1, feet

Prepare an ordinary ruler or soft ruler, measure the width and circumference of the widest part of the palm, and then refer to the comparison table to get the bracelet ring size that suits you. If the length is below 70mm, the diameter of the ring mouth below 53mm is generally selected; The length is 70-76 mm, and the diameter of the ring mouth is 54-56 mm; The length is 76-82 mm, and the diameter of the ring mouth is 57-59 mm; When the length is above 82 mm, the diameter of the ring mouth is above 60 mm. ..

2. Compass measurement

Prepare cardboard and compasses, draw a bracelet-like circle on cardboard with compasses, and then cut it out with scissors or a knife. By trying on the circular cardboard, you can find the ring that is most suitable for you to wear. Finally, measure the diameter of the internal hollowing out to get the appropriate bracelet ring diameter.

Step 3 test the old bracelet

If you have bought a bracelet before, you can directly measure the inner diameter of the old bracelet with a ruler. On this basis, you can slightly adjust the size of the bracelet. If you like to wear loose bracelets, you can choose a larger ring diameter of 1-2mm, otherwise you can choose a smaller size of 1-2mm.

Matters needing attention

When actually measuring, you can naturally put your hand flat, not too tight. Use a line to enclose the widest part of the palm and the thinnest part of the wrist. When measuring, if the hand is soft, it can be measured tightly, and if the hand bone is hard, it can only be measured by tightening the line. Finally, the length of the line is the size of your hand.