Cutting and welding the trunk is a major accident and needs cutting and welding. Generally, it is because the chassis of the spare tire is severely deformed and the girder is damaged, which requires cutting and welding. First cut off the back plate, then straighten the girder and the spare tire chassis, and finally weld a new back plate. Although these cutting and welding will not affect the mobility of the vehicle, it belongs to the accident vehicle because it has been cut and welded.
Determine the condition of the accident vehicle:
1, the engine compartment and cockpit were damaged after the vehicle was hit;
2. The impact damage area of the rear fender of the car body exceeds one third of the vehicle;
3. The longitudinal beam has vehicles that are welded, cut, reshaped and deformed;
4. The shock absorber seat has welded, cut, reshaped and deformed vehicles;
5. The ABC column of the vehicle is welded, cut, reshaped and deformed;
6. The airbag of the vehicle pops up due to impact;
7. Vehicles with non-detachable parts welded, cut, reshaped and severely deformed;
8. Half of the body is immersed in water or water enters the cockpit of the vehicle;
9, the car body area of 0.5 square meters or more was damaged by fire, and there are still hidden dangers after repair.