2. under construction? In the dialogue, play? Name? Change your name and cancel? Use default template? Check the previous box, and then click OK.
3. Click on the menu bar to enter, and select Rotation in the drop-down menu.
4. Click Place in? Sketch? Menu click? rule ...
5. In the Sketch dialog box, select Right as the plane, Top as the reference view direction, and then click OK as the direction selection.
6. Draw a sketch according to the dimensions shown in the figure below, and tick "√" in the lower right corner after drawing.
7. Move the mouse to the Z-axis position of the coordinate system, click the left mouse button to select when the Z-axis turns blue, and finally click √.
8. Click Insert on the menu bar and select Spiral Scan Incision from the drop-down menu.
9. Select the right plane, click the use icon, select the line as shown in the figure, and then tick "√".
10. Enter 1.5000 in the input pitch value box, and then tick "√" to draw a sketch with reference to the dimensions shown in the figure below. Click "√" in the lower right corner after drawing, and finally click OK in the Cut: Spiral Scan dialog box.
1 1. The threads drawn are as follows.