Construction Contract of Building Project (Chapter 1) Party A: Party B: Based on the principle of equality and mutual benefit, according to the Labor Law, the Civil Code and other relevant national laws and regulations, the following agreement is reached:
1. Project contracting content: embedded construction of air conditioning and heating pipes.
Second, the project site selection:
Three. Safety: During the construction period, Party B shall be responsible for all safety accidents.
Four. Engineering technical requirements: Party B shall carry out the construction according to the design drawings, current construction specifications and the technical requirements of the company (Party A), make safety construction disclosure and organize the construction.
5. Party B shall seriously carry out the construction according to the standards, specifications and requirements. If the quality of the project fails to meet the agreed standards, Party A shall require Party B to re-construct. If the agreed standards cannot be reached due to Party B's reasons, Party B shall bear the cost of re-construction, and the construction period will not be postponed.
6. Calculation of engineering quantity: based on the excavation engineering quantity of construction drawings. In case of any increase or decrease of engineering quantity during construction, the contract price shall be adjusted and a supplementary agreement shall be signed after confirmation by the company.
Seven. Price: This quantity is the total price of RMB.
Eight. When the construction is affected by local factors, Party A shall be responsible for coordination.
9. Civilized construction: Party B shall be responsible for the consequences if it meets the requirements and standards of _ _ _ _ _ _ civilized construction of city appearance and violates relevant regulations.
X. duration: days. ten
1. Payment method: after all the project works are completed and accepted, all the project funds will be paid in one lump sum. ten
Two. Settlement method: Party B shall settle with Party A in the form of mechanical fuel fee and workers' wages. ten
3. This contract is made in sextuplicate, with Party A holding four copies and Party B holding two copies. This contract shall come into effect as of the date of signature by both parties, and shall automatically become invalid after the payment of the project funds is completed. (subject to the bill)
Party A (official seal): _ _ _ _ _ _
Legal representative (signature): _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Party B (official seal): _ _ _ _ _ _
Legal representative (signature): _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Construction Contract of Building Project (Part II) Owner (full name):
Contractor (full name):
In accordance with the Contract Law of People's Republic of China (PRC), the Construction Law of People's Republic of China (PRC) and other relevant laws and administrative regulations, and following the principles of equality, voluntariness, fairness and good faith, both parties reach an agreement on the construction of this construction project and conclude this contract.
I. Overview of the Project
Project name: the first bid section of mine construction project. Project location: project content: office and living facilities, construction area: m2, (the specific value is subject to the approved preliminary design), building height m or span m, structure type: frame shear, reinforced concrete, floor and other outdoor facilities. Group projects shall be accompanied by a list of projects undertaken by the contractor (attachment 1).
Project approval number: source of funds:
Second, the scope of project contracting
Scope: civil engineering and infrastructure installation within the construction drawing of the first bid section.
Third, the term of the contract.
Commencement date: 20xx 65438+ 10 month
Completion date: 20xx 65438 10 month
The total calendar days of the contract period is 730 days.
Fourth, quality standards.
Engineering quality standard: qualified
Verb (abbreviation of verb) contract price
Amount (in words): yuan (RMB) × ten thousand yuan.
An intransitive verb constitutes a contract document.
The documents constituting this contract include:
1. Agreement in this contract
2, the bid-winning notice
3, the book of tender and its attachments
4. Special terms and conditions of this contract
5. General terms and conditions of this contract
6. Standards, specifications and related technical documents
7. Cartography
8, bill of quantities
9, project quotation or budget
The agreement or document on project negotiation and change between the two parties shall be regarded as an integral part of this contract.
Seven. The meanings of related words in this agreement are the same as those given to them in the General Conditions in Part II of this contract.
Eight, the contractor promises to the employer to carry out construction and completion in accordance with the provisions of the contract, and undertake the project quality warranty responsibility within the quality warranty period.
Nine, the employer promises to the contractor to pay the contract price and other payments in accordance with the time limit and manner agreed in the contract.
X. Entry into force of the contract
Date of conclusion of the contract: August 20xx 17.
Place of signing the contract: This contract shall come into effect as of the date when both parties agree to sign and seal it.
Party A: Party B:
(Seal) (Seal)
Legal representative:
Authorized Agent: (signature) Authorized Agent: (signature)
Company address: Company address:
Tel: Tel:
Bank of deposit: Bank of deposit:
Bank account number: Bank account number:
Contract signing time:
The Employer (hereinafter referred to as Party A) of the construction contract of the building project (Part III); Address; Legal representative; Contact information:
Contractor (hereinafter referred to as Party B):
Address:
Legal Representative: Contact person:
According to the Contract Law of People's Republic of China (PRC) and the Construction Law of People's Republic of China (PRC), Party A and Party B voluntarily reach the following agreement through friendly negotiation.
Article 1 General situation of the project
1, project name:
2. Project address:
3. Building area:
4. Structure type:
Article 2 Project Content and Contract Scope
1. Party B is responsible for the general contracting of the civil works of this project, and the contracting scope includes: foundation, main body and decoration works.
2. Including the increase or decrease of projects caused by design changes within the contracted scope of Party B. ..
3. Party A specifies the contents of the subcontracted project.
Article 3 the contract time limit for a project
1. Planned commencement date: _ _ _ _ _ _ _ _ _ _ _ _ _ _. Planned completion date: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _. That is, the total days of the construction period: XXX.
Article 4 Quality and Inspection Standards
1. project quality: the foundation, main body acceptance and completion acceptance of the project shall be qualified by the quality supervision department.
2. The engineering quality problems caused by Party B's own negligence must be repaired. Otherwise, Party A has the right to require Party B to pay% of the total contract price as penalty.
Article 5 Project Settlement of Contract Price
1. Contract price: tentative 10000 yuan. The settlement should be based on the actual completed quantities.
2. Project settlement: Within the day after the completion of the project, Party A shall pay% of the total project settlement price to Party B, and% of the total project settlement price shall be used as the quality guarantee fund.
3. Payment of quality warranty: After the project warranty expires and Party A has no objection to the project quality inspection, both parties shall settle the warranty and pay the remaining warranty to Party B in one lump sum.
4. In the process of settlement audit, Party A and Party B shall actively cooperate with the audit, and complete the settlement audit of this project within months from the date when both parties confirm that the completion settlement data is true and complete.
Article 6 Material price adjustment and material procurement
1. If Party A adjusts the main materials, only the material price difference will be adjusted.
2. Material procurement: Party B must purchase according to Party A's requirements and send samples and prices to Party A's representative for approval one day before purchasing.
Article 7 Completion acceptance
1. Agreement for the Contractor to provide as-built drawings:.
2. The scope and completion time of the intermediate project:
3. The Employer shall organize relevant units to conduct acceptance within one day after receiving the completion acceptance report, and give approval or propose amendments within one day after acceptance. The contractor shall make modifications as required, and bear the modification expenses caused by its own reasons. If the Employer fails to organize the acceptance within one day after receiving the completion acceptance report issued by the contractor, or fails to put forward any modification opinions within one day after acceptance, it shall be deemed that the completion acceptance report has been approved.
Article 8 Project Quality Warranty
1. Scope and content of project quality warranty: During the quality warranty period, Party B shall undertake the project quality warranty responsibility according to relevant laws and the scope agreed in this contract.
2. The quality warranty period is: years.
3. Maintenance within the warranty period: general maintenance: Party B will arrive within hours after receiving the notice; Party B shall arrive at the site for emergency maintenance within hours after receiving the notice. If Party B fails to repair in time and thoroughly, Party A will find someone to repair it, and the maintenance cost will be deducted from Party B's warranty fund.
Article 9 Rights and obligations of both parties
1. The rights of Party A mainly include:
(1) Check the quality of the project progress.
(2) After the project is completed, the project shall be accepted.
(3) If the project quality is not in conformity with the agreement due to Party B, Party A has the right to require Party B to repair it free of charge within a reasonable period of time.
2. Party A's obligations mainly include:
(1) Assist Party B to successfully perform the construction project contract. Party A shall provide funds, venues and related materials in accordance with the provisions of the contract.
(2) Pay the price and other obligations during the construction of the building project.
3. Party B's rights mainly include:
(1) Strictly follow the construction contract and design documents.
(2) Accept the necessary supervision of Party A. ..
(3) Complete and deliver the qualified project on schedule.
(4) Liability for guarantee and liability for damages.
4. The rights of Party B mainly include
(1) If Party A fails to provide materials and funds according to the agreed time and requirements, Party B may postpone the project date.
(2) If Party A fails to pay the price as agreed, Party B may urge Party A to pay the price within a reasonable period. If it fails to pay within the time limit, Party B may agree with Party A to discount the project, and the construction project price shall be paid in priority with the project discount.
Article 10 Termination of the Agreement
1. If both parties reach an agreement through consultation, this contract can be dissolved.
2. Party B subcontracts the contracted project to
If there is a third party, Party A has the right to terminate this contract.
3. If the contract cannot be performed due to force majeure, both parties may terminate this contract.
4. When either party proposes to terminate the contract as agreed, it shall send a notice of termination to the other party in written form, and the contract will be terminated when the notice is delivered to the other party.
Article 11 Liability for breach of contract
1. If either party fails to perform or violates any terms of this contract, the breaching party shall compensate the observant party for its economic losses. Unless otherwise agreed in this contract, the observant party also has the right to demand the termination of this contract and demand the defaulting party to compensate the observant party for its economic losses.
2. Party A shall pay the construction project price in full and on time as agreed in this contract, and pay 0.000% of the overdue amount to Party B for each overdue period 1 day.
Article 12 dispute settlement clause
All disputes arising from or related to the performance of this contract between Party A and Party B shall be settled through friendly negotiation. If negotiation fails, submit.
The Arbitration Commission conducts arbitration.
Article 13 Other agreed matters
1. This agreement shall come into effect after being signed and sealed by both parties.
2. After this agreement comes into effect, if there are matters not covered, both parties can sign a supplementary agreement through negotiation, which has the same effect as this agreement.
3. This Agreement shall be governed by the laws of People's Republic of China (PRC).
4. The original of this agreement is in duplicate, each party holds one copy, which has the same legal effect.
Signature of Party A (Buyer): Signature of Party B (Seller): _ _ Date: Date
Construction Contract of Building Project (Part IV) Party A: Lin Ze Village Committee of Beishidian Town.
Party B: _ _ County Gucheng Construction and Installation Co., Ltd.
According to the "Contract Law" and relevant regulations, in view of the road matters in Linze Village; Through consultation, Party A and Party B have reached the following terms of the agreement for mutual compliance.
First, the construction content:
Subgrade shaping and tamping, sewer pipe installation, manhole masonry, concrete pavement pouring, kerb installation, etc. Within the designated area of the village.
Second, the construction period:
Start date:
Date of completion:
Third, the quality requirements:
Carry out the construction in strict accordance with the engineering quality requirements and relevant specifications, and Party B shall bear the rework expenses caused by the engineering quality.
Four, safety construction:
Party B consciously abides by the construction safety operation rules, and all safety accidents caused by violation shall be borne by Party B..
Verb (abbreviation of verb) project settlement method:
According to the actual completion of the project settlement, (that is, area, volume, length in meters) after the completion of the field measurement.
Six, the actual project and price:
1, 160 thick yellow sand concrete pavement in 75 yuan ㎡.
2. Brick ditches (trenching, cushion, bricklaying and plastering, backfilling and tamping, cover plate) 350 yuan.
3. Cement road paving along the stone (100 xxxxx 0300)35 yuan.
4, sewer installation and laying (digging, cushion, cement pipe, pipe hoop, backfill soil compaction) cement pipe diameter 300 90 yuan.
5. Sewage inspection wells contain manhole covers (digging, bedding, masonry, plastering, backfilling and tamping) 620 yuan blocks.
6, artificial excavation of 30 yuan cubic meters.
7. Agricultural vehicles are in 300 yuan.
8. Hooking machine 1800 machine shifts.
9 Tricycle 200 yuan Taiban.
10, odd jobs, working days in 60 yuan.
Seven. Payment terms:
After the project is completed, the project payment will be paid in one lump sum.
This agreement shall come into force as of the date of signing. Matters not covered in this contract shall be settled by both parties through negotiation in duplicate, with each party holding one copy. After the completion of the project, this contract will automatically become invalid.
Party A: (Seal) Party B (Seal)
Authorized Agent: (Signature)
Authorized Agent: (signature) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
Construction Contract of Building Project (Part V) Employer (Party A): _ _ _ _ _ _
Contractor (hereinafter referred to as Party B): _ _ _ _ _ _
In accordance with the Civil Law of People's Republic of China (PRC), the Building Law of People's Republic of China (PRC) and other relevant laws and administrative regulations, in order to clarify the rights and obligations of both parties in the construction process, this contract is voluntarily signed by both parties through consultation.
First project
1, project name: _ _ _ _ _ _
2. Project location: _ _ _ _ _ _
3. Project content: _ _ _ _ _ _
4. Form of contract: _ _ _ _ _ _ _
Article 2 Project duration
Article 3 Project Price, Settlement and Payment Method
Both parties agree to pay the contract price as follows. Before payment by Party A, Party B shall provide an official invoice.
Method 1: The total contract price is fixed. According to the project contract, the total price is RMB _ _ _ _ _ _ _ _ _ (in words: _ _ _ _ _ _ _). No policy factor or market factor will adjust the total price.
1. Party A shall pay RMB _ _ _ _ _ _ _ _ _ _ within _ _ _ days after the signing of this contract.
2. After the project is completed and accepted by Party A, Party A shall pay the project payment of RMB _ _ _ _ _ _ _ _ _;
3. The remaining RMB shall be used as the quality deposit, which shall be paid without interest within fifteen working days after the expiration of the warranty period.
The second method: this contract is settled according to the facts. Both parties use Chenxi software to calculate according to the latest current quota pricing quota and the information price during the construction period (or material ordering period) (the information price is subject to the material price confirmed by Party A), and the calculated total price is deducted by _ _ _ _ _ _% as the settlement price of this contract.
1, and Party A pays RMB;
2. After Party B's construction is completed and accepted by Party A, it shall submit the completion acceptance report and the final statement of the project, which shall be paid to 95% of the settlement price after being examined and confirmed by Party A, and 5% shall be used as the quality deposit, and shall be paid within 15 working days after the warranty period expires.
3. The quantity and price of the project, the visa and the visa form must be signed and sealed by the on-site representative of Party A before they can be used as the settlement basis.
Article 4 Supply and Procurement of Building Materials and Equipment
1. Engineering materials and equipment shall be purchased by Party B. ..
2. The materials and equipment purchased by Party B must be accompanied by product certificate and test report before they can be used in the project. If Party A thinks that the materials provided by Party B need to be reinspected, Party B shall provide the reinspect report as required. Only after re-inspection can it meet the quality requirements be used in the project; If the reinspection does not meet the quality requirements, it shall be returned, and the reinspection fee and return loss shall be borne by Party B. ..
Article 5 Construction and design changes
1. The design drawings, descriptions and relevant technical data signed by Party A shall be taken as the effective basis for construction, and Party B shall not modify them without authorization.
2. In order not to affect the construction progress, Party B shall first implement the changes proposed by Party A due to the use of functions, and conduct on-site visa in time.
3. The increase or decrease of design changes shall be subject to the visa form of Party A's representative, and the total price shall be adopted for the project. The increase or decrease of project funds shall be determined by both parties through consultation.
Article 6 Project Quality Management and Acceptance
Article 7 Safe construction
Party B shall abide by the management regulations on safety production in engineering construction, organize construction in strict accordance with safety standards, and take necessary safety protection measures to eliminate hidden dangers of accidents. The responsibility for accidents caused by Party B's ineffective safety measures and the expenses arising therefrom shall be borne by Party B. ..
Article 8 Quality Assurance
Article 9 Liability for breach of contract
Article 10 Dispute settlement methods
If any dispute arising from this contract cannot be settled through consultation, both parties have the right to bring a lawsuit to the people's court where Party A is located.
Article 11 Supplementary Provisions
Party A: _ _ _ _ _ _ Party B: _ _ _ _ _ _
Representative: _ _ _ _ _ Representative: _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Construction Contract of Building Project (Part VI) Party A: (hereinafter referred to as Party A)
Party B: (hereinafter referred to as Party B)
According to People's Republic of China (PRC) Civil Law, People's Republic of China (PRC) Building Law and other relevant laws and regulations and the requirements of the construction unit, Party A decides to contract the project to Party B. Based on the principles of equality, voluntariness, fairness and reasonableness, both parties sign the following contract through consultation for mutual compliance.
Article 1, Items and Contents
I. Project name:
Second, the project site selection:
Three. Scope of contract: all projects except elevators within the scope of construction drawing.
Fourth, the project quality standard: one-time acceptance. One-time unqualified acceptance will be deducted.
Verb (abbreviation of verb) Contract price: fixed unit price contract: brick-concrete structure 800 yuan/square meter (in words: eight hundred yuan)
Term of intransitive verb contract: the total term is days, and the start date is year, month and day.
Seven, before the start of water and electricity by party a to the construction site, and ensure the construction use, but
Eight. Settlement method: fixed unit price contract: fixed unit price x actual engineering quantity.
Nine, advocate material comes into play: all materials in this project must use national standard products, such as unqualified.
X. Payment method: No advance payment will be paid before the project starts, and% of the project payment will be paid after the project is capped;
XI。 Warranty period: the warranty period is one year from the date of acceptance of the project.
Article 2. Rights and obligations of both parties
I. Rights and obligations of Party A
1. Contact the site engineer, provide Party B with the existing traverse points, leveling points and coordinate control points, and review Party B's survey data.
2. Provide Party B with the required construction drawings.
3, responsible for contact with the field engineer, superior units and other relevant departments.
4. Conduct regular supervision, inspection and guidance on the engineering tasks of Party B's construction, and have veto power over the engineering quality, progress, safety, environmental protection and civilized construction on site, and take corresponding treatment and punishment measures according to the actual situation of the project.
5. During the construction, Party B has the right to adjust the project scope and quantity according to Party B's construction capacity and progress.
Two. Rights and obligations of Party B
1, prepare the implementation construction organization design, draw the construction drawing of sub-projects and submit the commencement report.
2. According to the requirements of Party A, ensure to organize the corresponding funds, personnel, equipment, materials and instruments to enter the site to complete the construction of the project.
Party A:
Party B:
Date, year and month