Bundle pockets vary, single-layer, double-layer, patchwork, simple backpack.

I'm doing a tutorial this time. It's not difficult. There are tablecloths and interlining.

Go to the finished product drawing first.

First steps:

A: The materials are as follows. There are two ropes that I forgot to shoot together. Each rope is about 45 cm long.

(a) The dimensions of fabric and lining are 7cm*52cm. This is the net size, that is, the size in the line drawing. The cut cloth is about 9cm*54cm.

B: Two small pieces of cloth are where the drawstring is put. The net size is 5cm*3cm. As mentioned above, leave a seam when cutting, which is about 7cm*5cm).

B: You can also skip this step. I like to iron a thin lining before cutting cloth, so that the cloth surface is smoother and less prone to thinning.

C: Sew up the two sides of the small piece of cloth, as shown below (it is easy to make the edges thinner because of frequent friction when it is pulled out, so fold it up and sew).

D: After sewing, I fold it in half according to the drawn lines, and then iron it and set it.

E: Look at the picture below. Pay attention to the direction. Fix small pieces of cloth at both ends of the face cloth, and the distance between the two sides is equal. For them, the open ends face outward.

F: pay attention to the direction. You see, it faces like this. The picture below is enlarged and can be seen clearly. You can also fix the position directly with a line.

G: Then put on the lining. Remember, they are opposites, just like hamburgers. I specially opened the picture below to take pictures. Both ends are the same.

H: The two sides are aligned as follows. Fix with a bead needle or sew with thread. Then sew the two ends together and sew them according to the line.

I: Turn it over after sewing, and the front looks like the picture below.

J: After finishing the modeling, arrange the bags as shown below. Remember to align the drawstring cloth, pour it in one direction, and then fix it with a bead needle or thread.

K: After completion, as shown in the figure below, at this time, both sides are wound and sewn. My lining is light goose yellow, and at the end of the sewing road, a seam is left on the lining as a back seam.

L: That's right. Leave a small hole, but it's not small. It's not good if the whole tolerance can't be turned over. ?

M: Turn the whole bag over in front of the driveway from the back entrance, as shown in the figure below, and then fix the stitching on the back of the face cloth and the stitching on the back of the bottom inner cloth, just like the hidden line in the lower right corner of the figure below.

N: The seams on the back of the face cloth and the lining cloth can be stitched more points, which is convenient for the finished product to turn over, because this size package is relatively narrow and belongs to the experience. If you don't want to sew, you can use it twice, and you will understand. ...

Then hide the stitches, as shown below.

O: Turn in front of the driveway and straighten the shape. It's a little wrinkled now. .

Then put on a rope and tie a knot.

The color of the pen is soaked in water, then dried, and then shaped with an iron.

You can try to make different sizes, and the tablecloth can be patchwork. See more and try more.

Remember to like it if you like it!