CB = the middle back shoulder point to the middle back seam.

CF = center front shoulder point to front center seam.

HPS = higher shoulder, higher shoulder.

Shldr = shoulder.

AH = armhole armhole

Btm = bottom edge

Scan = Scan the circumference of the skirt, skirt, coat or jacket hem. A coat or coat, measured from the hem of the opening.

Open it and sweep it.

Flange = folded part

Yoke = suitable part

CB length: from collar seam to hem shoulder point to back center seam length: from collar seam to folded part.

CF length: CF collar to hem shoulder point to front center seam length: shoulder point to front center seam collar to fold part.

Shoulder seam: collar seam to armhole seam

Shoulder to shoulder: shoulder to shoulder.

Back crossing: 5 inches down HPS, and then 5 inches from armhole to armhole after crossing.

Crossing back: After crossing: Sewing in York.

Go through the front: 5 inches down HPS, then go through the front: 5 inches below shoulder height, and then armhole to armhole.

Chester: 1 "Below, straight chest: directly below the armhole 1 inch.

Imperial waist: @ Seam Imperial waist: @ seam (style)

Top Empire Sewing: Sewing waist along empire: Sewing along empire

Btm imperial seam: straight seam imperial waist: straight seam

Waist circumference: 7 inches under the armhole, straight through the waist circumference: 7 inches under the armhole.

Hip circumference: under the armhole 1 1 inch straight over the hip circumference: under the armhole 1 1 inch.

Sweep: straight through hem circumference: straight across

Sleeve length: cap seam to hem sleeve length: top seam to fold.

Short sleeve length: collar seam to hem short sleeve length: collar seam to folding part.

Sleeve length (stepless) Sleeve length (stepless)

Biceps: 1 "Lower sleeve straight across upper arm muscles: 1" Lower sleeve straight across.

Elbow: 9 inches under the arm, straight through the elbow: 9 inches under the armpit.

Cuff seam: straight span cuff seam: straight span

Sleeve opening: straight through the hem cuff: straight through the fold.

Short sleeve opening: straight-span hem short sleeve opening: straight-span to the folded part.

Front armhole: side seam to shoulder edge.

Back armhole: side seam to shoulder seam; back armhole: side seam to shoulder seam.

Armhole: always along the seam Armhole: full seam.

Front collar: from shoulder to shoulder.

Front collar: shldr seam to CF front collar: shoulder seam to shoulder front.

Front collar: SHLDR sewn to cf Empire: AlongEdge Front collar: shoulder sewn to shoulder forefoot midsole: edging

Back collar: From shoulder to shoulder along the edge of back collar.

Back collar: SHLDR sewn to CB Empire: AlongEdge back collar: shoulder seam to shoulder back middle emperor: along the border.

Total neckline: total neckline:

Total neckline closed shldr (front & back) shoulder total neckline (front and back)

latasuture

Waistband/tie length: (half) sewn to the end waistband/waistband length: (half) sewn to the end.

Belt/tie length: total circumference. End-to-end belt/belt length: the total circumference from end to end.

Belt length: rod to central hole/hole Belt length: grid central hole/hole

Belt/Tie Width Belt/Belt Width

Place the coil from the armpit ring position.

Pocket position from HPS shoulder height pocket position

Pocket position from CF edge shoulder point to front pocket position

Going to this website is helpful to you.

/measuringmanual.pdf