If you have a grindstone at home, you can also use it to sharpen scissors.
Put the two blades of scissors on the grindstone and grind them on both sides. After grinding, you will find that the scissors are much sharper. If you don't have a millstone at home, you can also grind it on a marble countertop.
Some domestic cooktops are decorated with marble. You can put a pair of scissors in the corner of the marble countertop and polish it. Don't worry about grinding, marble will be damaged.
Marble has been polished, and it is polished in the corner, and almost no trace can be seen. Furthermore, you can try cutting tin foil.
The method is very simple, that is, find a piece of tin foil, then fold the tin foil in half and then fold it in half to form a long strip. Hold scissors in one hand and carefully cut as many as possible from right to left, so that you can cut more knives.
After cutting, you will find that the scissors have become very sharp again. You don't have to use brand-new tin foil, old used tin foil can also be used.
If you can't find tin foil at home for a while, you can also try to use cans. The method is the same as cutting tin foil on it. Replacing tin foil with cans can achieve the same effect, that is, cans are harder than tin foil.
This is because the scissors will produce friction in the process of contact with tin foil and cans, and the friction will make the scissors sharper than before. At this time, cutting other things with scissors will be much faster than before.
The daily maintenance of kitchen scissors is also very important. Keep dry after using it on weekdays. Remember to dry it with a dry cloth and hang it up. If you see that the scissors are rusty, you must wash the rust immediately to avoid large-scale rust.
2. How to grind the barber scissors?
1, the same as usual household scissors. The millstone should be soaked in water for a period of time, and the soaking time depends on its dryness. At least it is better not to soak the millstone in water.
2. For safety and splash protection. You can put the millstone on an old cloth that is spread out. In this way, water droplets and splash caused by instability can be alleviated in the cloth.
3. First, hold the handle of the scissors with your right hand as shown in Figure 2, and lean the inclined plane of the scissors against the grindstone.
4. Then the left hand is naturally supported on the scissors. Pay attention to the posture of the left hand as shown in the figure. Three people or four fingers press on the scissors, and the thumb naturally opens to press the other piece of scissors. The purpose is to keep the scissors stable.
3. How to protect the scissors for haircut? What should I pay special attention to?
Tips to prolong the life of scissors and the time when scissors can help you make money:
1. Never open or close the scissors (empty scissors) in your hand, increase the unnecessary rubbing times of the scissors, the blade will become dull and unfavorable, and the scissors need to be polished. However, the more times of grinding and repairing, the faster the blade becomes thinner and the shorter the service life.
2. When cutting hair, the scissors can be easily and naturally opened and closed up and down, and there will never be a situation that fingers are hooked or pushed out to exert undue force on the scissors and increase the loss of the scissors.
3. Before cutting hair, clean the guest's hair to reduce the chance of scissors being contaminated by dust particles or hair products.
4. Pay attention to the storage of scissors, so as to avoid hurting people when scissors collide and fall.
5. Oil regularly to keep the tool shaft lubricated.
6. Develop the good habit of cleaning scissors at ordinary times.
The most basic and quickest way to maintain scissors:
1. First, use a soft brush to remove the dust and dander on the scissors, especially the fine seams (such as screw holes and tooth seams).
2. Dip in a little oil (lubricating oil, sewing machine oil, etc.). ) Wipe the scissors carefully on a clean cloth, which can not only remove dirt, but also increase lubrication and prevent rust.
3. Finally, wipe the scissors from beginning to end with the part of the cloth that is not stained with oil, so as to avoid excess oil from being stained with dirt or dander.
The maintained scissors not only effectively prolong the service life of the scissors, but also look bright and clean, and the guests will also let you serve with peace of mind.