2. Inlet bushing: the passage for plastic to enter the mold.
3. Upper fixing plate: female die can be fixed on the molding machine.
4. Mother template: on the fixed side of the mold.
5. Female core: die core embedded in the female template to facilitate the molding of plastic parts.
6. On the positioning block: it is installed on the female template, so that the positioning devices of the female template and the male template can be used together with the lower part of the positioning block.
7. Pull the slider: pull the slider to abdicate and press the sliding surface device hard.
8. Pressing plate: a device for forming a slider groove.
9. Guide post: the guide and positioning device for the male template and the female template.
10. Slider: a sliding device for handling the finished hook.
1 1. Finished product: a plastic part composed of a female mold core and a male mold core.
12. Setting pin: used to position the ejector plate.
13. Below the positioning block: it is installed on the male template to facilitate the positioning device of the female template and the male template and cooperate with the positioning block.
14. Chute: make the finished product form an inverted hook for easy separation.
15. Die foot: used to control the stroke of thimble and oblique pin.
16. Lower fixing plate: to fix the male part on the molding machine.
17. Core: die core inserted into the core template to facilitate the molding of plastic parts.
18. Male mold: The movable side of the mold is usually designed to make the product easy to eject.
19. Upper ejector plate: it plays a return role in the control of ejector and hard gate.
20. Lower ejector plate: it plays a role in positioning the ejector pin and the main runner.
2 1. Support column: located behind the bearing plate, used to reinforce the bearing plate and prevent deformation.
Functions of some components:
1. locating ring: a tool to align the mold feed joint with the machine nozzle during mold installation.
2. The part where the machine nozzle is connected with the main runner of the mold.
3. Master template: the plate bearing the core of the master template.
4. Auxiliary plate of master mold: the plate that assists the core of master mold.
5. Guide post: a part that is positioned in coordination with the master mold.
6. Guide sleeve: a part matched with the guide technology of the punch, which is used to align the punch and the die.
7. Punch template: the plate bearing the punch core.
8. Punch auxiliary plate: the plate that assists the punch to fix the punch core.
9. Punch support plate: Support the punch plate and the bottom plate so that there is a space between them for the ejector plate to move.
Move it.
10. Punch base plate: a plate that fixes the punch on the machine, which is integrated with the punch.
1 1. ejector pin: the demoulded part of the product.
12. Yin and Yang cores: the part of the molding surface.
13. Eject the locating lock: move the guide pin after the project is analyzed.
14. Spring: reposition the ejector plate or template.
15. Ejection plate: Eject the plate up and down, fix the thimble, and push the thimble forward when stressed.