Current location - Plastic Surgery and Aesthetics Network - Wedding supplies - I have a dream crystal bead curtain. How to make it?
I have a dream crystal bead curtain. How to make it?
Seeing all kinds of bead curtains and crystal beads shining in all kinds of light in the shopping mall, do you also feel heartbroken and dream that you can have this kind of "luxury" and this kind of romantic dream? The following small series will introduce you to the production method of crystal bead curtain, so that you can realize your dream!

1. Pay attention to material selection.

Be careful when choosing crystal beads. Don't buy those light plastic (acrylic) beads, buy those with a certain amount of silicon dioxide in their hands. It is suggested to find a shop selling crystal beads and acrylic beads, and then buy them after identification. Distinguish the quality of crystal beads from their luster. The first thing to prepare is to prepare the position of the crystal bead curtain.

2. Design the pattern of bead curtain

The most important thing is the span and length of the whole curtain. It is generally recommended that the bead curtain spacing be 5- 10cm. And the distance between the beads. These are determined, and the amount of materials can basically be determined. According to the above calculation, the amount of crystal beads needed, plus the loss of about 10%, is similar to the replacement in the future.

Then go online to find the relevant basic knowledge. It is recommended to visit the online crystal shop more, where there is a lot of information. Although it is not necessary to buy things from his family, it is not without benefits to study in the past.

Step 3 buy crystal bead curtain materials

This is the most critical and important step. Of course, the best bead curtain crystal is imported crystal, because of its high silica content and certain active S content, so it has good light transmittance. After treatment, it can emit light even in an environment with only a weak light source. Absolutely make girls scream.

Speaking of domestic crystals, the most important place of origin should be Guangdong. Tx, who has bought crystal lamps, also knows that most crystal lamps in China come from there. JS wholesales crystal lamps from Guangdong to Shanghai, and basically has the purest profit of 100% when it changes hands.

4. Preparation of crystal bead curtain material

Here mainly refers to auxiliary materials and tools, mainly used to make spherical bead curtains.

1, jumper. There are two kinds, steel wire and fishing line. It is said that a good fishing line is also good, but the family did not dare to use it, so they chose a steel wire. Some of the Steel Wire Town God Temple sell 100 meter, 8 yuan.

2. Beads. It's a little red bead in the photo, which is used for ornament. Options. In terms of packaging, it is sold in Chenghuang Temple, which is not expensive. One pack is usually enough.

3. Positioning ring (positioning clip? ) is used to fix each bead. An iron ring with a diameter of about 1-2mm and a height of 1-2mm. The steel wire passes through the middle, and then the pliers clamp it and fix it, so that the crystal beads can be clamped.

4. tracking. You can ask the curtain shop. On the balcony, use the corner track where the screen window can be hung, and then ask the boss to drill and click on the hole.

5. Tool needle-nosed pliers. It is used to clamp the positioning clamp.

6. Impact drilling rig. You'd better borrow this from the curtain owner or have a plumber at home. It is used to punch holes in the ceiling and fix the track with expansion nails. If you make a spherical bead curtain, it's basically like this. If you make octagonal beads or something, you need iron rings.

Step 5 make crystal bead curtain

The production is simple, but there is not much technical content. That is to say, put the beads one by one, and clamp them with locating clips where they need to be spaced. The key is a head and a tail.

The tail of the bead curtain is to turn the steel wire back, bypass the last bead, pass through the position between the last bead and the penultimate bead, pass through the penultimate bead, pull out the wire and fix it with a clip. It doesn't matter.

As for the head, put the thread left by the head through the hole in the track and hang the whole bead curtain. Then thread the thread into beads, thread it again when you come back, and then clamp the thread end with a positioning clamp, and it's done.