Installation process requirements of plastic gusset ceiling
1, when fixed with nails, the nail spacing should not be greater than 200mm, and the plastic gusset plates should be spliced neatly and straight without color difference, deformation and stains.
2, wooden keel ceiling (not less than 25mm*30mm, (rules. Meet the technological requirements of paper gypsum wood keel.
3, panel and metope, curtain box, lamps and lanterns should be tight, can not have leakage phenomenon, light lamps and lanterns (and exhaust fan) should be closely connected with the keel, heavy lamps and lanterns or ceiling fans, shall not be connected with the ceiling keel, should be set on the floor.
Installation steps of plastic gusset ceiling
1. Determine the size of the ceiling. If you are not sure about the measurement yourself, you should ask a professional to do it. This step is very important in the installation process of plastic gusset ceiling, and the material selection and installation in the future should be based on this size.
2. According to the same horizontal height, install corner assembly series, and hoist light steel keels (38 or 50 keels) at appropriate intervals, with a general interval of 1- 1.2m, and the spacing of suspenders shall be distributed according to the regulations of light steel keels.
3. Place the pre-installed pendant on the plastic gusset plate keel, which clings to the light steel keel and is vertically buckled under the light steel keel. The keel spacing of plastic gusset plates is generally 1 m, and the elevation of all pieces must be adjusted after installation (generally, when the vertical distance between the building and the aluminum plate to be hung is less than 600mm, there is no need to add 38 or 50 keels in the middle, and the keel hanger is directly connected with the derrick).
4. Fasten the plastic gusset plates on the supporting keel in parallel and in turn, and connect them with special keel series connectors when connecting the plastic gusset plates. Gloves must be worn when installing the circuit board. If you accidentally leave fingerprints or stains, you can clean them with detergent and boiling water and dry them. Good installation process is convenient for disassembly.
The knowledge of the technological requirements and installation steps of the plastic gusset ceiling keel is introduced here. When the ceiling at home needs to use plastic gusset ceiling keel, it is best to ask a professional master to build the design at home, so as to ensure better results.