It is a thing that many car owners have to do, but some car owners want to buy their own car film stickers, but they don't know how to paste them. Let's take a look at the correct method of car film.

Before filming the car, the window should be measured first, and the film should be cut according to the measured size.

Scrub the window glass, thoroughly remove the dirt on the glass, and then clean the water.

Tear off the film when pasting, spray water evenly on the effective film surface, and then stick it on the car glass for fixing.

In order to reduce bubbles, it is necessary to smooth the film from the middle of the glass to both sides with water.

Bake and shape with a hot air gun. Control the temperature when drying the film, not too high.

Finally, the film should be peeled off, sprayed with installation liquid and scraped flat with a scraper. If there are small bubbles, they can be smoothed by wet baking. When uncovering the film, only one half can be uncovered at a time, and the other half can be uncovered after spraying installation liquid for fixation.