Some necessary tools, accessories and tape measures are needed when making colored ball decorations, which are mainly used to measure the sizes of various parts in colored ball modeling. Various types of fishing lines, tapes and ribbons can play a decorative role in the modeling of colored balls. Most of the electric air compressors used in the color ball decoration industry are operated by one person, equipped with different types of tuyeres, plug and play, and easy to carry. Steel wire mesh is a kind of grid structure, which is used to make balloon-shaped supports. Iron wire, fixed balloon, PVC pipe, on which the balloon can be wound.
Making colorful ball columns: balloons are made into linear structures. First, two balls of the same color are inflated, and then the ball mouths of the two balls are wound and fastened to form a pair of balls. The colors of the ball pairs should be different. Two pairs of balls are intertwined, and four balls are tied into a bundle. After that, the production of each group of ball bundles is completed in the same way. One hand holds the ribbon, and the other hand straightens the first group of ball bundles, and wraps and binds the ribbon in the center of the ball bundles in an "8" shape. When winding the second group of ball bundles with colored ribbons, rotate the second group of ball bundles clockwise (or counterclockwise) and stagger the distance by half a ball, and put them in the grooves of the first group of ball bundles tightly, and then pull the colored ribbons to wind and tie them tightly. Note: Be sure to wait until the two groups of ball bundles are closely attached, and then wrap and fix the ball bundles with colored tape, that is, "push the ball first, then pull the wire". This linear colored ball column can be used not only as a decorative colored ball alone, but also as a component for making large colored balls, which is the basic element for making colored balls. Colored ball columns can also be wound on PVC pipes. Connecting a single PVC pipe into a long pipe is similar to winding with colored ribbons. In addition, attention should be paid to the consistency of color and rotation direction of the two colored balls in the production process to form spiral colored lines. PVC has certain rigidity, which is convenient for making colored ball columns into balloon arches. In this way, the practical colored ball arch is completed. This shape is used in many occasions and is very practical.
Production of balloon chain: A balloon chain is a shape formed by connecting a single balloon end to end. Choose this needle balloon with a pointed tip. The color of the balloon is selected according to the design needs, and it is inflated for standby. The balloons are connected end to end, and the colors can be changed freely to form a long balloon chain, and some colored balls can be added between the balloons in the ball chain for decoration. Balloon chain is also a linear modeling of balloons. Because it is a single ball chain, it is easy to make into various shapes. It is a common component in large-scale colored ball modeling, and can also be used alone.
Colored ball net: this kind of colored ball net modeling is to insert the pattern of colored balls on the metal net. Firstly, the grid pattern is designed on the grid diagram to determine what balloons to put on each grid, and then the colored balls are inserted into the corresponding grids with this special metal grid frame. Generally, balloons are filled in the outline of the pattern first. These places are more critical, determine the pattern shape of the work, and then fill the outline with balloons. Finally, filling balloons of another color outside the contour line can highlight the shape of the work. This kind of heart-shaped grid balloon diagram is done, and many large and complex grid balloon shapes are also made in this way. The manufacturing process is not difficult, the key is the design and calculation of the pattern.
Magic modeling of colored balls: balloons of various colors are made into various cartoon shapes, just like magic, which are welcomed by children. The magic modeling of colored balls is done with this cylindrical balloon. First, the balloon is inflated. Generally, to do any modeling, it is necessary to leave an uninflated ball skin at the tail of the ball skin and tie the balloon tightly and seal it. Then according to the design proportion, the sphere is twisted into bubbles of different sizes. Generally, the left hand holds the ball and the right hand pinches the cylindrical sphere. At the same time, both hands rotate the sphere reversely to twist, and the twisting action does not exceed two or three turns at most. The magic shape of colored ball is to weave all kinds of lovely cartoon shapes with this kind of ball bubble. Look, a cute little mouse is ready.
Production of colored ball guider: The colored ball guider is a decorative colored ball, which guides the way in assembly occasions. Generally, there is a floating balloon above and a balloon base below. Floating balloons are usually filled with helium. First, take a cylinder filled with helium and install a special inflation valve. The valve must be installed firmly to prevent air leakage. Inflate the balloon to be used, and tie the balloon with a ribbon after knotting. Helium is lighter than air, and the inflated helium balloon can float in the air for a long time. Tie the balloon into a bundle in the same way as before. Put a balloon in the tap water pipe and put a proper amount of water in it. Inflated balloons are relatively heavy. Tie it with the prepared balloon, thus making a balloon base that can be fixed on the ground. Then tie the helium balloon to this base and decorate it with colored gauze towels, and you can make a balloon guide.
Large colored ball modeling: This is a pair of large swan modeling, which needs a lot of balloons. First, according to the design needs, fill the spare balloons. Take several PVC pipes for example, because the balloon line required for large-scale modeling is also very long, it is necessary to connect a single PVC pipe into a very long pipe. The method and technical requirements for winding balloons on PVC pipes are the same as before. Large-scale colored ball modeling needs special support, and a solid support is the foundation of colored ball modeling creation and the guarantee of on-site safety. Put the made colored balls on the bracket according to the design drawing and fix them with iron wire.
Color ball art concept
Color ball art is a balloon drawn by traditional toys. Through the understanding, conception and creation of the master artists, it has become an alternative art form with certain image, emotion and artistic conception in modern works of art.
The art of colored balls conveys information and regulates emotions for people with its bright decorative colors and vivid artistic modeling. Its huge creative space, virtual reality modeling ability and "multimedia" decorative color will effectively break and transform the traditional arts and crafts thinking mode limited to "realism". Although it is new, some aspects need to be improved and improved. However, the first is the initial formation. Color ball art not only has its own professional theory and skills, but also has a unique style that other plastic arts can't replace; It not only has the general function of visual art, but also combines with materials, skills and works, which has distinct practical and economic value. For us professionals who are engaged in the art of colored balls, it is indeed a challenging event to explore, develop and perfect this kind of "imported foreign toys" which originated from abroad and is popular all over the world in China, especially to build it into an art form that adapts to modern aesthetic consciousness and is loved by the broad masses of our people.