In order to divide the specific functional sections in the wardrobe, there are often many partitions and a series of drawers. In the drawer, we can put some odds and ends. For example, some accessories are good suggestions. So how should the drawers of the wardrobe be designed? Where should we start with the choice of corresponding styles, the consideration of materials or the study of dimensions? What I want to explain to you today is the design of wardrobe drawer size, so you can analyze it in detail.

First, the wardrobe drawer size

The upper edge of the top drawer leaves the ground; 60MM drawer is 400~500MM deep. The common cabinets in the stacking area are designed with a width of 330-400mm, a height of not less than 350mm, and a spacing of 400-600mm, which is too small and too big to hold clothes.

Second, what is the size of the wardrobe?

Overall size of wardrobe: if the wardrobe is customized to the top, it is 2400mm high and 1800mm long, divided into two units, 900mm long and 600 mm deep ... This not only facilitates practical use, but also greatly increases the firmness of the wardrobe. If the wardrobe is placed on the wall corresponding to the bed, the distance between the wardrobe and the bed should be greater than 900mm, and if the wardrobe adopts a sliding door, the distance can be smaller. In order to prevent moisture, a skirting line within 70mm can be set at the bottom of the wardrobe.

Size distribution of wardrobe: the area below 650mm of wardrobe is generally designed to put small items, the area of 650- 1850mm is designed to put common clothes in season, and the area above 1850mm is designed to put uncommon items and out-of-season clothes. Generally, it's 2 100mm from the lower cabinet, and the rest are all returned to the upper cabinet.

Wardrobe door design: If the sliding door is two doors, it cannot be designed at the position of 1/2; If it is three doors, it cannot be designed at 1/3 and 2/3 positions; Otherwise, the drawer can't be opened, and the position of four doors and above will not be considered. In addition, the position of the sliding door should leave a sliding position of 75-80 mm.

Bedding area of wardrobe: According to the height of the quilt at ordinary times, the bedding area is usually 400-500mm high and 900mm wide. Because it is inconvenient to take things, the upper end of the wardrobe is usually used as a bedding area, which is also conducive to moisture.

Wardrobe stacking area: the stacking area can be designed as an adjustable raised floor, which is convenient to change the height or change to other areas according to the needs. For example, after hanging more clothes, you can put a hanger and change it into a coat area. This area is mainly used for stacking sweaters, T-shirts, slacks and other clothes. Arranged between the waist and eyes for easy access. The width of the stacking area should be between 330 and 400 mm and the height should be between 350 and 400 mm.

Wardrobe long clothing area: the height of the long clothing area is 1400- 1500mm, and the depth is not less than 1300mm. It is mainly used for hanging windbreakers, down jackets, coats, dresses and other long clothes. You can design the width of the long clothes area according to the number of long clothes you own. Generally, 450mm is wide enough for one person to use.

The above is recommended for everyone's attention in terms of wardrobe drawer size, analysis and comparison. Therefore, it is basically impossible to give you an accurate wardrobe drawer size, because the drawer design should be customized according to the characteristics of the structure and area of the wardrobe itself, and the storage capacity of the wardrobe should be further clarified in consideration of our storage needs, so as to achieve satisfactory results. Please analyze the specific situation, and you can refer to the above for understanding.