Second, the purpose and requirements of fabric and accessories inspection. According to the detailed phenomenon of short-length/short-length in the invoice, you should personally participate in the inventory, confirm the documentary of large goods, and be responsible for determining the delivery date of large goods. After the fabric enters the factory, you should count the quantity, check the appearance and internal quality, and make sure it meets the production requirements before putting it into use. Before mass production, technical preparations should be made, including the formulation of process list and sample clothes, and the sample clothes can not enter the next production process until they are confirmed by customers. Fabric is cut and sewn into semi-finished products. After some woven fabrics are made into semi-finished products, according to special technological requirements, post-finishing processing must be carried out, such as clothing washing, clothing sand washing, wrinkle effect treatment and so on. Finally, it is packaged and put into storage after passing the inspection. Check the noodles/accessories according to the unit consumption confirmed by customers, and report the specific data to the company in writing. If there is a shortage, it is necessary to replenish the goods in time and inform the customer. If there is any surplus, it should be reported to the customer and returned to the warehouse for storage after the bulk goods are completed, so as to save use and prevent waste. Because the quality of grey cloth is directly related to the quality and output of finished products, before cutting, it is necessary to check whether the quantity, size, density, batch number and linear density meet the requirements according to the cloth ingredient list for cutting, and check the grey cloth one by one according to the standards when checking the cloth. All kinds of defects that affect the quality of finished products, such as flowers, missing needles, holes, oil stains, etc., must be marked and recorded.
Controlling fabric quality is an important part of controlling finished product quality. Through the inspection and judgment of incoming fabrics, the genuine rate of clothing can be effectively improved. Fabric inspection includes appearance quality and internal quality. Externally, we mainly investigate whether the fabric is damaged, dyed, weaving defects, color difference, etc. Sand washed fabrics should also pay attention to whether there are sand washing defects such as sand marks, dead pleats and splits. Defects that affect the appearance should be marked during inspection and avoided during cutting. The inherent quality of fabric mainly includes shrinkage, color fastness and gram weight (mm, oz). When sampling, representative samples of different varieties and colors produced by different manufacturers should be cut for inspection to ensure the accuracy of the data. At the same time, the auxiliary materials entering the factory should also be inspected, such as the shrinkage of elastic band, the adhesion fastness of adhesive lining and the smoothness of zipper. Accessories that fail to meet the requirements shall not be put into production. Three. The main content of technical preparation After receiving the samples and original materials, make reasonable cardboard according to the technical requirements (refer to the original samples of the guests), and make records of various technological processes, and be responsible for the technical problems encountered in the production process. Arrange sample garment production according to the sample garment time stipulated by customers and factory department, and make good opportunities. When making sample clothes, if the process list is not clear, you should take the initiative to propose it to the merchandiser or the factory director, so that they can discuss it with the customer and not make their own decisions. Carefully review the information of the process sheet provided by the customer, sample the clothes, and clearly understand the customer's requirements, sizes, raw materials, ingredients, etc. It is convenient for workshop production when approving sample clothes for guests. It is suggested to simplify the sewing process. After the sample clothes are completed, compare the original clothes with the process sheet and send them after confirmation. According to the main board, adjust the board according to the size table and the shrinkage rate of the fabric. Introduce other sizes of plates, do a good job of sample review, and indicate the words, lines, embroidery, models, anyway, etc. On the sample. If the factory does not make samples in the early stage, it must arrange for it to make samples before production for confirmation, and notify the factory director and the factory technical department in writing of the inspection results. Under special circumstances, it must be submitted to the company or customers for confirmation, and it can only be put into production after rectification. After proofreading the template cut by the factory, the length of the template can be confirmed, and the unit consumption confirmation letter after detailed recording is signed by the person in charge of the factory to inform the start of cutting. Before mass production, technicians should first make technical preparations before mass production. Technical preparation includes three contents: the formulation of process list, the production of models and sample clothes. Technical preparation is an important means to ensure the smooth progress of mass production and the final product meets customer requirements.