2. Trim the lines. After the jade bracelet is roughly polished, the next step is to trim the lines of jade. First of all, prepare the sand gum alcohol lamp. Firstly, the flaky sand gum is burned and melted with an alcohol lamp. When the alcohol lamp stops working, put the melted glue on the support of the alcohol lamp, and then the alcohol lamp starts working. The mortar on the bearing is heated with alcohol lamp, and then leveled with iron sheet. Finally, the edge of the jade bracelet begins after the sand glue forms a disc shape.
3. Trim the smooth surface. After finishing the edge of the jade bracelet with alcohol lamp, the next step is to finish the smooth surface of the jade bracelet. It is necessary to prepare different types of brushes, and then clean the surface of the jade bracelet with a brush dipped in polishing powder oil. In order to polish more evenly and fully, the brush should be wiped clean in every corner of the jade bracelet.
4. Plastic surgery. This process is the most detailed step in polishing jade bracelets. First, the bamboo sticks are woven into various types of sectors, then the prepared bamboo sticks are soaked in the grinding paste of cutting stones, and then the uneven parts of the jade bracelet are repeatedly polished with the bamboo sticks stained with polishing powder and a proper amount of cold water until they shine, and finally the brown paper stained with brightener is repeatedly polished.
5. Put it in a magnetic cleaner. After all the above steps are completed, put the polished jade bracelet into a magnetic cleaning machine for cleaning, then add a proper amount of jade cleaning agent and tap water for cleaning, and then blow dry with a hair dryer.