Flute is a traditional national musical instrument in China, which is widely used in various occasions and music performances. To play flute, you need to master the correct fingering in order to play beautiful music. The following is the fingering diagram of the flute.
First, we need to know the basic structure of the flute. The flute consists of four parts: mouthpiece, blowhole, finger hole and tail hole. The mouthpiece is the top of the flute, where the player plays. Blowhole is a small hole above the flute, which is used to control the pitch of the flute. Finger holes are a row of small holes above the flute, which are used to control the timbre of the flute. The tail hole is a small hole at the bottom of the flute, which is used to adjust the timbre of the flute.
Next, let's look at the fingering diagram of the flute. There are many modes of the flute, among which C, D, E, F, G, A and B are the most commonly used. The fingering of different modes is slightly different, but the basic principle is the same.
The fingering diagram of flute in C key is as follows:
1. The blowing port remains unchanged, all blowing holes are closed, all finger holes are closed, and all tail holes are closed. Blow and make the lowest C sound.
2. The pores are unchanged, and the pores are completely closed, that is, the finger holes are completely closed and the tail holes are fully opened. Blow and make the lowest C sound.
3. The blowhole remains unchanged, the blowhole is completely closed, the finger hole 1 is opened, and the tail hole is completely closed. Blow and make a d sound.
4. The blowing port remains unchanged, the blowing holes are all closed, the finger holes 1 and 2 are opened, and the tail holes are all closed. Blow and make an e sound.
5. The air holes remain unchanged, all the air holes are closed, the finger holes 1, 2, 3 are opened, and all the tail holes are closed. Blow and make an f sound.
6. The air holes remain unchanged, all the air holes are closed, the finger holes 1, 2, 3 and 4 are opened, and all the tail holes are closed. Blow and make a g sound.
7. The air holes remain unchanged, all the air holes are closed, the finger holes 1, 2, 3, 4 and 5 are opened, and all the tail holes are closed. Blow and make an a sound.
8. The air holes remain unchanged, all the air holes are closed, the finger holes 1, 2, 3, 4, 5 and 6 are opened, and all the tail holes are closed. Blow and make a b sound.
The above is the tune of the flute in C, and the fingering of other tunes is similar. It should be noted that when playing, attention should be paid to the strength of blowing and the control of blowing holes in order to play beautiful music.
In a word, learning the fingering of flute requires patience and practice. Only by practicing constantly and mastering the correct fingering can we play high-quality music.