Hanergy Water Purifier comes from international quality, and adopts fully intelligent microcomputer prompt system to intelligently monitor the use and life of filter elements. According to the water flow induction, the service life and replacement cycle of each filter element are automatically reminded to ensure the quality and freshness of the outlet water of Hamilton water purifier safely and effectively.
The MTF composite filter used in Hamilton water purifier can effectively remove heavy metals and residual chlorine in water. The filtration accuracy of Hamilton water purifier reaches 0.000 1 micron, which is equivalent to 1% of a hair. Effectively remove all harmful substances in water and keep mineral components beneficial to human body.
Second, Halton HRD-7503(RO reverse osmosis) water purifier
Material: luxury integrated shell with LED LCD computer micro-control.
Filtration process: PP+ granular carbon+compressed carbon +RO membrane +T33.
Filtration accuracy: six-dimensional purification 0.000 1 micron.
Size: 360* 160*480mm 2 tap.
Flow: 284 liters/day
Configuration: Hamilton standard
Third, the most popular brands in the market are Midea, Hamilton, Qinyuan and Angel. Pay attention to the following points when purchasing a water purifier:
First of all, look at the local water quality, whether to use RO machine or ultrafiltration machine.
Second, look at the service level and attitude of dealers.
Third, look at the price level you accept.
Fourth, look at after-sales service
Fifth, look at the appearance of the product, like it or not.
Sixth, look at the product function, whether it is suitable for use,
Seventh, look at the daily drinking water, 75G or 50G.
-Listen and see more, understand first, and then choose!
Fourth, the installation method:
Installation steps of water purifier (key points)
Step 1: Check whether the spare parts are complete.
Step 2: Connect the main engine and the filter element.
Step 3: Install RO membrane, and tighten all connectors and filter bottles with a suitable wrench.
Step 4: Take out the pressure barrel, and install the small ball valve of the pressure barrel at the inlet and outlet of the pressure barrel (note: don't rotate it too tightly, which is easy to crack).
Step 5: Install the faucet in the proper position of the water tank (put the washer in the main shaft of the faucet head and put the faucet in the water tank.
The place to punch in. , fixed)
Step 6: Fix the faucet, and then insert 2 branches into the joint with the faucet (Note: the joint between 2 branches and the faucet must be
Installed in place, 2 in charge of the appropriate length)
Step 7: Cut appropriate water pipes and connect raw water, pure water, pressure barrel and waste water pipes respectively.
Step 8: Close the main water inlet valve, and install the water inlet tee and 2-point ball valve (Note: Never mistake the hot and cold water inlet pipes and RO machines.
The inlet water is cold water. Check the water pressure before installation. If it is higher than 0.4MPa, please install the pressure reducing valve device. )
Step 9: first connect the main engine with the pressure barrel, then connect the main engine with the water inlet, cut a pipe with a suitable length and connect it to the wastewater.
At the exit, the other end is connected to the sewer, and then the waste water pipe is fixed with a tie.
Step 10: Straighten the connected water pipes and tie them tightly with tie straps. (now installed)
Step 11 (Debugging): Place the pressure barrel and the main engine, straighten out the water pipes, plug in the power supply and connect the water source. (Note: Be careful.
Check whether the water pipe is straight to prevent the water pipe from being discounted)
Step 12: Open the ball valve of the pressure barrel, check whether there is water seepage in each joint nut, and conduct debugging.
Step 13: Explain the precautions to customers. (Note: After the machine makes water 1 hour, please drain the water in the pressure barrel, and then reduce it to 1 hour.
Then put another bucket, and the water can be drunk directly)
The fourteenth step; Clean up the site, clean the water tank and tidy it up.