Step 1: Find a piece of cardboard. ?

Step 2: Cut out 12 trapezoids with the same size. It is for the main body of the lantern. ?

Step 3:?

Make two hexagons as the bottom and top of the lantern. ?

This hexagon is more complicated to make. Here are a few small steps to explain.

1. Draw a straight line on the cardboard first and determine a center point on the straight line?

2. Use a protractor to find the point between 60 degrees and 120 degrees?

3. Connection, the prototype of hexagon?

4. Take the short side size of the trapezoid made in the first step as the side length of the hexagon?

Ok, have you finished 12 trapezoid and 2 hexagon?

Step 4:?

Hollow out the upper 12 trapezoid and two hexagons. Please note that one of the hexagons is the bottom, so leave room for candles. ?

Step 5:?

Stick cellophane on the hollowed-out part of the lamp body. No cellophane was found, so this step is lazy. ?

Step 6:?

Glue every two long sides of the trapezoid together. ?

Step 7: Glue the short side of the trapezoid and the hexagonal side together (as the bottom of the lantern).