For shaft parts with pin holes at both ends: put the shaft parts on the deflectometer and press the measuring rod of the dial indicator on the shaft to be measured, so that the coaxiality and verticality of the rotating shaft can be detected.

Usage: This instrument is mainly used to detect the radial, circumferential and end-face runout of shafts and disks. The product is novel in design, elegant in appearance, high in precision and extremely convenient to operate.

Main technical parameters of deflection tester:

1, the radial circular runout of the 60-degree conical surface of Mohs No.2 center is ≤ 0.005 mm

2. The parallelism (horizontal and vertical direction) between the vertex axis and the guide rail is within the range of100 mm ≤ 0.006 mm.

3. The maximum diameter of the tested part is 270mm-460mm.

4. The measuring lengths are 300mm, 500mm,1000mm and1500mm.