1. Wood structure. This structure is mainly composed of 9cm synthetic plate dragons, each 9cm in size is 1 220 mm× 2440 mm. Generally, a plate can be made into a square wall of about1,that is, half the keel and half the panel, and then nailed together with other plates. If the wall needs to bear load, you can choose the composite version of 12cm, which can make the screws hard.
If the surface needs painting or spray painting, it is necessary to use blockboard, first paint the surface with putty powder, and then paint or spray paint, but it should be noted that this operation should be carried out in a dust-free space. The advantages of wood structure are diverse and comprehensive; Disadvantages are waste and environmental protection.
2. Truss structure. The biggest advantage of this structure is low cost, especially the combination of truss and painting, but the disadvantage is also obvious, that is, the grade is slightly lower and the company image cannot be well established.
3. Outline structure. In the early days, the profile structure composed of flat aluminum, exhibition boards and balun columns was mainly used to make standard booths, mostly 9 square meters or 18 square meters, which was a convenient and affordable way for small enterprises to participate in the exhibition.
After the 1990s, aluminum square columns can make the shapes of booths more and more diversified. The advantages of this structure are economy and environmental protection; The disadvantages are limited structural combination and complicated installation.
4. Standardized components. This structure is very mature abroad, and its popularization and application in China is still in its infancy. The aluminum profile of the main frame of the structure is flexible and convenient, which can be combined into various exhibition effects, and the visual effect is more international, reusable and convenient to transport and carry. The bumblebee exhibition feels that it can reduce the exhibition cost very limited.