A. The human body measurement steps are as follows:
(1) Take the waist circumference as the benchmark, and measure the seventh cervical vertebra upward as the back length.
(2) Based on the waist circumference, the crotch protruding point is measured downward as the crotch contour,
(3) measure the length of the garment downward based on the waist circumference,
(4) Based on the waist circumference, the armhole depth is 2-4cm under the armpit.
(5) Taking the waist circumference as the benchmark, and measuring the chest point upwards as the chest high point,
(6) measuring the distance between the anterior axillary points as the chest width,
(7) measuring the distance between the axillary points of the back as the width of the back,
(8) The included angle between the horizontal line passing through the neck side point and the diagonal line of the shoulder is the size of the shoulder drop,
(9) Through the intersection of the vertical line at the bust point and the horizontal line at the waistline, the distance to the body surface is waist province, of which 2/3 is waist province, and 1/3 is human body curve buffer.
(10) Through the intersection of the vertical line of the scapula point and the horizontal line of the waist line, the distance to the body surface is waist province.
(1 1) Through the intersection of the vertical line of the armpit point and the horizontal line of the waistline, the distance to the body surface is waist province.
(12) The distance from the intersection of the vertical line of the most prominent point of the back midline and the horizontal line of the waist to the body surface is waist province.
(13) The straight line from the waist line through the scapular point and the straight line from the waist line through the thoracic point intersect with the connecting line from the seventh cervical vertebra to the shoulder point, and the difference between the two straight lines is the size of the thoracic process.
B, sleeve measurement steps are as follows:
(1) Measure the sleeve fat on the arm through the armhole depth line on the human body.
(2) Take the sleeve fat line to the shoulder point as the sleeve height,
(3) measure the elbow length and sleeve length downward,
(4) Measure the cuff on the wrist.
C, clothing body drawing steps are as follows:
(1) Draw the horizontal waist line as 1/2 bust +5cm,
(2) Draw a vertical line 38cm upward from both ends of the waist line as the front and rear center line, and the endpoint connecting the two lines is the upper horizontal line.
(3) Draw a parallel line 15.5cm upward from the waist line as the armhole depth line.
(4) Draw a parallel line from the waist line down 18cm as the hip circumference line,
(5) Draw parallel lines 28cm down from the waist line as the lower horizontal line, and extend the front and rear center lines to intersect with the lower horizontal line.
(6) On the armhole depth line, a vertical line 17.5cm away from the rear centerline intersects with the upper horizontal line to form a rear wide line.
(7) On the armhole depth line, a vertical line from the front centerline 17cm intersects with the upper horizontal line to form a chest width line.
(8) Draw a vertical line downward at the armhole depth line 1/2, and the intersection point between the vertical line and the lower horizontal line is the auxiliary line for side seam.
(9) On the upper horizontal line, the vertical line 7.5cm away from the rear center line is a horizontal open collar, and the vertical line 2.6cm long is a vertical open collar.
(10) Measure the shoulder 1.3cm downward on the back width line, and take the cross shoulder 1.3cm as the shoulder point.
(1 1) The vertex and shoulder point connecting the vertical collar are the back shoulder diagonal line.
(12) Draw the back neckline arc,
(13) Complete the back armhole arc,
(14) back stitch and side stitch,
(15) Draw the rear parting line, leaving 3.5cm at the waist.
(16) Draw parallel lines 2 cm above the upper horizontal line and the armhole depth line and 1 cm below the lower horizontal line.
(17) Make a parallel line 2cm below the upper horizontal line as the shoulder line.
(18) Measure the neckline with a width of 7.5cm, and draw the diagonal of the front shoulder and the arc of the front armhole.
(19) On the waist line, 1 1cm is the bust point.
(20) transfer the chest savings to the armhole,
(2 1) Draw the front parting line, leaving 3cm at the waist.
(22) Draw a side seam, (23) Draw a door line 2 cm away from the front centerline, (
24) The hem of the front garment piece and the back garment piece is round,
D, sleeve drawing steps are as follows:
(1) Vertical two lines to determine the sleeve fat and sleeve height,
2) Determine the sleeve length, and the auxiliary line of the sleeve is the basic frame of the sleeve hill.
(3) The elbow line is longer than the waist line 1cm,
(4) The arm of a stationary human body leans forward by 6 degrees and backward by 4 degrees.
(5) vertically adjusting the height of the sleeve,
(6) Determine the printing point at the height of sleeve hill of 0.22,
(7) Draw the lending amount of the previous film and small sleeve,
(8) Draw a horizontal line with a length of 4.3cm,
(9) Draw the outline of Daxiu Mountain and small sleeve Mountain.
(10) Draw the tear in the front sleeve and smooth it out.
(1 1) drop 1.3cm, determine the diagonal of the cuff 13cm,
(12) Draw the broken seam of the sleeve with the size of the back piece and smooth it.
(13) Determine the button position of the cuff.