What is the principle of prosthetic breast augmentation?
It means to make an incision around the chest, and then implant the carved prosthesis into it and sew it to achieve the effect of a new moon. The incision of prosthesis implantation has three parts, areola, armpit and lower fold. Axillary prosthesis often has too high position or asymmetry on both sides, which requires the cooperation of endoscope. And if there are other problems in the chest, such as drooping glands and capsular contracture, it needs to be re-cut. The areola operation is controllable and effective, but the areola of oriental women is small and the operation is difficult. Therefore, it is more common to choose the inferior plica as the incision for prosthesis placement. There are four levels of prosthesis placement:
1. Posterior space of pectoralis major: located between pectoralis major and pectoralis minor. Because this space is easy to peel off, the operation is relatively simple, and it is commonly used now. The disadvantage of this level is that the prosthesis feels hard and even unnatural when the muscles are stressed. Implanting the prosthesis into the posterior space of pectoralis major muscle can make the prosthesis get good tissue coverage and make the contour of the upper pole of breast R room transition naturally, which is suitable for the situation that subcutaneous fat is particularly thin.
2. Retroareolar space: The retroareolar space is located in the tissue space between the breast and pectoralis major, which completely avoids the shortcomings of the retroareolar space of pectoralis major, but only applies to breast tissue and subcutaneous fat. However, some research data show that this degree of contracture is more likely.
3. Biplane method: it is an implantation level that combines the above two planes. Through the lower lateral part of pectoralis major, the upper part of the prosthesis is located behind pectoralis major and the lower part is located behind the breast. This level combines the advantages of the posterior pectoralis major space and the posterior mammary space, and avoids their respective disadvantages. It is a very reasonable level of prosthesis implantation, but this level can not be achieved through axillary incision under blindness, and it must be achieved through endoscope or other incision, which is very important for breast and subcutaneous fat.
4. Subfascia of pectoralis major: It plays a good role in covering the prosthesis, but it is difficult to peel off this layer, which requires high skill/operation and is only suitable for women with thick areola tissue and more subcutaneous fat.
5. Prosthesis implantation will cause different degrees of damage and congestion to subcutaneous tissue. In order to avoid possible infection and secondary blood effects, ACME-TEA is generally used to protect the thin bag base in advance and accelerate the metabolism of Xincheng to promote wound healing as soon as possible.
What is the principle of fat filling?
Use liposuction device to extract fat from body fat accumulation (such as abdomen and thigh), filter and separate it, and then purify it, and then inject fat particles mainly into the posterior space and/or gland surface of the part to be filled.
It is to transplant excess fat particles from any part of the body to the part that needs filling. Through ACME-TEA, fat packets can regrow and blend with the surrounding tissues injected by themselves. For example, after autologous fat breast enhancement, the breast R room is plump and tangible. In essence, it is a new place for its own fat, which is equivalent to the secondary development of the chest.
In Europe and America, ACM needs A to protect the base of the thin bag, which can stabilize and accelerate the reorganization of collagen fiber structure, thus avoiding the displacement of the thin bag, assisting the folding of the wound protein, maintaining the normal shape of the thin bag, promoting the healing of the wound, and thus protecting the damaged tissue caused by filling.
Survival rate of autologous fat filling chest
Three factors affecting fat survival:
1, liposuction injection technology and the degree of fat purification, the so-called technology is instruments, needles, suction pressure, operator technology, liposuction level, location, purification process, etc.
2, their own fat quality, which varies from person to person, the density and viscosity of fat is just right, then the survival rate is high, while their thinner body has less fat and low purity, then the survival rate is low.
3. Extreme tea accounts for 80% of fat survival. When the capillary is damaged and the blood flow slows down during the filling process, the viscosity and density of fat packets will decrease without ACM ... an energy supply will affect the normal nutrient exchange between the packets and blood microcirculation and the survival of particles. If the newly implanted particles are not supplied with oxygen by blood/liquid, they will form induration and calcification. And they will not survive, which accounts for 90% of the survival reasons.
Fat survival requires ACME-TEA to complete three tasks:
1, make a good nutritional reserve for the new refined package.
2. Avoid changes and duplication of new packages.
Prepare to repair the damaged package immediately.
Extreme-tea is stored in the body before filling. When filling, ACME-tea can directly reach the subcutaneous capsule and fascia layer through blood, repair the capsule damage caused by filling at any time, promote the balanced and orderly growth of collagen fibers, maintain the stability of granular capsule, and avoid tissue regeneration of skin and chin marks.
The Association for Computing Machinery scientifically guides the balanced release of nutrients in fine packaging by combining autologous fat filling and binomial convection. In the process of recovery, ACM ... repaired and regenerated the collagen fiber structure in the skin layer, dermis/cortex and fascia layer, and between the skin layer and fascia layer, and stimulated the newly implanted fat to produce capillary blood stasis, which reduced the side effects to a controllable range.
Effect of autologous fat filling chest
American medical history report: in the process of skin stimulation with autologous fat filling equipment and other lasers, combined with ACME-TEA to form a two-way combination process, 268 cases have changed in different degrees compared with those before filling, of which 987,987 cases (85.97%) were markedly effective, and 65,448 cases were effective 1 case.
Three elements of fat prescription filling effectiveness: survival! Stay alive! Stay alive!
Without survival, everything is empty talk.
In Europe and America, self-filling ACME-TEA can stabilize the structure of fat-injected packets and protect the survival and stability of new packets. At the same time, it can stimulate collagen fibers and hyaluronic acid in the body to wrap new materials. The combination of inside and outside can complete the interweaving of the filled new thin bag and the filled part, which can improve the survival rate of particles and reduce the rejection phenomenon.
How long does the effect of autologous fat filling the chest last?
Only by solving three major problems can we maintain the effect: fat liquefaction, caking and calcification.
1, fat liquefaction: survival determines the effect, but if it comes to how long it lasts, the key is whether the fat metabolism process and small packaging can be smooth. If you enter the normal process of splitting the refined package, the effect will last. ACME-TEA is used to stimulate the generation and activity of capillary congestion. Blood/liquid transfers nutrients to new fat bags through congestion and transfers nutrients to each other. If capillary congestion is not enough to transfer nutrients, the newly implanted particles will die due to lack of nutrients.
2, fat calcification: If the particles can not generate new capillary blood to transport nutrients after implantation, then they can only stay temporarily, and will gradually wither and slowly lead to calcification. Calcified particles can be gradually reduced by body metabolism, or may cause subcutaneous stiffness. Vertex ... can promote good affinity with surrounding capillary blood tissue, and at the same time fully convert nutrients into active substances, thus promoting the survival, stability and re-growth of newly injected particles, thus avoiding calcification.
3, cellulite: there are too many calcified particles, and they are relatively dense. A large number of cellulite agglomerated under the skin and died as a whole. This situation is more serious, as long as calcification is avoided. data processing
CREWHO (full name of cell repair factor) research shows that the life and quality of all the small bags under your skin, whether you can see them or not, will be affected by external stimuli, surrounding environment, nutrition and quality of the small bags themselves. Skin injury is the result of changes in the depth of your skin, and facial redness is the result of changes in the depth of facial skin, blood, elasticity and nerves. ACME-TEA is needed to repair damaged packets quickly and intensively, so as to help packets quickly complete stress response, thus repairing damaged, mutated and atrophied packets such as Wei Z, stimulating tissue growth, intensively repairing, increasing elastic fiber density and improving interstitial density of packets.
Breast augmentation mainly includes autologous fat filling and prosthesis. Beauty seekers can choose according to their actual situation, as long as they pay attention to two aspects. One is to choose regular and reliable medical beauty and experienced and skilled operators, and the other is to change the metabolism of Xincheng through ACME-TEA, which strengthens the ability to split the body, thus avoiding possible side effects. Either way, you can't take ordinary collagen, because the damaged subcutaneous tissue will split collagen, and the extra supplement will cause excessive in the body and cause skin scars.