There is only one audio output hole at the back of the main unit, which is the green jack for inserting the subwoofer. The two plugs of your two stereo systems should be plugged into the subwoofer jack. Generally, the audio interface cannot be directly connected to the computer.
1. center/bass audio output (orange) connector, plug in the center/subwoofer. 2. Rear audio output (black) interface. 3. Audio input (light blue) connector (connected to a tape player or other audio source). 4. Headphone/audio output (light green) interface, plugged into the main speaker.
Blue is the degree of audio input port, which is used when the computer needs to synchronize the audio with the TV connection. Black is the rear surround speaker interface, which is required when using more than four channels. Green is the audio output, such as our commonly used headphones and two-channel speakers.
The green jack is stereo audio output, which is used to connect headphones and speakers; Pink jacks are generally connected to microphones; The blue jack is an audio input and is usually connected to an external audio output signal.
How to plug the computer audio plug into the general computer speaker's two plugs are: 5 plugs, that is, audio input plugs, which can be directly plugged into the computer audio output interface. Generally, green represents the stereo output USB plug, which is used to get electricity from the computer and for audio.
There are generally two rows of three round holes on the back of the computer host for connecting the microphone and earphone audio. Generally, one stereo is a USB interface and the other is a round plug. The USB port is inserted into the USB port, and the round plug is inserted into the middle of the first row behind the computer host.
Prepare the speaker and computer host. Turn the sides of many jacks on the computer mainframe upside down. Aim the two plugs of the speaker at the main computer, and insert the round head wire into the green or red hole. The flat cable of the speaker is plugged into any USB jack on the computer host.
First, take out the prepared computer stereo and observe the interface of the stereo. General stereos have round head interfaces and USB interfaces. Then turn the back of the computer host over and take out the audio interface to compare the interface style of the host. Then plug the round head connector of the stereo into the audio connector of the computer.
Green: Audio output. Mainly connected to headphones and audio. Pink: Microphone access. Blue: Audio input. You can output audio to a PC. Gray: Interface around the speaker. Black: Rear surround speaker interface.
Prepare the speaker and computer host. Turn the sides of many jacks on the computer mainframe upside down. Insert the two plugs of the speaker into the computer host, and insert the round head wire into the green or red hole. The flat cable of the speaker is plugged into any USB jack on the computer host.
How to connect the audio connector?
Then unscrew the audio cable connector on the back of the stereo. Wind the audio cable around the audio interface (yellow followed by red. Silver followed by black). If you receive audio and video, it is usually used when connecting TV. We also need to prepare audio and video wiring.
First, prepare materials for audio wiring, such as audio cable, pliers and audio. Cut the audio line to a suitable length with pliers, and the length depends on the distance of the audio line. Remove the plastic from both ends of the audio cable to expose the audio cable.
First, take out the prepared computer stereo and observe the interface of the stereo. General stereos have round head interfaces and USB interfaces. Then turn the back of the computer host over and take out the audio interface to compare the interface style of the host. Then plug the round head connector of the stereo into the audio connector of the computer.
First, take out the prepared computer stereo and observe the audio interface. Generally, there are round head interface and USB interface. Turn one side of multiple jacks of the host, take out the audio interface, and compare the interface styles of the host.
The stereo has two plugs, which one plugs into the computer?
The desktop audio interface is generally behind the host. Light green is the audio output jack (that is, the audio jack), and pink is the computer microphone jack. There are two sockets at the end of the speaker, one is round head and the other is USB interface. Insert the round plug of the speaker into the green plug in the middle.
The specific operation steps are as follows: prepare the speaker, insert the round head interface of the speaker into the audio interface behind the computer host, as shown in the figure, and then insert the usb socket into the USB interface of the computer host.
Prepare the speaker and computer host. Turn the sides of many jacks on the computer mainframe upside down. Insert the two plugs of the speaker into the computer host, and insert the round head wire into the green or red hole. The flat cable of the speaker is plugged into any USB jack on the computer host.
Prepare the speaker and computer host. Turn the sides of many jacks on the computer mainframe upside down. Aim the two plugs of the speaker at the main computer, and insert the round head wire into the green or red hole. The flat cable of the speaker is plugged into any USB jack on the computer host.
Which interface is the computer stereo plugged into?
Prepare the speaker, computer speaker interface Insert the round head interface of the audio into the audio interface behind the computer host, as shown in the figure, and then insert the usb socket into the USB interface of the computer host.
The speaker jack at the back of the computer host is shown in the following figure: The audio input/output port in the above figure has three small holes for connecting the speaker, earphone and microphone respectively. There are different signs on it, for example, the speaker is a trumpet icon, the earphone is an icon of the earphone, and the Mike is marked with Mike's logo.
There are two general computer audio interfaces, round interface and USB interface. The picture shows the back of the computer case. We can connect the circular connector to the audio I/O interface in the figure and connect the USB interface to the USB interface in the figure. As shown in the figure, the computer audio is inserted correctly.
Computer audio is a computer peripheral hardware, which is connected with the audio output interface of the sound card of the computer mainframe shell through wires (also wireless audio connected through Bluetooth) and can output computer sound. Most of them are used to listen to music and watch videos.
Where are the two wires plugged into the stereo?
1. If it is a passive speaker, just connect the speaker cable to the speaker post in the middle of the back of the power amplifier. Pay attention to the positive and negative poles of the horn wire.
2. Audio cables should be connected correspondingly, that is, one end should be plugged into the audio output socket on the audio source appliance, and the other end should be connected to any group of audio input sockets on the left side of the back of the power amplifier.
3. Connect the black wire of the speaker to the red interface of the power amplifier, and connect the black and white wire to the black socket of the power amplifier. If it is convenient to open the back cover of the speaker, it is best to open the back cover and actually check the wires on the speaker interface inside. That wire is connected to the "+"level and that wire is connected to the red interface of the power amplifier.
4. The two lines of the speaker need to be switched by audio. Switch the first two wires to 1, and then plug in the computer. It is better to input and output audio after connecting the computer. If the desktop must be switched, just plug it in.
5. The connection mode of several wires on the stereo is as shown in the figure: the lower wire in the figure is a double-core shielded wire, and the outer copper wire is a shielding layer; White is the left channel and red is the right channel, which can be connected as shown below.