The first is to do it seriously.

What was the original car like? You must make it what it is now. Don't say it's too difficult, at least let the layman see it.

The second is trachoma sandpaper marks. Don't worry, be sure to pay attention to them, or it will be very troublesome when drawing.

The third is the preparation of painting. Oil and dust removal must be done well.

It is important to pay attention to dust removal and oil removal before painting. Rag for dust removal, gasoline for oil removal and dust removal agent.

The sector of the spray gun does not need to be adjusted most of the time when painting.

I'm glad the air pressure hasn't risen.

Depending on the situation, the air pressure of the air gun is adjusted too much when spraying the top coat, which is easy to spray dry and wastes the paint.

If you run out of oil, orange stripes will waste paint.

If you are a novice, the air pressure of the top coat should not be too high, but it should be fully atomized.

Don't move the gun too slowly, just hurry up.

Don't adjust the varnish too thick, but adjust it slightly thinner in proportion. Take the gun away. When spraying, the air pressure is greater than the top coat. If the size is moderate, it should be closed as soon as possible.