Installation method of light strip: Before installing the light strip, the specific installation position should be determined and marked. And when preparing for installation, tear off the layer of self-adhesive on the surface of double-sided tape, put it in the position to be pasted, and then press it tightly and stick it firmly.

If you encounter a bend, or the length is different, you can cut it. However, it should be noted that led lamps are generally connected in series and can be cut every three beads. Too long can be reduced, too short can be welded.

What should I pay attention to when installing the light strip?

1. Before installing the light strip, be sure to prepare all the necessary raw materials and tools, so that it will be open when installing, so as to avoid being in a hurry.

2. After the installation location is selected, it is necessary to clean up the dust and stains in this area to avoid the existence of particles, which will affect the normal installation and will easily fall off in the later stage.