How to correct the direction when reversing into the garage
The principle of correcting the direction is based on the rear of the car. If the rear of the car wants to lean to the right, turn the steering wheel to the right. If the rear of the car leans to the left, turn the steering wheel to the left. direction, and then return to the opposite direction. If the car is in the shape of \, it means that the rear of the car is tilted to the right and turned to the left. When the body is upright, it will be straight. When the car becomes /, it means the car tilts to the left and turns to the right. When the car body is upright, it returns to straight. The car is |-shaped, but the left side is wider and the right side is narrower. Turn left and adjust to the rear track line, which is the ideal range. Turn left again and return to straightness. When the warehouse is inverted, the correction direction should be about 1 meter in advance. Otherwise, when reaching the warehouse corner, there is a possibility of overshooting even if the correction is made.
How to use the steering wheel to correct the deflection of the rear of the car when reversing into the garage.
The coach doesn’t teach. . . . Hit whichever side you prefer. . . . Using the front of the car as a reference, if the rear of the car veers to the right, it is equivalent to the front of the car veering to the left, right? Then turn left. I don’t know how your coach taught you to look at the rear of the car. When I reverse, I always look at the front of the car to see if the front of the car is straight. How can the rear of the car be so intuitive? But since your coach teaches you this way, just listen to him. Don’t argue with him and endure it. Just take the monthly test and that's it. I can teach you how to drive and how to drive well, but your coach can teach you how to get the license plate. Listen to him, get the license card first and then talk about it
After reversing the car into the garage, return to the forward direction. How to correct the direction from the rearview mirror
In the situation like your picture, you need to turn the steering wheel to the left, but it is basically all the way to the end. Just turn it a little bit, and it is estimated to be about half a turn to a full turn.
Remember one thing: walking in that direction is like hitting a plate in that direction, just like asking for a car. It makes no sense.
In addition, when entering the warehouse, you can look at the mirrors on both sides to make sure that the distance between the two sides is about the same width and there will be no pressure.
How to correct the direction when reversing an automatic transmission into a garage
For example, when backing into a garage on the right: (Same as for a left garage) Learn to look at the rearview mirror, the distance between the tires and the garage. The instructor said that the distance between the tires and the garage is 2 finger widths. Accurate distance
1. Drive in the direction closer to the upper right corner: go back half a circle or one circle and wait until the right rear wheel enters the warehouse and passes the upper right corner (do not go back as soon as the right rear wheel arrives) and continue forward. When the vehicle body is almost straight but not straight, return to the right direction (at this point, I check whether the front of the car is straight or not, and you can also look at the rearview mirror). Pay attention to the position where the car is almost straight or not.
2. Drive in the late direction toward the upper left corner: If you find that the tire in the rearview mirror is far away from the upper right corner, immediately look at the left rearview mirror. At this time, do not turn back and let the car wait for the left rear wheel to come in. After passing the upper left corner of the warehouse, return to the right direction and continue to the left direction. When you see the left rearview mirror, enter safely on the left side. Immediately look at the right rearview mirror and wait until the car body is almost aligned. If not, return to the right direction and enter the warehouse
3 , It’s better to do it early than to do it late. Now I don’t want to get it right at the first time when entering the vehicle because it’s difficult. I always click the direction in advance before correcting the vehicle entry
4. When reversing the vehicle, the clutch must be steady and the speed slowed down. You will have a long time and opportunity to do what you want to do
How to correct the direction if you reverse the truck into the warehouse early or late?
If you can correct the direction, then there will be no problem if you reverse the truck into the warehouse. Yes, this is how it all came about! ! There are three situations when correcting the direction of the inverted warehouse. One is that the direction is set too early. At this time, it is necessary to turn around once and then continue to invert. The vehicle body will turn around again in time to make the wheels return to the straight direction, and then enter the warehouse steadily. It can be fine-tuned after being put in the warehouse; the second is that the direction is set late, and the body needs to be timing at this time, but it still does not return to the direction, and it can be returned after the distance is almost the same; the third is that the body is fine-tuned and repaired after being put in the warehouse. The text is not as intuitive and easy to understand as the video. This thing is sold on Taobao. I have used it once before. There is a video teaching slow-motion skills. It is very practical. It only costs 20 yuan. You can try it. You can directly search on Taobao: Video tutorial on how to correct the direction when reversing into the warehouse (essence of skills). Ask for high scores! If you have a car, practice more. If you don’t have a car, watch more teaching videos, and then memorize the formulas taught by the instructor to become proficient. It's easy to pass~~
How to correct the direction when reversing into the garage? How to correct the direction of a collapsed warehouse? How do you fix the direction of a dumped warehouse?
Reversing into the garage
Right-side reverse into the garage 1. Engage the reverse gear and slowly release the clutch pedal so that the vehicle starts to reverse in a semi-linked state. Look at the right rear window. When the right rear The 3ccc mark on the window corner glass coincides with the right line of the garage, and the steering wheel is immediately turned to the right at a constant speed. 2. Look at the left rearview mirror. When you see the intersection of the left line and the bottom line of the garage just appear, turn the steering wheel back to the right direction immediately. Observe the rearview mirrors on both sides to adjust the vehicle body and pour it into the garage. 3. After backing into the garage, look at the left rearview mirror. Stop when the lower edge of the left rearview mirror coincides with the front edge of the garage. Backing into the garage is completed. 4. When exiting the garage, shift into first gear and slowly release the clutch pedal so that the vehicle is in semi-linkage. Start moving forward. When the curb line is no longer visible through the front hood (the rear wheels are just parallel to the exit line), turn the steering wheel full to the left. When the vehicle body is aligned, return the steering wheel to the straight direction. When the front wheels of the vehicle pass The left starting point is the sensor line (observe it on the car, stop when the sensor line reaches the left window pillar, just when the wheel is touching the line), stop the car.
Left Reverse 5. Engage reverse gear, slowly release the clutch pedal, so that the vehicle starts to reverse in a semi-linked state, look at the left rearview mirror, when the left starting point sensor line slightly passes the left rearview mirror Immediately turn the steering wheel full to the left. 6. After the steering wheel is fully turned to the left, with the clutch in a semi-linked state, observe the right rearview mirror at the same time. When you see the intersection of the right line of the garage and the bottom line from the right rearview mirror, immediately turn back to the straight direction. plate.
Observe the rearview mirrors on both sides to adjust the vehicle body and pour it into the garage. 7. After backing into the garage, look at the left rearview mirror. Stop the car when the lower edge of the left rearview mirror coincides with the front edge of the garage. Backing into the garage is completed. 8. When exiting the garage, shift into first gear and slowly release the clutch pedal so that the vehicle is in semi-linkage. Start moving forward. When the curb line is just out of sight through the front hood (the rear wheels are just parallel to the exit line), turn the steering wheel full to the right. When the vehicle body is aligned, return the steering wheel to the right direction (right side of the vehicle body at this time). (approximately half the distance from the front edge of the garage), when the front wheels of the vehicle pass the left starting point sensor line (observe from the car, stop when the sensor line reaches the left window pillar, just when the wheels touch the line), stop. All exams completed. Start reversing by reversing on the left side. When the lower left corner of the safety belt hook on the left side of the driver's seat coincides with the upper left corner of the garage, turn the wheel to the left and continue reversing. When there is a foot distance between the car body and the upper left corner, return to the normal direction and continue reversing. When the garage When the upper left corner of the garage coincides with the lower line of the left reversing mirror and is a little further away and the upper left corner of the garage cannot be seen at all, turn the wheel to the left to lock the vehicle body in the correct direction and reverse the vehicle into the garage. What you need to pay attention to when reversing into a garage is wheel speed coordination. Slow speed and fast steering are the key points. When reversing, you need to learn to observe the relationship between the car body and the parking line through the rearview mirror, be able to see the driving route in the rearview mirror, and fully meet the turning wheel. Many students don't know how to turn the steering wheel when reversing. They think that when reversing, the steering wheel should be turned in the opposite direction (turn left if you want to go right, turn right if you want to go left). This is a wrong concept. In fact, when reversing, looking at the rearview mirror, the rear of the car becomes the front of the car. If you want the rear of the car to go left, you should turn to the left; if you want the rear of the car to go to the right, you should turn to the right. The rearview mirror observes the relationship between the body extension and the garage edge line. The same applies to the left and right rearview mirrors. For example, if the left rearview mirror observes that the body extension line is close to the garage edge line, then turn to the right so that the rear of the car will be far away from the library edge. On the contrary, if the extension line of the car body is far away from the side line of the garage, turn to the left, and the rear of the car will be close to the side line of the garage. Tip: Right to the garage: Shift the clutch to the reverse gear, slowly release the clutch, press, press, press to find overlap (the 3ccc mark on the glass in the right rear window corner coincides with the right line of the garage), press to find overlap, overlap and turn to the full wheel to the right . Press and hold to look at the left rearview mirror, press and hold to find the overlap (the intersection point between the left side line of the garage and the bottom line coincides with the extension line of the left side of the car), and overlap to return to the positive wheel. Press and see the changes. If the angle is large, press it downwards. If the angle is small, press it upward. Press and hold to find overlap (the lower edge of the left rearview mirror coincides with the edge of the front of the garage), press to find overlap, and park by overlap. Departure: Put the clutch in first gear, slowly release the clutch, press it, press it, press it to find the coincidence (the front hood coincides with the roadside line), press it and turn the wheel to the left, press it to see the distance, press it to see the distance, Return the timing of the vehicle body to the positive wheels, press it to find coincidence (the sensing line coincides with the left window pillar), and park the vehicle in coincidence. Left reverse: Put the clutch in reverse gear, slowly release the clutch, press it, press it, press it to find overlap (the left starting point sensor line coincides with the lower edge of the left rearview mirror), press it to find overlap, and press it to the left to complete the wheel. Press and hold to look at the right rearview mirror, press and hold to find the coincidence (the intersection point of the right line of the garage and the bottom line coincides with the extension line of the right side of the car), and press to return to the positive wheel. Press and watch the changes, the angle...
How to find the right time to reverse the car and correct the direction when reversing into the garage without a lever
Hello, The speed of the car is completely controllable. If you can't grasp the timing of steering, then you must practice controlling the speed of the car and adjust the reversing mirror to the best position for observing the rear and right side of the car. These are all You need to familiarize yourself with and practice it, because others can only teach you how to drive but cannot help you drive.
After adjusting the rearview mirrors on both sides, slowly practice the low-speed half-clutch state. I believe you can control it. If it is too fast, press the clutch a little more and press the brake pedal slowly. Remember Let people control the car, and don't let the car control the owner. That would be putting the cart before the horse.
Driving is a skilled job, don’t rush for success, take your time to find the feeling, be diligent in making frequent contacts, and nothing will be a problem!
Finally, I wish you good luck.
How to correct the direction when driving into the warehouse
First of all, you need to know that the body of the rearview mirror is not parallel, and the rear wheels will bulge out a little because of the bumper, so you should pay attention to yourself Correction,
Also, when looking at the reversing mirror, if you turn the steering wheel to the left, the rear of the car will turn to the left and to the right. The same is true,
I will also post my reversing experience for you< /p>
The simplest method of reversing into a parking lot is to lock the steering wheel when the front wheel of the vehicle exits the dotted line. Pay attention to the left dotted line and notice that the front wheel will lock the steering wheel as soon as it exits the dotted line. (In fact, that The dotted line is the preset steering dotted line for the driver)
What I usually do is: drive into the reversing parking area, and then park when the front wheels are not far beyond the dotted line (don't go too far). Then reverse the car, turn your head to look at the point behind, and then hit the direction almost immediately (because the wheel is not far beyond the dotted line, even if you can't see the point behind, you can hit the direction after about a while)
Or you can just look at the dotted line without looking at the rear points. But generally I don’t recommend this. After all, this is reversing, and you still need to use the rear as a reference. The dotted line is a reference standard.
Another little trick is that it is easy to overturn after reversing in. You can pay attention to parking when the rear garage line is tangent to the highest point of the rear wheel, so that you can park perfectly in the middle. (Of course, this standard varies from car to car, you can get out of the car and find it yourself. (a reference line.)
Correction techniques for reversing into a warehouse. How to adjust the direction when reversing
You must lean to the right when entering the warehouse. The sooner you can find the corner of the warehouse when looking at the reversing mirror, the easier it will be to adjust. , you can see for yourself that the optimal distance between the car body and the edge of the garage is 30 centimeters. At this time, when returning to the direction and reversing into the garage, you need to pay attention to the wheel speed coordination. The key points are slow speed and fast steering. When reversing, you need to learn to observe the relationship between the car body and the parking line through the rearview mirror, be able to see the driving route in the rearview mirror, and fully meet the turning wheel.
In fact, when reversing, looking at the rearview mirror, the rear of the car becomes the front of the car. If you want the rear of the car to go to the left, you should turn to the left. If you want the rear of the car to go to the right, then you should turn. Turn right.
The rearview mirror observes the relationship between the body extension and the garage edge line. The same applies to the left and right rearview mirrors. For example, if you observe the left rearview mirror and see that the body extension line is closer to the garage edge line, then move towards it. Turn right so the rear of the car is away from the edge of the library. On the contrary, if the extension line of the car body is far away from the side line of the garage, turn to the left, and the rear of the car will be close to the side line of the garage.
How to correct the direction when reversing into the garage?
This is the case. If the steering wheel is turned early, it can be corrected, but if it is turned late, it will not work. Our master taught us to correct the steering wheel whichever side is wider. If you are early in the morning, it is wider on the left, so fix a little to the left. When you see that the car can be put into the warehouse, hit the right side until the car body is parallel to the line. When the time comes, get back on track.