1. The magnetic steel filling machine should be well debugged, all parts should be coordinated, the mold should be well positioned, the magnetic steel disk with magnet should be well polished, the inserted magnetic strip should not be bent, and there should be no foreign matter blocking in the groove.

2. The magnet must be carefully handled and flattened (it can be molded by magnetic steel molding fixture equipment). All magnets should be aligned as much as possible and carefully placed in each magnetic steel plate. Be careful not to hurt your hand.

3. The feeding of magnetic poles cannot be reversed, and the magnetic poles of each slot should be separated. Operators need to know the magnetic poles, and they must not be wrong, otherwise there will be problems.

4. The insertion speed of the magnet should be controlled. Some products can be faster, while others need to be slower. It can be controlled by stepping or servo motor to ensure the accuracy of magnetic insertion.

5. The embedded and surface-mounted magnets (magnetic steel) should be aligned to meet the requirements of magnetic insertion, and there should be no damage or replacement.