1. First, we prepare some apple bubbles.
2. Then, we cut the apple foam into our favorite shape with scissors, and the size is controlled by ourselves, which is similar to the five-pointed star.
3. Choose a small house with branches. According to our existing materials, this can be done. We'll cut this off and fix it in the small house.
4. Cross-fix the foam flowers.
5. After brushing all the red pigments, you can turn them into handmade flowers.
Lesson 2 of making foam flowers is: cut a circle from a piece of foam. This will be the petals of calla lily in full bloom. The circumference of a circle can be small or large.
1, fold the circle in half. Be sure to fold it neatly, so that the shape of calla lily will be better. Change the circle and create the shape of a round heart. The shape should be smooth.
2. Uplift between small cracks. This makes it easier to form a cylindrical shape with foam calla lilies in full bloom.
3. Cut a yellow tube in half, and then fold it in half. Screw the two ends together. This will become the stamen of lily.
4. Gently apply hot melt adhesive to the gap between the two humps, and erect the upper end of the folding tube in the middle of the petals, with the protruding part about 1? 2 inches (1.3 cm).
5. Put a little hot glue in front of the tube at the crack of lily. Take both sides of the lily (where you made the incision), clamp the tube and press hard to make them stick to the hot glue.
6. Make a handle with a green pipe cleaner and connect it to the lower end of the yellow pipe. The yellow pipe looks like a green stem.
7. If you want to make violets, use purple foam and cut a circle from the purple foam. But if you want to make a different flower, other colors are ok.
8. Make an incision on the circumference. Cut the V shape from the petals. Make each petal look like a small v. Cut a small circle with white foam. This will be the center of the flower.
9. Stick the circle in the middle. Put a small piece of hot glue between violets, and then stick a small white circle on the glue.
10, curl the petals and pinch each petal so that they will stand upright and produce a three-dimensional effect instead of lying flat.
1 1. Insert the stem behind the flower. Insert it behind the center of the flower with a green tube.
12, cut the foam board in half, you can choose any color you like, put a line of hot glue on the bottom of the foam board, and then stick the top of the foam board on the glue.
13, leading edge. Cut a straight line from the annular adhesive edge of the folded part, and then roll up the foam. Start with one short edge and roll the foam to the other end. After rolling, pat some hot glue along the other end and press it on the roll. Now start from one end of the foam and start rolling in the opposite direction.
14, flowering. When the glue dries, pull the flowers off the petals with your fingers. It's done.