Personal Work Summary of Maintenance Worker 2022 Model essay 1 Time passes quickly, and before you know it, one year will reach the end of the year. Looking back, I gained a lot this year. Thanks to their conscientious teaching, I can't grow up without them! The following is a summary of my work:
I. Goals to be achieved in 20xx
When I first became a full-time employee, I set a goal to standardize my maintenance process. This year, we should be able to complete all plastic surgery, door replacement and minor accidents independently, and also master the maintenance technology of major accidents as soon as possible. At the same time, we should also get rid of carelessness, improve the quality of maintenance, put an end to repair rate, and do a good job in every car. This is not only responsible for customers, but also for ourselves; At the same time, we should learn as soon as possible, strive to learn more technologies and strive for independent maintenance. Now it seems that the original goal has been achieved, and it can be repaired by itself after coming to the car, and both the maintenance process and the maintenance quality have been greatly improved; No longer the original rookie!
Own problems and advantages:
I also have some shortcomings in my usual work, and I am a little careless. Although my talent is not as good as being treated, I am not afraid of being dirty and tired, and I am willing to learn. Otherwise, what is waiting for me is being "eliminated"!
Second, new goals for next year.
1, further standardize your own maintenance process, improve your own maintenance quality, and try to put an end to maintenance;
2. Grasp the maintenance of major accidents as soon as possible. Key points, skilled use and maintenance as soon as possible;
3. Participate in more training, strengthen your skills and learn more new maintenance techniques;
4. Improve your maintenance efficiency as much as possible and maintain the most vehicles in a limited time;
A new year, a new atmosphere, adjust the mentality, grow in training, and hone in work. Meet the new challenges in 20xx!
Personal Work Summary of Maintenance Workers in 2022 Fan Wener Hello, team leaders and workers:
A few years have passed. Looking back on the work in the past year, there are both positive and negative aspects, but the success outweighs the difficulties. The year-end summary should be carried out not only in the workshop section, but also in the team. If you can't summarize, you can't. We should sum up our own advantages and disadvantages and let everyone know which ones should be kept and which ones should be improved.
Following the smooth momentum of * years, the advantages are constantly improving, and the shortcomings in all aspects are gradually overcome and resolved through consultation. First of all, the guiding ideology of maintenance is to have advanced consciousness: the transformation design of equipment should have advanced consciousness to meet production; Maintain equipment and manufacture spare parts with advanced consciousness. If you have the conditions to go to work, you must go to work if you have no conditions to create conditions. To sum up, there are the following points:
First, security.
Without safety, there is no production, which is an important content of people-oriented and humanized management. The safety meeting is boring, and it needs to be combined with reality and talked tirelessly. Spare no effort to analyze and educate employees with examples, and the team leader takes turns to speak every week, which involves all aspects of practical work. Implement a safety management system that combines team leader responsibility system and step-by-step responsibility system, and implement a safety production management model with four no injuries as the main line. Emphasize the close integration of self-insurance, joint insurance and mutual insurance, and implement specific rules and regulations and safety measures into practical actions. In order to reduce the occurrence of safety accidents, the workshop will organize collective safety meetings from time to time and take various ways to intercept them. In the past eight months, there have been three minor injuries, and no other serious injuries and public deaths have occurred. This should be carried forward and done better in future work. Let's care for ourselves, our families and our society.
Second, the equipment
Stable operation is the eternal theme of production and the goal we pursue. With everyone's efforts, this goal has become a reality. The damping rate of equipment is at the advanced level in the same industry all year round, and the utilization coefficient of blast furnace is 3, 8~3 and 9, and a few of them can reach above 4 and 0. Some original equipment with unreasonable design was reformed in a planned way, including belt drive system, hot air dust removal system, fan system and feeding system. Through the transformation, it not only saves manpower and material resources, but also achieves twice the result with half the effort, which everyone should have a deep understanding in the second half of the year. At present, the key is how to maintain the existing achievements, production can not be slack, can not be carried away by victory, we must persistently and conscientiously implement the point inspection system and do a good job in equipment management from the details.
* 2008 is the last year of the 11th Five-Year Plan of China, and it is also a crucial year for energy conservation and emission reduction. Our factory made full use of this power outage accident to overhaul the main winch systems of two blast furnaces, which provided reliable guarantee for long-term continuous production in the future. At the same time, the hot blast stove, slag flushing water and circulating water system were overhauled, and the main line of 1 blast furnace standby slag flushing water pipe was laid.
Third, staff training and management.
Carry out technical training. In view of all kinds of problems encountered in the maintenance process, we explained them on the spot in time, which improved the workers' ability to deal with problems. At the same time, training was carried out in a planned way, which improved the professional skills and quality of employees and raised the overall level of the team to a new level.
Carry out the employment strategy of combining the survival of the fittest with raising salary, stabilize outstanding employees, affirm the ability and difficulties, and implement humanized management. The maintenance team is stable at about 40 people, although there are not enough places (we have fewer people in the same size and position). But it can also cope with maintenance and emergencies.
Management tends to be smooth, and everyone can regulate their behavior within a certain scale, reducing the phenomenon of excessive and disputes. Our management goal is to govern by doing nothing, let everyone know what to do and how to do it, implement the collective ideology, and create a workshop cultural spirit that loves the collective, loves honor, does not care about it, and does not shirk. These spirits may be out of tune with the atmosphere of today's society, but we can't do our work well without them.
Fourth, shortcomings.
Things that need to be improved or overcome in the work are mainly manifested in the need to improve team building, some people do not know enough professional knowledge, and overtime or rework occurs in the work. Poor post management, post workers are not dedicated to the maintenance of equipment, leaders in some places are kind, and there are many phenomena of man-made damage to equipment, which adds a lot of extra burden to maintenance workers. The key factor is that people are not things, and good things should be mastered by good people. The leaders of individual departments do not pay enough attention to this, which makes the maintenance work very passive in many cases. These deficiencies are also reflected in the factory, which is gradually improving.
Now that we have entered * years, our achievements can only represent the past, not the future. We should do our job well in a down-to-earth manner and prepare to write better results into the year-end summary report. Thank you!
Summary of personal work of maintenance workers in 2022 Fan Wen 3 Since this year, under the care, help and correct guidance of leaders at all levels in the factory department, all employees in the crown block workshop have carefully operated and operated safely, completed various tasks quickly and effectively with high-quality services, and actively grasped the maintenance and overhaul of crown block equipment. It ensures the smooth completion of all production in the hot coil factory. Here, the work of the seminar in the past year is summarized as follows:
I. Achievements:
The safety management of crown block focuses on two aspects: first, the safety education of crown block workers; The second is the safety inspection of equipment. The misoperation of crane operators and pathological operation of equipment are important factors leading to accidents. Therefore, the work of the crown block workshop mainly starts from these two points.
1, Safety Management of Crane Operators
The stability of crane operators' thinking, concentration and love of their work are important prerequisites to ensure the safe operation of cranes. Safety work is the most important work in workshops and teams. The workshop requires each team to use the time before or after work every day to organize everyone to learn the safety knowledge related to the crown and the importance of the safe operation of the crown, and to cite some accident cases to arouse employees' attention to safety work. Deeply understand the importance of safe production, and put an end to harmful factors such as fatigue at work and taking up jobs after drinking; It also summarizes the problems existing in the daily operation of lathe operators and the problems foreseen and discovered in advance, and takes it as the focus to correct them. Organize the study of safety responsibilities and safety operation procedures, and distribute them to employees in paper form, which further improves employees' safety awareness and self-protection ability.
The good professional quality and strong sense of responsibility of crane operators are also important guarantees for the safe operation of cranes. Workshop to improve the quality of employees, improve the level of operation, to ensure the safe and civilized production of crown block. Through learning, employees actively improve their work, enhance their sense of responsibility, and constantly demand progress. Through the strict management and assessment system of group skill appraisal, we will strengthen the discipline of employees, enhance their sense of responsibility, encourage the advanced and urge the backward, achieve the goal of * * * promotion, and create favorable conditions for serving the production.
2, equipment maintenance and safety management
Over the past year, the workshop has carefully organized and reasonably arranged the work of crown block according to the deployment of branch factories and sections. Summarize the problems found and accumulated at ordinary times, constantly revise and gradually improve the management system, so as to put our crown block maintenance on the right track. Specific practices in the work:
1. In daily work, check and test run in strict accordance with the handover system, ensure strict handover, handle problems in time when found, and avoid equipment running in spite of illness.
2. In the process of overhaul and maintenance, cooperate with the mechanic to carry out a systematic and comprehensive inspection of the whole vehicle, pay special attention to the place with high failure frequency, and take it as the key inspection part every time. During the inspection of the vehicle, potential safety hazards are found many times, such as improving the bumper of the crown block of the rolling mill; K3 crown block brake power angle slot screw looseness and vibration problems; Temporary wiring of K8 crown block cab and other potential safety hazards have been solved one by one.
Second, the shortcomings:
Looking back on the work in the past year, although there are some achievements, there are also many regrets, and there are still some shortcomings in team work.
1, management work is not bold enough, there are many concerns, and the working methods need to be improved.
2.20xx May, the team had a rolling accident, and felt that the team needed to deepen business learning, improve operational skills and improve their own quality.
3. Due to the lack of work experience, some problems in team management and safety management are still lacking in foresight.
Three. Work prospect in 20xx:
1. In terms of management, it is necessary to constantly revise and improve the management system, so that operators can more deeply understand the responsibility of crown block as a special industry, so as to do their job more conscientiously and love their job!
2. In terms of equipment maintenance. Operators are regularly required to clean the overhead cranes they use to keep the equipment clean. At the same time, the operator is also required to have some necessary understanding of the performance of the crown block and the parts prone to failure! In order to ensure that the crown block can accurately tell the fault location when it fails in operation, so that the dispatcher can correctly judge whether to find an electrician or a fitter to repair it, save time and ensure the normal production.
3. Strengthen employees' post responsibility and labor discipline, deeply and carefully analyze the hidden dangers of crown block equipment accidents, and put an end to fluky psychology and carelessness. Resolutely implement safety to ensure that minor injuries and above accidents are zero. From the experience and lessons of past accidents and accidents, grasp the enlightenment and control methods, so that everyone has experience and can see the danger.
4, closely around the factory staff and posts, reducing staff and increasing efficiency, reasonable arrangement of team work, cohesion, sincere cooperation, and strive to make the work of the crown block workshop to a new level in the new year!
Over the past four years, with the help and guidance of master colleagues, senior lecturers and school electrician leaders, my professional knowledge and maintenance technical level have been greatly improved through self-study and work practice. We have successfully completed the work of this post and achieved certain results. The maintenance work in recent years is summarized as follows.
I. Installation and maintenance of circuits and electromechanical equipment
Our school is a provincial key technical secondary school. There are metalworking, plastic mold, numerical control and other practice workshops and various professional laboratories. Equipped with a large number of advanced teaching, experiment and practice equipment. Such as CNC lathes, CNC milling machines, 3D projection imagers, plastic injection molding machines, wire cutting and EDM machining. With the help of professional teachers, I participated in the installation and debugging of most mechanical and electrical equipment and did a good job in daily maintenance of mechanical and electrical equipment.
Through years of maintenance practice, it is realized that the responsibility of maintenance electrician is to ensure the normal operation of school teaching, living lighting and other systems. As a maintenance electrician, in addition to the reasonable installation, good debugging and daily maintenance inspection of equipment and lines, how to quickly find the cause of the fault and correctly handle the fault is an important prerequisite to ensure the normal operation of the equipment. Realize quick judgment; Excellent maintenance skills to correctly handle faults, we must do the following aspects.
1. Keep learning new technologies and knowledge and be familiar with new equipment and appliances.
2. Theory guides practice, and the accumulated experience is constantly summed up in practice, so that troubleshooting is faster.
3, in the process of troubleshooting, take the way of combining analysis, detection and judgment, and gradually narrow the scope of the fault.
4, to do a good job in the installation and maintenance of assembly line equipment, in addition to electrician professional knowledge and excellent maintenance skills, you should also have a variety of professional knowledge. In recent years, I have taken advantage of my work in an engineering school to study courses such as mechanical foundation, mechanical processing foundation, mechanical equipment installation and maintenance, and equipment control foundation. Expand knowledge and improve the level of maintenance technology.
Second, automatic control and safe operation of electrical equipment
Because the school is far away from the urban area, the supply of tap water in the urban area is not enough, and there is a shortage of water in the surrounding areas, so the water for living and fire fighting is all solved by pumping groundwater from wells. There are 5 deep mechanically drilled wells and 1 artificial shallow wells in the whole school, equipped with 5 deep-water electric pumps, 2 centrifugal pumps and 5 roof water tanks. In order to ensure water supply and save water, the water supply pipe network was reformed and automatic control devices such as liquid level gauge and solenoid valve were installed. In order to ensure the safe and reliable operation of the pump motor, in addition to the motor overload, overheating and short circuit protection, the motor phase failure protection device is also installed. The main contacts of two AC contactors are connected in series in a three-phase circuit, and each contactor coil (380v) is connected to A-B and B-C phases respectively. When any phase in the three-phase circuit is open, a contactor coil will lose power and cut off the power supply.
Three-phase power supply of the machine protects the motor. Through years of practice, it has been proved that this power shortage protection method is simple, safe and reliable.
Third, the transformer capacity expansion work
With the continuous development of school teaching scale, teaching, experiment and practice equipment, office and living facilities are increasing day by day, and the electricity consumption is increasing sharply. The original power transformer is overloaded and needs to be expanded urgently. By counting the electricity consumption of school electricity facilities, the peak electricity consumption is tested. According to the electricity demand of all departments of the school and the requirements of the school's sustainable development, the expansion capacity is determined, and the transformer expansion plan is formulated, which is approved by the school leaders.
Fourth, the standby power supply operation and maintenance work
The school is located in the suburbs, equipped with diesel generator sets for emergency power supply. Due to the limitation of conditions, the generator capacity is small, and after the mains power is cut off, self-generated electricity cannot meet the demand of school electricity. Through investigation and calculation, and according to the characteristics that electric power is mainly used for teaching practice facilities during the day and lighting at night, the power consumption of important departments is ensured, the self-supplied power distribution table is compiled, and the power supply is scientifically and reasonably distributed, so that the spontaneous emergency power supply can reach the state. Seriously study the construction principle and maintenance technology of diesel engine, do a good job in the operation data record and daily maintenance of generator sets, and regularly check, maintain and charge the starting battery. Ensure all-weather emergency start-up power supply of the generator set.
Five, the safe use of electricity, electricity saving work
1, strictly abide by the safety operation rules and use qualified electrical products and materials during maintenance.
2. Strengthen the management of safe electricity use in student dormitories in schools, participate in the formulation of detailed rules for safe electricity use in student dormitories, prohibit students from using high-power electrical appliances in dormitories, and install current-limiting control devices for circuits in each dormitory to ensure the safety of electricity use in student dormitories and eliminate fire hazards.
3. Regularly check the safe use of electricity by all departments and systems, and make timely rectification when potential safety hazards are found.
4. Regularly check the lightning protection grounding of buildings every year, and the grounding resistance of electrical equipment protection grounding system. The grounding resistance of the system can not meet the requirements of the specification, and it can be rectified within a time limit.
5. Install leakage protection devices with electrical appliances, especially the two-phase leakage protection air switch of electric welding machine in metalworking practice workshop.
6. Comprehensively optimize and transform the original overhead power lines in the school, and change the overhead open wires into underground laying according to the specifications to ensure the safety of power supply and make the campus environment clean and elegant.
7. In view of the situation that the school electricity consumption drops sharply in the middle of the night, the voltage rises, and the lighting lamps in campus roads, corridors, passages, gates and other places need to be on all night, and most of them use incandescent lamps, the method of installing diodes to reduce the voltage has solved the problems of short service life and high replacement and maintenance rate of incandescent lamps in these places. Other places adopt new energy-saving lamps according to the actual situation to save energy.
In a word, I have done some effective work in the practice of maintenance work by using the technical knowledge I have learned in the work of maintenance electrician for many years, and have certain maintenance technical work ability. However, there are still some shortcomings such as low education level. In my future work, I will overcome the learning difficulties when I am old, study new technologies and knowledge hard, and strive to further improve my technical level.
Looking back on the past 20xx years, the locomotive depot has made certain achievements in all aspects based on the principle of taking the overall situation into account, seizing time, emphasizing quality and ensuring production. Job performance has the following aspects:
First, in terms of production task guarantee: seize time, emphasize quality and ensure production.
The nature of our maintenance work determines that we must have a reasonable and feasible maintenance plan before maintenance; Adequate preparation of maintenance materials; Strict time management, pay close attention to every minute of maintenance; And with the strong support of the technical director, each maintenance task is completed with good quality and quantity. For example, the replacement of the remaining parts of the slender belt and the renovation of the old joints this year; Replace the broken 2# belt; Maintenance of industrial and mining equipment; Full cooperation of outsourcing personnel; The maintenance of all large motors and all electrical cabinets in the department has achieved the above points. Repair of damaged side bearing of broken pulley, repair of damaged bearing of flat-hole plate feeder reducer and repair of broken chain plate of supporting wheel of flat-hole plate feeder can all show that the maintenance section is a section that can fight hard and dare to fight hard.
Second, maintenance safety: "Safety first, prevention first"
During each overhaul, the correct wearing of personal labor protection articles by each employee, the publicity of safety precautions in maintenance and the supervision and inspection of safety behaviors in maintenance are all managed and implemented step by step, achieving zero safety accidents throughout the year.
Third, work discipline and time management: "Strict first, tight first"
Work discipline should be strictly managed, standardized, treated equally, found together and handled together. Time management is to be in the forefront, and every minute is counted as usual maintenance and emergency repair, so that employees gradually realize that saving time is the best way to improve work efficiency.
In the first half of the year, work discipline and time management were not very good, and employees' usual maintenance efficiency was low, lacking work passion and good work attitude. In the second half of the year, under the strict management of department leaders, the maintenance efficiency, work passion and work attitude have been obviously improved, and they are gradually developing into excellent workshops.
Next year, the maintenance department should strengthen the publicity and implementation of employee performance contracts, strengthen the assessment and implementation of daily examinations and daily examinations, and let employees understand that it is not the system that wants me to do well, but that I want to do well. Strengthening the training of maintenance operation skills, especially the training of electrical maintenance classes, has greatly improved the overall operation skills of employees, thus ensuring the improvement of maintenance efficiency and quality. Strengthen the training of team leaders, improve their personal abilities such as technical ability, overall planning ability and coordination ability, and lead the whole class and the whole paragraph to work together for the smooth completion of departmental tasks next year.
Summary of personal work of maintenance workers: As a qualified carpenter in 2022, Fan Wen 6 must abide by professional ethics and strictly control quality. I will summarize my work in Hongfa Coal Industry as follows:
First, the ideological and moral aspects:
Actively participate in all kinds of study and training, seriously participate in political study, and improve ideological awareness. I also know that I should take the lead. In my work, I am proactive, diligent and responsible, and willing to accept all the work assigned by the leaders. I also pay attention to cultural learning, and strive to improve my ideological consciousness, theoretical level and professional ability rapidly in continuous learning.
Second, the work:
In the process of decoration, woodworking projects often belong to a major item. From the perspective of decoration, carpentry basically represents decoration.
Woodworking projects include wooden door installation, door and window cover making, curtain box making, window bucket making, veneer making, furniture making, etc. All wooden parts have been treated with fire prevention and corrosion protection, and the wall surface in contact with the wooden keel has been coated with asphalt paint for three times. The four sides of the wooden keel at the grass-roots level and the back of the grass-roots board are treated with fireproof paint for three times to meet the specification requirements. The specifications and dimensions of the wooden keel frame on the wall are designed according to the requirements, and the surface of the decorative board is pasted at the grass-roots level with blockboard and plywood. Drill a hole in the wall with an electric hammer, drive in an anticorrosive wooden wedge, fix the finished wooden keel on the wall, nail it firmly, level it, drill and paste the plywood base, and paste the surface of the decorative board outside. Doors and windows adopt wooden keel 18 joinery board, and the curtain box 18 joinery board is pasted with decorative board at the base. Fire prevention and corrosion protection are the same as before. After the construction of aluminum alloy window frames, window covers should be carried out to prevent eating. Door leaves and furniture adopt multi-layer method. The specific method depends on the design. When making furniture with blockboard, dovetail joint glue is used to assemble and connect with wood screws. When installing the door, connect it directly to the door cover. When installing doors, strictly implement national standards. When installing, determine the opening direction, hardware model and installation position of the door, check whether the door opening meets the drawing size, and pay attention to the smoothness of door and fan installation.
Third, learn to do things:
Years of work practice have warned me to study hard, ask questions hard and practice hard. During my work, I never know how to understand, from understanding to innovation, cultivate my moral character, think and study my business diligently, integrate theory with practice, constantly update my professional level and improve my working ability. Form a down-to-earth attitude, practice hard, study hard, unite with colleagues, respect colleagues, ask colleagues more questions, operate in strict accordance with operating norms, and create a good working environment for yourself. From the aspect of knowledge renewal, we should learn new technologies, new processes and new materials, master key technologies and ensure the quality and skills of woodworking projects.
Fourth, the future outlook:
In the future work, I will constantly improve my professional knowledge, professional technical level and cognitive ability, constantly improve myself and strengthen my internal quality to adapt to the development of woodworking industry. Actively study various specifications, procedures and standards, high standards and strict requirements, and constantly sum up construction experience, which made me by going up one flight of stairs in woodworking.
Summary of personal work of maintenance workers in 2022 7 20XX years will soon pass. During this year, I persisted, studied hard, and dared to attack hard, and became the "technology" in the station, creating direct economic value for the enterprise10.5 million yuan. In the ordinary maintenance post, I won everyone's respect and users' praise with selfless work spirit and skillful maintenance skills.
First, study hard and strive to be a top technical soldier.
There are roads in the mountains, but the sea of skills is endless. After arriving at the maintenance station, I only know that as a skilled worker, if he can't understand the drawings, the principle of equipment and the structure of vehicles, he will not only be embarrassed, but also be an unqualified worker. I overcame the disadvantage of low education level and "refueled" myself with a kind of "bull's strength" that I won't stop until I reach my goal. In order to buy some useful technical books, I often squeeze some change out of my living expenses to buy books and research skills. I have taught myself technical theories such as vehicle structure and mechanical foundation, and applied what I have learned to production practice to continuously improve my professional skills.
Sometimes, in order to find out the ins and outs of an accessory, I will study the technical data all night, and I will never give up until I understand it; Sometimes, if I can't finish it in the workshop, I will take it home to get it. Over time, my home has become my "research institute". Everything comes to him who waits. After studying hard, I have achieved my professional skills. In several technical competitions of cities or companies, I showed my advantages every time and returned to the list. I am not complacent about my achievements. I know that although I am an external employee, the maintenance station has given me a platform to really display my talents. On the road of learning professional technology, there is no room for any falsehood and slack. I will make unremitting efforts to make new contributions to the enterprise.
Second, be brave in tackling the problem and solve the problem of restoration.
With my intelligence and professional skills, I have solved a series of difficult problems for users, overcome one difficulty after another, and become a trusted "technical expert". Nowadays, any technical problems in the workshop can be solved as long as Master Zhao gets started.
In April this year, the dispatcher informed me that there was a Passat 2 and 0 car, which was forced to downshift. I went to several repair shops and couldn't fix it, so I came to our station to fix it. As soon as the car was repaired, I immediately took the instrument and tested it with the owner. During driving, it was found that when the vehicle speed reached 65,438+000 yards, the fourth gear was automatically reduced to the third gear, and the engine had abnormal noise. The owner said: there was a problem three months ago. I looked for a number of repair shops, but I couldn't find the problem. I repaired it three times in the second pit. I suggest changing the gearbox. I think the cost is too high, so I'll come to our station to have a look and make a decision. I judge that the failure of "insufficient engine power, resulting in forced downshift" is most likely caused by three non-catalytic blockages. The owner said that it had been checked by short circuit method at the second station, and no problems were found. After the test run, I checked it again in detail, and it was still confirmed as three-way catalytic blockage. The owner is dubious, and I promise to the owner that if this problem is not solved well, this site will not charge any fees. After removing the three-way catalytic device, it was found that the blocking area had reached more than 85%. After replacement, the fault was successfully eliminated, which not only relieved the user's troubles, but also saved a lot of money. The user said with satisfaction, "The trouble that bothered me for three months was solved in less than three hours. The technology of your maintenance station is great."
Third, love and work to meet the needs of users.
"Users are God and must satisfy me" is my work creed. Whenever and wherever a user calls, I am on call. I haven't been home for a long time last National Day. I'm going to take my wife and children back to my hometown to spend the holidays with my parents during the holiday. That day, my wife and I were having our hair cut and dyed in the hair salon. Just in the middle of painting, we received a call from the maintenance stationmaster: a car of the Oil Production Technology Research Institute broke down on Dagong Road in Harbin and needed emergency rescue. I know in my heart that the unit is on holiday and there are insufficient repair personnel. A strong sense of responsibility made me forget to dye half my hair. I quickly asked the barber to wrap my head in plastic film and set off for the scene at once. The wife advised, "Why don't you go when you're done?" I said, "No, the user's help is a silent command. The car broke down on the expressway and people didn't know how to worry. " Customers are grateful to see me come to the rescue like this. It's already past seven o'clock in the evening when I return to the unit after troubleshooting the vehicle. The user insisted on inviting me to dinner, but I politely refused. The user said: "Your station is not only first-class in technology, but also provides on-site service." That's what I do. I think what users think, worry about their urgency, help their needs, and win the praise of users again and again with my enthusiasm and practical actions.
Fourth, teach the profession as a teacher and teach skills to educate people.
"A flower is not spring, and a hundred flowers bloom in spring." . 15X is not only technically excellent, but also enthusiastic about taking apprentices and cultivating talents, giving full play to its light and heat for the long-term development of enterprises. I have brought more than 30 apprentices, and summed up a set of "apprentice mentality" of "two hearts" and "three components" in practice, that is, concentrate on skill learning; The actual operation should be "mouth diligent", "hand diligent" and "leg diligent". Insist on every apprentice you bring: be persuasive, set an example, not only teach business skills, but also bring character. Some of my apprentices have taken up technical management positions in the unit, and some have become the production backbone of the unit. Every year, peaches and plums are fragrant, and after each year, I have accumulated talents and strength for the enterprise with hard work and sweat.
In 20xx, I will continue to serve users with full enthusiasm, win customers with excellent technology, contribute to the enterprise with a loyal attitude, and write a touching song of youth in an ordinary post.