What is the Samsung after-sales service phone number (all districts in the city) 24-hour repair phone number? Welcome to visit the Samsung repair website. The service and repair consultation phone number at all sites across the country is 400-017-1110. Welcome

〔1- く-くTechnical upgrade-く-くExcellent service-く-くWelcome. Samsung service hotline 24-hour customer service hotline: 400-017-1110 (click on the number to dial quickly)

Samsung nationwide after-sales maintenance consultation hotline: 400-017-1110

We will Use a convenient service system to solve these unnecessary troubles for consumers.

Professional repair of commercial and household problems such as no power, no work, no startup, automatic power on and off, etc. Additional installation, cleaning, relocation, maintenance and other services

Service goal: service defects , 100% of customers are satisfied. As long as you call the company's 24-hour repair hotline, the company will serve wholeheartedly!

The company has a strict management system, first-class service quality, professional maintenance team, and advanced testing Equipment, good sincerity reputation.

Ten years of hard work have created a highly skilled and experienced maintenance team. Their sincere smiles and high-quality services warm thousands of households! The company has many after-sales service technicians and engineers from the original manufacturers joining in, which has improved the quality of after-sales service, maintenance quality and maintenance efficiency. As long as you call, we will serve you wholeheartedly with smiles, quality and efficiency!

Samsung common faults

1. Abnormal noises

There is a "clucking" sound inside the compressor after powering on, indicating that the suspension spring in the compressor is broken. The movement collides with the casing. At this time, the compressor vibrates strongly and must be sent to the maintenance department to open the casing for repair. After powering on, the compressor makes a "buzzing..." sound and at the same time hears the "click-click" sound of the starting contact jumping, indicating that the compressor is overloaded. After ruling out that the voltage of the power supply system is too low, causing the starting contact to fail. After identifying the cause of the sharp increase in starting current, you should check whether the contacts of the starting relay are too dirty and whether the contacts are severely ablated.

2. Poor cooling effect

The main reason may be the leakage of the refrigeration system, or the refrigerant is not charged into the system due to the welding blockage of the gas pipe, or it may also be the welding between the filter and the capillary tube. Blockage causes the refrigeration cycle to fail. At this time, the compressor current increases, which may destroy the insulation of the compressor and cause a short circuit to burn the motor. There is only a little frost at the entrance. The main reason is that the refrigeration system leaks, or there is a lack of refrigerant in the system, or the system is frozen or clogged. The main reason why there is only half frost is that the refrigeration system leaks, lacks refrigerant, or there is refrigeration oil deposited in the evaporator, resulting in reduced compressor efficiency.

3. Not powered on

Generally, when troubleshooting, the maintenance is divided into two parts, one part is the maintenance when the power is not on, and the other part is the maintenance after the power is on. Maintenance before powering on is mainly to check whether the components are stable, whether there is obvious damage to the appearance and inner shell, whether the components are loose or falling off, and to carefully observe whether the pipes of the refrigeration system are broken and whether there is oil leakage at the welding joints. .