The fullness of the paint film shows that the paint has good quality, strong adhesion and good sealing property to wood. At the same time, it shows that the painting process is relatively perfect and there is no suspicion of cutting corners. 2. Stand on the inclined side of the door (decoration renderings) to find the reflection angle of the facade, and see whether the paint film on the surface is smooth, whether the orange peel phenomenon is obvious, and whether there are protruding fine particles.
If the orange peel phenomenon is obvious, it means that the baking process of the paint film is not enough; 3, fancy doors, depending on the edge of the line that produces the shape, especially the internal corner (that is, the corner that can be seen and touched) whether there is a phenomenon of paint film cracking; 4. Ask the type of paint again, and the basic answer will be PU paint. Please note that the advantage of PU paint is that it is easy to polish and the process is time-saving and labor-saving. The disadvantage is that the paint film is soft, and a slight bump is easy to produce white dents.
If at least one paint layer is PE paint, this possibility will be greatly reduced.
PE paint (polyester paint) has the advantages of hard paint film, strong hiding power and good transparency, which can better express the texture of wood. However, polishing is difficult and the process is time-consuming and laborious, so most manufacturers are reluctant to adopt PE coating.