Installing bottom plate
When installing the bottom plate, the joints must be aligned. After installing the bottom plate, gently push it by hand. If it is firm and does not shake, you can continue to install the next step.
Installing back plate
After the backplane is installed, the backplane should be installed next. At this time, we should pay attention to the need to maintain a 90-degree right angle between the back plate and the bottom plate, so that the force will be uniform and avoid errors and skew.
Installing side plate
Then we have to install its side plate, and it should also keep a 90-degree right angle directly with the back plate. If a little skew is found during installation, it must be corrected in time.
Installing roof
At this time, its main body is basically completed, or the top plate is not installed. When installing, we must pay attention to the stability of the interface and the firmness of the top plate, so as to complete the overall structure of the combined wardrobe.
Install the remaining parts.
Then we can install cupboard doors, drawers and clothes rails one by one. When these parts are installed, the installation of the whole wardrobe is completed.
Pay attention to the size of each plate.
Before installation, we need to know the dimensions of each part of the board accurately and clearly know which part is this and which part is that. In case of confusion. Follow the steps in the installation instructions step by step, and don't skip the steps, otherwise it will directly affect the installation effect of the wardrobe. And its spare parts must be checked completely and not lost, otherwise it will easily affect the stability of the wardrobe.
caution
Because its main body is wood, it has a certain weight, so we must pay attention to safety when installing it, avoid bumping and bumping, and also avoid the board being damaged and bumped.