of the front fender is as follows: 1. Remove the front door, fender, front bumper and other covering parts, carefully check the damaged parts and positions, and record them on the damage evaluation form one by one; 2. Dismantling the indoor seat and carpet, it is found that the steel plate on the inner side of the threshold is seriously deformed, and the car bottom has caused serious fold deformation; The front windshield of this car is not damaged, but the dashboard has obvious dislocation marks. In order to prevent omission, the damage scope was thoroughly detected, and the instrument panel and accessories were disassembled, and it was found that the instrument panel beam had been deformed. Lift the vehicle on the lifting frame and measure the chassis to ensure that the data on the bottom of the vehicle body is normal and there is no "banana-like" deformation of the whole vehicle body.