Gray shelves and full shelves are used for plastering.

Concrete tamping frame.

3.6M and above sets of outer shelves, the calculation method is the length of the outer wall sideline multiplied by the height of the outer wall (in square meters). The height of external wall refers to the height from outdoor design terrace to cornice. For shelves below 3.6M, the calculation method is the net length of the inner wall multiplied by the net height of the inner wall, and the unit is square meters.

The outer shelf includes a plastering scaffold, and the other wall can be used to calculate the plastering scaffold.

If the indoor plastering height is less than 3.6M, the wall shall be plastered with grey frame: the calculation method is: the net length of the wall multiplied by the height from the floor to the bottom of the floor in square meters; Plastering single beam: the calculation method is the net length of the beam multiplied by the height from the terrace to the top of the beam, in square meters; Column plastering: The calculation method is to multiply the column height by the peripheral perimeter of the column structure plus 3.6M.

Indoor plastering height above 3.6M means full shelves, that is, full scaffolding. There is no need to calculate gray shelves. Its calculation method is based on the indoor net area, without deducting the area occupied by columns, stacks and attached chimneys.

The calculation method of concrete scaffolding is to multiply the corresponding quota of full-house scaffolding by a coefficient of 0.3.

Thank you, for reference only! !