1. First, open the engine cover and find the adjustment button for adjusting the headlight angle at the position of the headlight lamp holder. Plastic hexagonal design is usually adopted, which can be adjusted by using a hexagonal wrench with corresponding caliber. Some models also use a cross or flat screwdriver for adjustment.

2. Left headlight: adjust the low beam (high clockwise and low counterclockwise); Turn the high beam left and right (clockwise to the right and counterclockwise to the left).

3. Then, adjust the height. The height of the lamp does not need to be accurate to centimeters. The principle of adjustment is to maximize the performance of lighting without affecting other vehicles and pedestrians. The easiest way to adjust is to keep it level.

Find a wall on the sidewalk and borrow a reference. For example, taking an ordinary car as a reference, if the license plate of the front car is installed in the trunk instead of the rear bumper, when the distance between cars exceeds two meters, the lights of the headlights will light up.

You shouldn't photograph each other's license plates. The upper edge of the low beam lamp is just the same as the upper edge of the car wheel, and it is also a relatively standard lamp height.