Clothing ironing The necessary process after washing clothes, whether it is water washing or dry cleaning, must be ironed before reaching the standard of delivery to customers, especially the washed clothes need ironing, so ironing equipment is the key. So, what ironing facilities are there in the dry cleaners?

First, the ironing table

Ironing table is one of the most important equipment in dry cleaners. Generally speaking, ironing tables are divided into the following three types in form:

1. square table: a rectangular table with a fan under it, which makes the table form negative pressure and achieve the purpose of cooling. Square table is mainly used for ironing clothes with large area, with high ironing quality and high working efficiency, but it is not suitable for ironing clothes with complex structure and curved shape.

2. Punching table: its front end is semi-circular with different widths, which is suitable for ironing clothes and skirts with curved shapes and complicated structures.

3. Multifunctional drum steam absorption ironing table: It is a multifunctional ironing table with steam absorption, blowing and spraying functions. Firstly, the clothing fiber is softened and shaped by injecting steam, and then the clothing is shaped by absorbing wind. The ironing table is suitable for ironing suede clothes and can also be used with ironing board.

Second, iron.

Iron is the main tool for manual ironing, and it is also the source of temperature during ironing. The types of irons are as follows.

1. Electric iron: It is a traditional ironing tool. There are two kinds of irons, one is the direct heating type, the temperature is controlled by the operator's will, and the power supply is switched on and off at any time according to the required temperature. This kind of iron is rare.

2. Pure steam iron: It is an iron widely used in the laundry industry at present. Because this kind of iron is safer and less prone to ironing accidents, pure steam iron can generally cope with ordinary clothes. But when it comes to pure natural fibers, pure steam irons are quite inferior.

3. Mixed iron with electricity and steam: It has both advantages of electric iron and steam iron, and is the future development direction. Iron has a wide range of applications, which can be used for both chemical fiber blended fabrics and natural fiber fabrics.

Third, the sleeve bone

The sleeve bone is an accessory on the punching ironing table. It is a small perforated plate, which is a special tool for ironing sleeves.

Fourth, the shoulder seat

Commonly known as "steamed bread", it is an essential tool for ironing the upper sleeve mountain. Shaped like a flat peanut, it has two arcs the same as the sleeve mountain, and the middle part is tied at the waist for hand pulling.

Verb (abbreviation of verb) dry cloth

Dry cloth is a necessary thing to press on the cloth when ironing the front of clothes to prevent the iron from rubbing the cloth directly to produce light. The requirement for dry cloth is to use pure cotton, plain white and plain cloth. Do not use chemical fiber blended materials.